[Resolved] Simple Scene with Blockly

Free domotica! Forums Report a bug Simple Scene with Blockly

This topic contains 5 replies, has 3 voices, and was last updated by Mika Mika 1 year, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2528

    cartman
    Participant

    Hello,

    Is someone could tell me where i’m wrong ?

    My setup :
    DSM Pulse Station Package 1.3.0
    PulseStation URL : http://192.168.0.113/PulseStation
    Service core port : 4020

    If i run this url, the ZWAVE switch (number 4) turns ON
    http://192.168.0.113:4020/message=1|scene|zwave|UPDATEPROPERTY|zwave-4|37-user-bool-3-0|true

    If i make a scene with one button panel to turn ON the switch it does nothing.

    This is how i setup my scene under Blockly (with several ZWAVE Switch):
    Blockly

    My dashboard :
    Dash1

    Dash2

    • This topic was modified 1 year, 8 months ago by  cartman.
    • This topic was modified 1 year, 8 months ago by  cartman.
    • This topic was modified 1 year, 8 months ago by  cartman.
    #2576

    K.Rens
    Keymaster

    What is precisely the problem?

    The button does not run the scene?
    In that case, delete your manually added panel and use the generate panels button.
    It will create the correct panel for running your scene. 🙂

    Kind regards,
    K.Rens

    #2604
    Mika
    Mika
    Keymaster

    Did you use the generate panels functionnality to generate your panel ?
    If not, try it. Because the panel should be configured to trigger the correct message…

    #2699

    cartman
    Participant

    Hello !

    I deleted my manual button.
    I ran Generate Pannel button but i don’t see my scenes.

    #2700

    cartman
    Participant

    Well i just made some tests and now i can see the buttons !?
    Is there a delay when you click on Generate Panel ??

    I will try to do some test but my test scene is working now. I will come back with some news.

    #2726
    Mika
    Mika
    Keymaster

    Normally the generate panel is immediate.
    But if it work now, it’s good 😉

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.