Make a 'fast' bocky rule

Free domotica! Forums How can I …? Synology NAS Make a 'fast' bocky rule

This topic contains 20 replies, has 5 voices, and was last updated by Avatar Arti 3 years, 6 months ago.

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • #2276
    Avatar
    Coyote
    Member

    Hi,

    I’ve done several totaly new installations of PS, and several new zwave associations (With services restarts)… And I think I haven’t got zwave problem.

    Here is the Zwave log when the sensor detect something :

    2015-12-31 11:00:10.384 Info, Node004, Received SensorBinary report: Sensor:57 State=On
    2015-12-31 11:00:10.384 Detail, Node004, Refreshed Value: old value=false, new value=true, type=bool
    2015-12-31 11:00:10.384 Detail, Node004, Changes to this value are not verified
    2015-12-31 11:00:10.384 Detail, Node004, Notification: ValueChanged
    2015-12-31 11:00:10.550 Info, Notification: Value Changed – Add DB Record for device id zwave-4 and value id 48-user-bool-1-0
    2015-12-31 11:00:10.666 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xc7539fad
    2015-12-31 11:00:11.488 Detail, Node004, Received: 0x01, 0x09, 0x00, 0x04, 0x00, 0x04, 0x03, 0x30, 0x03, 0xff, 0x39

    And as I wrote before, I can see changes on the dashboard, and with ImperiHome also.
    My only problem is with the “device event”. I can’t trigger a scene with any sensors,

    It’s like that the scene service doesn’t send the event to the core service.I have nothing about “1|HUB|scene|CHECKSCENESEVENT|” in the scene log, but also nothing in the core log.
    I only can find “1|scene|scene|CHECKSCENESPERIODIC|” in the core log.

    Moreover, when I make a blocky rule with the sensor, without using the device event, but using [ {device: FGMS /value : sensor} = “true”], on the peridic check, the rule works well…

    I was showing the same problem as ColdBringer (post before). I don’t know if this is always true from him.

    Am I alone with this problem ? You told us that you have reproduce this once…

    Thanks a lot

    JMarc

    #2283
    Mika
    Mika
    Keymaster

    I think that there is still a problem with the association.

    I dont think you should have :
    2015-12-31 11:00:10.384 Info, Node004, Received SensorBinary report: Sensor:57 State=On

    But something like “Send Event…”

    #2290
    Avatar
    Coyote
    Member

    Hi,

    Oki, but what’s your advise ? Should I wait because it’s a bug ?
    Is there something I can test ? (Is this the new scene service, or the new Zwave library ? Can I put an old version of PS to see something ?)
    I’ve already done many associations,installations and put news associtations in the new “association tab” with my Gen 5 stick… But there is no changes.

    I was used to use this “Device Event” block with this sensors before, and I’ve not changing my hardware..

    What can I do ?

    Many thanks

    JMarc

    #2297
    Mika
    Mika
    Keymaster

    Can you send me by mail a remote access to your installation so I can check by myself ?(I think you already send me that info but I already remove it )

    #2314
    Avatar
    Coyote
    Member

    Oki, I’ve sent links in your email Contact.

    Many thanks

    JMarc

    #2358
    Avatar
    Arti
    Participant

    I have exactly the same pb.
    my installation :
    Synology 412+
    USB Z-Stick Gen5
    4 fibaro sensors
    4 fibaro switchs

    Others scenes are ok.
    No Event trigger works (same issue thant Coyote)

Viewing 6 posts - 16 through 21 (of 21 total)

You must be logged in to reply to this topic.