Sending Z-Wave Commands manually

Free domotica! › Forums › Protocol-specific › Z-Wave (plus) › Sending Z-Wave Commands manually

This topic contains 1 reply, has 2 voices, and was last updated by  K.Rens 2 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 20, 2016 at 6:05 pm #2478

    coldbringer
    Participant

    Hi,

    I have bought a Zipato Mini Keypad in order to tell the PulseStation system whether we’re home.

    Obviously, the whole configuration (incl. wake-up commands) can only be performed via z-wave command and not by pushing buttons.

    Example from the manual:
    CONFIGURATION_SET
    PARAMETER: 0x05
    SIZE: 0x01
    VALUE: 0x03

    How can I interact with the device?

    Thanks for your help
    Carlos

    January 20, 2016 at 6:22 pm #2479

    K.Rens
    Keymaster

    Hi Carlos,

    We have added support for this device this week only.
    We are currently testing it and should have basic support for it in the next release.

    If you don’t want to wait, you have my details, feel free to reach out and then I can share the fix file with you. 😉

    Kind regards,
    K.Rens

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.