RF433 adapter (Somfy RTS, X10, Chacon)

Free domotica! › Forums › Feature requests › RF433 adapter (Somfy RTS, X10, Chacon)

Tagged: 

This topic contains 7 replies, has 6 voices, and was last updated by  Deennoo 2 years, 8 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 23, 2015 at 9:55 am #1018

    Lionheart
    Participant

    Hi,

    My house is using Somfy RTS motorized blinds.
    In addition, I have some X10 modules and some DiO Chacon modules as well.
    It would be very nice to support the RFXtrx433E USB adapter so that I can use PulseStation to control all these modules throw my Synology NAS.

    Best Regards.

    August 23, 2015 at 5:02 pm #1021
    Mika
    Mika
    Keymaster

    It’s in my todo listbut i have some other thinks before that!
    But it will be support in a near future 😉

    Mikael

    January 24, 2016 at 8:48 pm #2539

    bestiol
    Participant

    Bonjour,
    Serait-il possible de savoir ou vous en êtes?
    Merci

    January 31, 2016 at 1:08 am #2573

    K.Rens
    Keymaster

    RFXcom usb key communication: working.
    Mika started working on adding the first devices 🙂

    Kind regards,
    K.Rens

    February 1, 2016 at 10:37 am #2599
    Mika
    Mika
    Keymaster

    J’ai eu un peu moins de temps ces derniers temps mais je vais m’y remettre.
    Ma librairie fonctionne maintenant je dois tout mettre en musique pour que tout fonctionne dans PulseStation.
    Ensuite, je devrais être en mesure d’ajouter les périphériques…

    April 5, 2016 at 10:08 am #3138

    mgiammarco
    Participant

    Is the rf433 protocol compatible with products like this?

    ebay wireless solar siren

    If yes I am very interested in support.
    Please note that most USA new home automation systems support only z-wave and so supporting rf433 is a big plus because only your product will have it.
    I vote for it I need it for june! 🙂

    April 19, 2016 at 9:08 pm #3235
    Mika
    Mika
    Keymaster

    Sorry for the moment I focus my time on DSM6. I’ll continue on RFXCom ASAP.

    May 8, 2016 at 5:16 pm #3359

    Deennoo
    Participant

    Adding RFLink can be good to !

    http://www.nemcon.nl/blog2/

    A open source project, with much more Hardware supported !

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.