Reply To: eon Labs USB Z-wave (gen5) installation

Free domotica! Forums How can I …? Synology NAS eon Labs USB Z-wave (gen5) installation Reply To: eon Labs USB Z-wave (gen5) installation

#2620

33ced
Participant

bonsoir je viens de reessayer et ma clé n’est pas reconnu voici le dmesg et le log zwave
non je ne vois rien

DS213> dmesg | grep tty
[ 0.000000] Kernel command line: root=/dev/md0 rw syno_hw_version=DS213pv10 console=ttyS0,115200 ip=off ihd_num=2 netif_num=1 ip=off initrd=0x2000040,4M
[ 5.916264] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
[ 5.922969] console [ttyS0] enabled, bootconsole disabled
[ 5.933970] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42) is a 16550A
[ 43.286060] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
DS213>

il n’y a pas de ligne du type « usb 1-1.3: cp210x converter now attached to ttyUSB0 ». ou ttyACM0

2016-01-25 21:27:02.477 Always, OpenZwave Version 1.3.0 Starting Up
2016-01-25 21:27:02.477 Info, Setting Up Provided Network Key for Secure Communications
2016-01-25 21:27:02.478 Warning, Failed – Network Key Not Set
2016-01-25 21:27:02.478 Info, mgr, Added driver for controller /dev/ttyACM0
2016-01-25 21:27:02.483 Info, Opening controller /dev/ttyACM0
2016-01-25 21:27:02.483 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-25 21:27:02.483 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-25 21:27:02.483 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-25 21:27:02.483 Warning, WARNING: Failed to init the controller (attempt 0)
2016-01-25 21:27:07.483 Info, Opening controller /dev/ttyACM0
2016-01-25 21:27:07.483 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-25 21:27:07.484 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-25 21:27:07.484 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-25 21:27:07.484 Warning, WARNING: Failed to init the controller (attempt 1)
2016-01-25 21:27:12.484 Info, Opening controller /dev/ttyACM0
2016-01-25 21:27:12.484 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-25 21:27:12.484 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-25 21:27:12.484 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-25 21:27:12.484 Warning, WARNING: Failed to init the controller (attempt 2)
2016-01-25 21:27:17.484 Info, Opening controller /dev/ttyACM0
2016-01-25 21:27:17.485 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-25 21:27:17.485 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-25 21:27:17.485 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-25 21:27:17.485 Warning, WARNING: Failed to init the controller (attempt 3)
2016-01-25 21:27:22.486 Info, Opening controller /dev/ttyACM0
2016-01-25 21:27:22.486 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-25 21:27:22.486 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-25 21:27:22.486 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-25 21:27:22.486 Warning, WARNING: Failed to init the controller (attempt 4)
2016-01-25 21:27:22.486 Detail, contrlr, Notification: DriverFailed
2016-01-25 21:27:22.486 Warning, WARNING: Tried to write driver config with no home ID set
2016-01-25 21:27:22.486 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x00000000