January 9, 2017 at 3:39 pm #4046
I’m looking to choose a controller and I’d like to know if Pulse Station support the MySensor functionnality’s ?
It’s based on arduino network. There is a main gateway and many “slave” sensor communicating by RF (using the cheap Nrf24L01).
When the controller (pulseStation in this case) is fully compatible there is also a “inclusion button mode” wich let the controller discover all/new sensors https://www.mysensors.org/build/advanced_gateway
Homme assistant support already mysensor (if it help)
Thanks for answer ;o)January 11, 2017 at 12:00 am #4048
Wow, how come I hadn’t heard of this before, looks very good.
I’ve found some code I could rewrite to support it as well.
Will need to rewrite a lot though, but I’ve added it to my idea list, good idea, tx!
K.RensJanuary 11, 2017 at 2:20 am #4054
I really want to use your controller because of the logical part and the nice interface !
So I’ll start to create my network using this ;o)
thanks for the huge job doneJanuary 12, 2017 at 12:13 am #4059
Cool, tx for the feedback.
I’ll order an entire starter set from China.
Just takes a lot of time for it to be delivered.
Can you recommend me a full set to buy? Eg on aliexpress.com?
That I buy the correct / latest versions with a lot of sensors included.
K.RensJanuary 12, 2017 at 12:51 am #4060
Well I’m not an expert yet, but it’s an honor for me to help you a bit 😉
I can paste you the url list of what I ordered today…
Basicly I’ll adopt two kind of “strategy” about this sensor network :
– First based on small autonomous solar powered arduino pro mini 3,3volts, so few stuff in this list will be minded to this goal. As a e-cig smoker I have a lot of 18650 battery.
– Second is to wall plug arduino nano in ac adaptator to usb (I collected a lot of them with time like everybody)
About the sensors themself, the choice is quiet large but I’m going to design (I have a prusa 3d printer) a case with the basic component like temperature, humidity, light (analog lux), a PIR or IR capter (I have 7 cat’s so the pir will get mad :=) and probably any comming good idea.
Depending of the power source (wall or solar) I will of course adapt the number of sensor on the same board.
There is two version of the arduino pro mini one in 3,3volts an one in 5volts… That the only trap I saw 😉
That just for today :p but I already have a lot of arduino sensor (nfc, gas, etc.) Especially many relay, but I dont really want to use relay to command 220volts electric light or anything… for this I’ll use Z-wave on your store 😉 it’s more safe !January 12, 2017 at 1:04 am #4061
Oh I forgot the most important lol
I’ll try this, it’s not the “official” nrf module but they look’s good.
The real one is more likely :February 6, 2017 at 1:53 am #4137
I received my nrf module :o)
It work very well, the exchange/radio/discovery part is invisible for us !
But as expected I miss a good controller :p
I did my test on “domoticz on windows”… it work… but it’s not sexy…
Have you received yours ?
You must be logged in to reply to this topic.