Blocky don't run my scenes

Free domotica! Forums Report a bug Blocky don't run my scenes

Viewing 15 posts - 16 through 30 (of 30 total)
  • Author
    Posts
  • #2112
    Avatarbouille
    Participant

    Hi everyone,
    I have the same problem, my scenes doesn’t work.
    I followed the procedure to debug the core and i have some message:

    2015-12-12 21:08:23.035 Message Finished, remove it from the stack (0|HUB|HUB|AUTORESTART)
    2015-12-12 21:08:31.118 Forwarding message : 0|HUB|HUB|AUTORESTART
    18460
    RUN
    NRUN
    2015-12-12 21:08:32.352 Message Finished, remove it from the stack (0|HUB|HUB|AUTORESTART)
    2015-12-12 21:08:41.448 Forwarding message : 0|HUB|HUB|AUTORESTART
    18728
    RUN
    NRUN
    2015-12-12 21:08:42.737 Message Finished, remove it from the stack (0|HUB|HUB|AUTORESTART)

    I can managed all my z-wave device with imperihome or directly by PulseStation, but my scenes do not work.

    P.S: I bought recently a 6 ports powernode GreenWave and 6 in 1 multisensor z-wave plus aeon labs

    #2113
    MikaMika
    Keymaster

    As I see the core service didnt receive the Event Message. So it’s normal that the scene doesnt trigger.
    Can you first take a look at the zwave service to see if an event is triggered.

    Can we also have more info about what is not working, what event should be trigger in your case ? With which devices ? …

    #2118
    AvatarMarcoparigi
    Participant

    yes i ran it from ssh as root is it a problem ?
    The Database Service is installed and when i click on Garaphic section i got the following message : “Loading data…” all the time 🙁

    #2122
    AvatarK.Rens
    Keymaster

    I was able to reproduce the issue.
    My scenes also stopped working.
    We are currently investigating this.

    For graphic: please create a separate topic.
    Probably your database connection is not set-up properly.

    Kind regards,
    K.Rens

    #2126
    MikaMika
    Keymaster

    It seems that the problem is linked to the associations.
    Maybe related to new version of the openzwave library.

    The next version is coming soon so normally you can get back a normal situation…

    #2131
    Avatarbouille
    Participant

    Hi Mika,
    thanks for your response.
    I’m waiting the new version for testing it.

    #2139
    Avatarbouille
    Participant

    Hi,
    after update the service, my scenes not working.
    I reinstal pulse station and recreated all my services (without use the backup service).
    So now i test some function and it looks run.
    I try all the function after (maybe tonight).

    #2154
    MikaMika
    Keymaster

    If your are on 1.3.0, dont forget to re-save all your scenes. I changed the way to execute the scenes to be more faster.

    #2167
    Avatarcoldbringer
    Participant

    Hi, what do you mean “re-save”? Open the scene (see nothing), save the scene, open again? This way I would expect my scene to be overwritten with a blank scene.

    #2168
    AvatarK.Rens
    Keymaster

    If your scene looks empty it’s probably corrupt.
    You can try saving it again, but will probably not work.
    You may have to delete it then and recreate it.

    Normally this only happens if your scene contains a device that has been removed.

    After the update your scenes should just appear if you open them.
    If you then press the save button, it will start working again.

    • This reply was modified 5 years, 1 month ago by AvatarK.Rens.

    Kind regards,
    K.Rens

    #2178
    AvatarCoyote
    Member

    Hi,

    I just installed the new version 1.3.0 (new total installation, not update), and made a new ZWave association.

    But it still not works… I can’t make a « Device Event ==’ in a blocky rule with my Fibaro FGM-001.

    Always the same ‘basic’ rule :

    If [ Device Event == [ Event Device : ‘Fibaro_FGM’ value : On ] ].
    do [ Device ‘Fibaro_Plug’ switch new value On ]

    The detection is oki on the Zwave log file, under the dashboard too.. But not in scene services (maybe the new scene service ?) and nothing in the core log too about this event.

    I’ve made it 2 times, and it never works ..

    Thx

    JMarc

    #2213
    MikaMika
    Keymaster

    Hi,

    Is the association OK ? I mean did you see that “zwave-1” (your controller) is associated to your motion sensor.

    Mika

    #3784
    AvatarGrobMo
    Participant

    Hey everyone,

    is there a solution for this problem? My blocky rules are not running to! Do you have some I should check first?

    Thanks

    #3785
    AvatarGrobMo
    Participant

    I forgot: the Core, Scene and z-wave Service are running without errors.
    The devices itself run properly.

    #3789
    Avatardjandib
    Participant

    Hi GrobMo,
    I had the same problem again and again.
    And solved it everytime again.
    I work a lot with “complex” scenes, use a lot of manually php blocks and use a lot a self written pushover-block and…. I work a lot with copy and paste.
    If only one “;” is missing the whole scenes will not work.
    How did I solved?
    First I put a small block healthcheck in the end of every scene:
    IF vdevice Helathcheck = true
    THEN Pushover “Scene XY_Number=OK”
    Then let it run. Maybe you find quick a “wrong” scene
    Second:
    Put Blockly “Run manually” in the head of each scene and write a new, simple scene:
    IF Time=current time
    THAN Pushover “Yeah”
    Then let it run. Maybe you find quick a “wrong” scene

    Note: Scenes always run in the alphabetic-order after the prescene run.

    Good luck.
    Andi

Viewing 15 posts - 16 through 30 (of 30 total)
  • You must be logged in to reply to this topic.