July 16, 2016 at 7:37 pm #3608raulixParticipant
07/16/16-18:50:38 Installation started
07/16/16-18:50:38 PulseStation’s web interface installed.
07/16/16-18:50:38 DSM Major version : 6.
07/16/16-18:50:38 DSM6 -> Default PulseStation’s services installed.
07/16/16-18:50:38 Configuration done.
07/16/16-18:50:39 Shortcut created.
07/16/16-18:50:39 Script to restart application after reboot done.
07/16/16-18:50:39 No drivers for this DSM version – 6.0-7393. You’ll not be able
to use the Zwave/EnOcean functionnalities. Please contact the Pulse Station teamJuly 17, 2016 at 8:19 pm #3609ezwepParticipant
I have the same problemJuly 17, 2016 at 10:59 pm #3611Miss LauraModerator
I’ve just published a new version of the same package.
Not certain Synology will cache it or not, but make certain you do a refresh in the package center first.
It’s the first time I create new packages myself, so please bare with me 🙂
If it doesn’t work, I’ll tell you how to buypass it.
It’s just Synology launching new updates, nothing has changed for PulseStation.
LauraJuly 19, 2016 at 10:02 am #3614macgreg0rParticipant
I had this issue too, I’ve solded it by installing jumbotroll USB serial drivers from this repo:
the problem is that after that ttyUSB is read-only, and after each reboot I have to set it 777 manualy.
I do not see package update option on my DSM.
Have I to reinstall PulseStation?July 26, 2016 at 10:53 pm #3643Miss LauraModerator
There should be no need to install third party packages.
Everything is included in our package.
With the original PulseStation package, the access rights on the usb key remain ok for me.
You could try putting the chmod command inside either of following files:
Then it should get executed when either the NAS starts or when PulseStation starts.
LauraAugust 23, 2016 at 11:05 pm #3689madman32Participant
I’m having the same problem as the original poster.
Trying to install PulseStation 1.3.1 on a DS213j (DSM 6.0.2).
Log message is as follows:
08/23/16-21:23:52 Installation started
08/23/16-21:23:54 PulseStation’s web interface installed.
08/23/16-21:23:54 DSM Major version : 6.
08/23/16-21:23:55 DSM6 -> Default PulseStation’s services installed.
08/23/16-21:23:56 Configuration done.
08/23/16-21:23:56 Shortcut created.
08/23/16-21:23:57 Script to restart application after reboot done.
08/23/16-21:23:57 No drivers for this DSM version – 6.0-8451. You’ll not be able to use the Zwave/EnOcean functionnalities. Please contact the Pulse Station tea
Can you please advise.August 24, 2016 at 10:44 am #3690macgreg0rParticipant
It seems that you have updated to the latest DSM version.
I saw that modules are store in <your_volume>/@appstore/PulseStation/modules.
in this directory there are links to each DSM version modules, and I think for USB/cp210 too.
Maybe you can try to add a link:
sudo ln -s DSM_6.0-7274 DSM_6.0-8451
maybe you’ll have to replace “DSM_6.0-7274” by the latest true directory(no a link) availavble on your system.
- You must be logged in to reply to this topic.