Note: AEOTEC ZW112

Free domotica! › Forums › How can I …? › Synology NAS › Note: AEOTEC ZW112

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  djandib 10 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 16, 2016 at 9:47 am #3891

    djandib
    Participant

    Note for Window/Door Sensor AEOTEC ZW112:
    in the latest zwave update 1.3.13 there is a difference in the default parameter “Report Type to Send”:
    Old: “Basic Set and Sensor Binary Report”
    New: “Basic Set”
    Symptome: Open/Close Report isn`t send anymore
    Help: Wake up the sensor (>3 seconds pressing the B-Button; LED blinks yellow) and chance the parameter to “Basic Set and Sensor Binary Report” in Pulse-Station

    November 16, 2016 at 2:33 pm #3894
    Miss Laura
    Miss Laura
    Moderator

    Great, thank you for sharing!

    Have fun,
    Laura

    November 18, 2016 at 5:21 pm #3898

    djandib
    Participant

    Nevermind.
    But finally I changed back to the doorwindow.xml and changed in the manufacturer_specific.xml:
    <Product type=”0002″ id=”0070″ name=”ZW112 Door Window Sensor 6″ config=”aeotec/doorwindow.xml” />

    The status was not reported correctly 🙁
    Now it works again 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.