Controller ZME_UZB1 compatible

[hermodParticipant]

I cannot get my ZME_UZB1 to work. I am trying this controller with one power switch. I managed to see the devices one time. Now i cannot see them at all. I may have managed to delete the device. Have tried to reinstall the application. But still not seeing the controller and the powerswitch.

Any idea?

[MikaKeymaster]

Can you check what the zwave log said ? Especially at the beginning when he try to connect to your dongle…

[hermodParticipant]

Here is what is say in the start of the log files.

2015-12-27 19:19:42.269 Always, OpenZwave Version 1.3.0 Starting Up
2015-12-27 19:19:42.270 Info, Setting Up Provided Network Key for Secure Communications
2015-12-27 19:19:42.270 Warning, Failed – Network Key Not Set
2015-12-27 19:19:42.271 Info, mgr, Added driver for controller /dev/ttyACM0
2015-12-27 19:19:42.273 Info, Opening controller /dev/ttyACM0
2015-12-27 19:19:42.273 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2015-12-27 19:19:42.273 Error, ERROR: Cannot get exclusive lock for serial port /dev/ttyACM0. Error code 11
2015-12-27 19:19:42.274 Info, Serial port /dev/ttyACM0 opened (attempt 1)
2015-12-27 19:19:42.274 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-27 19:19:42.274 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2015-12-27 19:19:42.274 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2015-12-27 19:19:42.275 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2015-12-27 19:19:42.275 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2015-12-27 19:19:42.275 Detail,
2015-12-27 19:19:42.275 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-27 19:19:42.279 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x39, 0x00, 0x01, 0x95
2015-12-27 19:19:42.280 Detail,
2015-12-27 19:19:42.280 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
2015-12-27 19:19:42.280 Info, contrlr, Static Controller library, version Z-Wave 3.99
2015-12-27 19:19:42.280 Detail, Node045, Expected reply was received
2015-12-27 19:19:42.280 Detail, Node045, Message transaction complete
2015-12-27 19:19:42.280 Detail,
2015-12-27 19:19:42.280 Detail, contrlr, Removing current message

[hermodParticipant]

Suddenly it works. I do not know what i did but i removed the controller. restartet service (it did not start) and inserted the controller again. Now i just added a device, pushed the button on the device, and it’s all back.

[K.RensKeymaster]

Error code 11 indeed means: try again.
It was in the beginning of your logs, it a default linux error.

Kind regards,
K.Rens

[Author]

Posts