Fibaro Roller Shutter

Free domotica! › Forums › How can I …? › Synology NAS › Fibaro Roller Shutter

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Mika Mika 2 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 29, 2015 at 2:07 pm #1041

    coldbringer
    Participant

    Hi,

    first of all: thank you for providing such a great software for free. I hope I can get it working properly.

    I have a DiskStation 213+ with the Aeon Labs Z-Stick Gen5 (Z-Wave plus). My first Z-Wave device is a Fibaro Roller Shutter. In order to calibrate the roller shutter (i.e. setting/defining the positions for closed / open / halfway) I need to set Parameter 29 to value 1.

    Now I’m wondering how to do that. Do I have to use Blockly (create a scene, activate the scene) or can I send simple commands like that somehow else?

    Thanks in advance
    Carlos

    August 29, 2015 at 11:49 pm #1044

    coldbringer
    Participant

    Hey, I figured it out. In the menu on the left, I clicked on Services / Z-Wave and edited the propoerties of the roller shutter device.

    August 30, 2015 at 8:44 pm #1047
    Mika
    Mika
    Keymaster

    Great, I wrote a small how to for the rolle shutter :

    Configure the FGRM-222 in PulseStation

    Mika

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.