[Support request] PS 1.3.1 doesn't start

Free domotica! Forums Report a bug PS 1.3.1 doesn't start

This topic contains 7 replies, has 6 voices, and was last updated by  kikostantini 1 year, 3 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #3107

    LoJaume
    Participant

    Hi,

    After some days working good with 1.3.0 version, I’ve updated to 1.3.1 version. Now, PS doesn’t start.

    I would try to delete and install again, but I don’t want to loose zwave configuration. Any ideas?

    My NAS is DS215j

    #3108

    K.Rens
    Keymaster

    Inside Synology package center it will always appear as not starting.
    That’s a known issue.

    If inside PulseStation the core has a red cross, then it’s more an issue.
    If you cannot start it: can you try starting the core from ssh?
    Instructions are in the faq.

    Check which error messages you get while the core is starting.

    Kind regards,
    K.Rens

    #3110

    leroymth
    Participant

    Hi,
    What you can do too is on a SSH Terminal, execute
    ps -eaf | grep core | grep -v grep
    => you will be able to verify that all processes are up & running.
    Regards.

    #3115

    LoJaume
    Participant

    Yes, it’s running, ok.
    But, …i’ve lost all zwave devices, and blocky rules.
    I must include all devices again???
    Is there any way to restore configuration?

    :o/

    #3117
    Mika
    Mika
    Keymaster

    If you did a backup via the backup service, you can copy past your data from /web/PulseStationBackup to /web/PulseStation

    You dont have to copy the “services” directory since you moved to dsm6

    #3119

    dnr1213
    Participant

    Hello, I try also to install 1.31 on my Synology NAS but I can not start the application. Is there anything that I do wrong?
    Dag

    #3123
    Mika
    Mika
    Keymaster

    Can you check via http://ipsyno/PulseStation to start the core service ?

    It looks like the package center doesnt respond correctly in DSM6 ( I have to review it)

    #3131

    kikostantini
    Participant

    Bonjour,
    J’ai le même problème et j’ai pas forcement bien compris si il y avait une solution …
    (DSM 6 et PS 1.3.1). Le paquet est arête et impossible de le redémarrer …
    Pourtant je peux aller sur PS
    (J’ai remarqué l’arrêt car j’ai plusieurs scènes qui ne fonctionnent pas/plus …
    Je n’arrive plus a obtenir de résultat du service Yahoo non plus … etc …)
    Merci d’avance,

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.