Unable to add devices ZStick/Fibaro roller shutter

Free domotica! Forums Report a bug Unable to add devices ZStick/Fibaro roller shutter

This topic contains 5 replies, has 4 voices, and was last updated by  bastien 1 year, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2145

    bastien
    Participant

    Hello,

    My installation is based on a Sinology with an aeotec z-stick gen 5. I try to use figaro roller shutter Fibaro FGRM-222.

    I first installed 2 roller shutter and was able to add these two devices to the z-wave network, only by 3 click on B button, with the z-stick, connected to Syno, but very close to the devices. Not a good solution to move the syno to add other devices.

    I had troubles (I am learning how to use …) so I decided to reset the controller through pulse station.
    To be sure, I also reset it on the key. Now I want to rebuild the network. I tried to reset the fiber’s by holding the B button 14 seconds (I doubt it is a factory reset because my device is still in two stable toggle button mode …)

    Now, I don’t manage to add any device to the network, neither using pulse station, or by pressing the button on the stick. I tried to remove it before adding again, without any success.
    I also tried to erase files zwcf*.xml and zwave.json …

    Using the stick would be a better solution, but any other would match ….

    Thanks for any help

    You can find the log. Reading it, it seams working, but I have no device on the list …
    2015-12-19 18:12:38.741 Always, OpenZwave Version 1.3.0 Starting Up
    2015-12-19 18:12:38.742 Info, Setting Up Provided Network Key for Secure Communications
    2015-12-19 18:12:38.742 Warning, Failed – Network Key Not Set
    2015-12-19 18:12:38.743 Info, mgr, Added driver for controller /dev/ttyACM1
    2015-12-19 18:12:38.743 Info, Opening controller /dev/ttyACM1
    2015-12-19 18:12:38.743 Info, Trying to open serial port /dev/ttyACM1 (attempt 1)
    2015-12-19 18:12:38.749 Info, Serial port /dev/ttyACM1 opened (attempt 1)
    2015-12-19 18:12:38.749 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-19 18:12:38.749 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-19 18:12:38.750 Detail,
    2015-12-19 18:12:38.750 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-19 18:12:38.753 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
    2015-12-19 18:12:38.753 Detail,
    2015-12-19 18:12:38.753 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
    2015-12-19 18:12:38.753 Info, contrlr, Static Controller library, version Z-Wave 3.95
    2015-12-19 18:12:38.754 Detail, Node045, Expected reply was received
    2015-12-19 18:12:38.754 Detail, Node045, Message transaction complete
    2015-12-19 18:12:38.754 Detail,
    2015-12-19 18:12:38.754 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.754 Detail,
    2015-12-19 18:12:38.754 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-19 18:12:38.757 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0xe6, 0xf8, 0xb1, 0x65, 0x01, 0x1d
    2015-12-19 18:12:38.757 Detail,
    2015-12-19 18:12:38.757 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0xe6f8b165. Our node ID = 1
    2015-12-19 18:12:38.757 Detail, Node248, Expected reply was received
    2015-12-19 18:12:38.757 Detail, Node248, Message transaction complete
    2015-12-19 18:12:38.757 Detail,
    2015-12-19 18:12:38.758 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.758 Detail,
    2015-12-19 18:12:38.758 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-19 18:12:38.760 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
    2015-12-19 18:12:38.760 Detail,
    2015-12-19 18:12:38.760 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
    2015-12-19 18:12:38.760 Info, contrlr, There is no SUC ID Server (SIS) in this network.
    2015-12-19 18:12:38.760 Info, contrlr, The PC controller is a primary controller.
    2015-12-19 18:12:38.760 Detail, Node215, Expected reply was received
    2015-12-19 18:12:38.760 Detail, Node215, Message transaction complete
    2015-12-19 18:12:38.760 Detail,
    2015-12-19 18:12:38.760 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.760 Detail,
    2015-12-19 18:12:38.760 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-19 18:12:38.765 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
    2015-12-19 18:12:38.765 Detail,
    2015-12-19 18:12:38.765 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
    2015-12-19 18:12:38.765 Info, contrlr, Serial API Version: 1.0
    2015-12-19 18:12:38.765 Info, contrlr, Manufacturer ID: 0x0086
    2015-12-19 18:12:38.765 Info, contrlr, Product Type: 0x0001
    2015-12-19 18:12:38.765 Info, contrlr, Product ID: 0x005a
    2015-12-19 18:12:38.765 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-19 18:12:38.766 Detail, Expected reply was received
    2015-12-19 18:12:38.766 Detail, Message transaction complete
    2015-12-19 18:12:38.766 Detail,
    2015-12-19 18:12:38.766 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.766 Detail,
    2015-12-19 18:12:38.766 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-19 18:12:38.768 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
    2015-12-19 18:12:38.768 Detail,
    2015-12-19 18:12:38.768 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
    2015-12-19 18:12:38.768 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
    2015-12-19 18:12:38.768 Detail, Node172, Expected reply was received
    2015-12-19 18:12:38.768 Detail, Node172, Message transaction complete
    2015-12-19 18:12:38.768 Detail,
    2015-12-19 18:12:38.768 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.769 Detail,
    2015-12-19 18:12:38.769 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-19 18:12:38.825 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0x53, 0xb4, 0x76, 0x8d, 0x68, 0xd4, 0x1a, 0x31, 0x41, 0x6b, 0x01, 0xb2, 0x58, 0x07, 0xd8, 0xb3, 0xe8, 0x33, 0x5f, 0x2f, 0x3f, 0xf4, 0x3c, 0x6b, 0x1f, 0xde, 0xa6, 0xf2, 0x9b, 0xde, 0xcc, 0x75, 0x9e
    2015-12-19 18:12:38.825 Detail,
    2015-12-19 18:12:38.825 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
    2015-12-19 18:12:38.825 Detail, Node032, Expected reply was received
    2015-12-19 18:12:38.825 Detail, Node032, Message transaction complete
    2015-12-19 18:12:38.825 Detail,
    2015-12-19 18:12:38.825 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.826 Detail,
    2015-12-19 18:12:38.826 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-19 18:12:38.927 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
    2015-12-19 18:12:38.927 Detail,
    2015-12-19 18:12:38.927 Info, mgr, Driver with Home ID of 0xe6f8b165 is now ready.
    2015-12-19 18:12:38.927 Info,
    2015-12-19 18:12:38.928 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
    2015-12-19 18:12:38.928 Info, contrlr, Node 001 – Known
    2015-12-19 18:12:38.928 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
    2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Probe1
    2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Associations
    2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Neighbors
    2015-12-19 18:12:38.929 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
    2015-12-19 18:12:38.929 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-19 18:12:38.929 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
    2015-12-19 18:12:38.929 Detail, Expected reply was received
    2015-12-19 18:12:38.929 Detail, Message transaction complete
    2015-12-19 18:12:38.929 Detail,
    2015-12-19 18:12:38.929 Detail, contrlr, Removing current message
    2015-12-19 18:12:38.929 Detail, Node001, Notification: DriverReady
    2015-12-19 18:12:38.931 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:39.157 Detail, Node001, Notification: NodeAdded
    2015-12-19 18:12:39.158 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:39.447 Detail, Node001, Notification: NodeProtocolInfo
    2015-12-19 18:12:39.448 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:39.670 Detail, Node001, Notification: EssentialNodeQueriesComplete
    2015-12-19 18:12:39.671 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:39.959 Detail, Node001, Notification: ValueAdded
    2015-12-19 18:12:39.961 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:40.270 Detail, Node001, Notification: NodeNaming
    2015-12-19 18:12:40.271 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-19 18:12:40.580 Detail,
    2015-12-19 18:12:40.580 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-19 18:12:40.583 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x96, 0x0f, 0x64
    2015-12-19 18:12:40.583 Detail,
    2015-12-19 18:12:40.583 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
    2015-12-19 18:12:40.583 Detail, Node015, Expected reply was received
    2015-12-19 18:12:40.583 Detail, Node015, Message transaction complete
    2015-12-19 18:12:40.583 Detail,
    2015-12-19 18:12:40.583 Detail, contrlr, Removing current message
    2015-12-19 18:12:40.584 Detail,
    2015-12-19 18:12:40.584 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-19 18:12:40.586 Detail, contrlr, Removing current message
    2015-12-19 18:12:40.586 Detail,
    2015-12-19 18:12:40.586 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-19 18:12:40.591 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
    2015-12-19 18:12:40.591 Detail,
    2015-12-19 18:12:40.591 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
    2015-12-19 18:12:40.591 Info, Node001, Neighbors of this node are:
    2015-12-19 18:12:40.591 Info, Node001, (none reported)
    2015-12-19 18:12:40.591 Detail, Expected reply was received
    2015-12-19 18:12:40.591 Detail, Message transaction complete
    2015-12-19 18:12:40.591 Detail,
    2015-12-19 18:12:40.591 Detail, Node001, Removing current message
    2015-12-19 18:12:40.592 Detail, Node001, Query Stage Complete (Neighbors)
    2015-12-19 18:12:40.592 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
    2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Session
    2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Dynamic
    2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Configuration
    2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Complete
    2015-12-19 18:12:40.592 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
    2015-12-19 18:12:40.592 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
    2015-12-19 18:12:40.592 Info, Node query processing complete.
    2015-12-19 18:12:40.592 Detail, Node001, Notification: NodeQueriesComplete
    2015-12-19 18:12:40.594 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165

    #2146

    K.Rens
    Keymaster

    Hi

    Normally before christmas we will release a new version that has a new zwave library and a lot of new features, like associations.
    This will for instance allow you to control all devices at the same time with a single button press.

    To come back to your problem:
    If you zwave stick reaches far enough to control the devices, there is no need to move your entire synology.
    There are always 2 ways to include your devices:
    1) by using the button on your usb key
    2) using the controller commands inside PulseStation.

    To reset your 222:
    1) Make sure the module is connected to the power supply.
    2) Press and hold the B-button for ca. 14 seconds.
    3) LED indicator will glow yellow.
    4) Release the B-button and press it again, briefly.
    5) The Roller Shutter memory is now empty.
    6) The module goes into the auto inclusion mode, until any button
    is pushed

    After the reset, just put the controller into ‘add device’ mode and it will look for the device.

    I do not see inside your logs that you tried to do the last step.

    Kind regards,
    K.Rens

    #2149

    bastien
    Participant

    Thank you for your answer. I got the new release today.

    As I said, I tried to hard reset my fibaro but nothing happen. It becomes blue and then green/perhaps yellow but only after 8 seconds. For me, it doesn’t works because it is still in stable toggle button mode. After that, I tried to add it in the Z-wave network.
    I don’t understand the log, Here is the log :

    2015-12-20 16:58:33.113 Always, OpenZwave Version 1.3.0 Starting Up
    2015-12-20 16:58:33.115 Info, Setting Up Provided Network Key for Secure Communications
    2015-12-20 16:58:33.115 Warning, Failed – Network Key Not Set
    2015-12-20 16:58:33.115 Info, mgr, Added driver for controller /dev/ttyACM1
    2015-12-20 16:58:33.122 Info, Opening controller /dev/ttyACM1
    2015-12-20 16:58:33.122 Info, Trying to open serial port /dev/ttyACM1 (attempt 1)
    2015-12-20 16:58:33.127 Info, Serial port /dev/ttyACM1 opened (attempt 1)
    2015-12-20 16:58:33.127 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-20 16:58:33.129 Detail,
    2015-12-20 16:58:33.129 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-20 16:58:33.133 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
    2015-12-20 16:58:33.133 Detail,
    2015-12-20 16:58:33.133 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
    2015-12-20 16:58:33.133 Info, contrlr, Static Controller library, version Z-Wave 3.95
    2015-12-20 16:58:33.133 Detail, Node045, Expected reply was received
    2015-12-20 16:58:33.133 Detail, Node045, Message transaction complete
    2015-12-20 16:58:33.134 Detail,
    2015-12-20 16:58:33.134 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.134 Detail,
    2015-12-20 16:58:33.134 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-20 16:58:33.137 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0xe6, 0xf8, 0xb1, 0x65, 0x01, 0x1d
    2015-12-20 16:58:33.137 Detail,
    2015-12-20 16:58:33.138 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0xe6f8b165. Our node ID = 1
    2015-12-20 16:58:33.138 Detail, Node248, Expected reply was received
    2015-12-20 16:58:33.138 Detail, Node248, Message transaction complete
    2015-12-20 16:58:33.138 Detail,
    2015-12-20 16:58:33.138 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.138 Detail,
    2015-12-20 16:58:33.138 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-20 16:58:33.141 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
    2015-12-20 16:58:33.141 Detail,
    2015-12-20 16:58:33.141 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
    2015-12-20 16:58:33.142 Info, contrlr, There is no SUC ID Server (SIS) in this network.
    2015-12-20 16:58:33.142 Info, contrlr, The PC controller is a primary controller.
    2015-12-20 16:58:33.142 Detail, Node215, Expected reply was received
    2015-12-20 16:58:33.142 Detail, Node215, Message transaction complete
    2015-12-20 16:58:33.142 Detail,
    2015-12-20 16:58:33.142 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.142 Detail,
    2015-12-20 16:58:33.143 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-20 16:58:33.147 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
    2015-12-20 16:58:33.147 Detail,
    2015-12-20 16:58:33.148 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
    2015-12-20 16:58:33.148 Info, contrlr, Serial API Version: 1.0
    2015-12-20 16:58:33.148 Info, contrlr, Manufacturer ID: 0x0086
    2015-12-20 16:58:33.148 Info, contrlr, Product Type: 0x0001
    2015-12-20 16:58:33.148 Info, contrlr, Product ID: 0x005a
    2015-12-20 16:58:33.148 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-20 16:58:33.148 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-20 16:58:33.149 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-20 16:58:33.149 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-20 16:58:33.149 Detail, Expected reply was received
    2015-12-20 16:58:33.150 Detail, Message transaction complete
    2015-12-20 16:58:33.150 Detail,
    2015-12-20 16:58:33.150 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.150 Detail,
    2015-12-20 16:58:33.150 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-20 16:58:33.152 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
    2015-12-20 16:58:33.152 Detail,
    2015-12-20 16:58:33.152 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
    2015-12-20 16:58:33.153 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
    2015-12-20 16:58:33.153 Detail, Node172, Expected reply was received
    2015-12-20 16:58:33.153 Detail, Node172, Message transaction complete
    2015-12-20 16:58:33.153 Detail,
    2015-12-20 16:58:33.153 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.153 Detail,
    2015-12-20 16:58:33.153 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-20 16:58:33.209 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0x98, 0x58, 0x9b, 0x57, 0xad, 0xc6, 0x07, 0x72, 0x0d, 0xf5, 0xea, 0x31, 0xf1, 0x10, 0xb1, 0x1e, 0xf5, 0xad, 0x57, 0xa5, 0x6d, 0x3c, 0xd5, 0x37, 0xad, 0xb8, 0x83, 0xdf, 0xb6, 0xb1, 0xfe, 0x53, 0x63
    2015-12-20 16:58:33.210 Detail,
    2015-12-20 16:58:33.210 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
    2015-12-20 16:58:33.210 Detail, Node032, Expected reply was received
    2015-12-20 16:58:33.210 Detail, Node032, Message transaction complete
    2015-12-20 16:58:33.210 Detail,
    2015-12-20 16:58:33.210 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.211 Detail,
    2015-12-20 16:58:33.211 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-20 16:58:33.312 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
    2015-12-20 16:58:33.312 Detail,
    2015-12-20 16:58:33.312 Info, mgr, Driver with Home ID of 0xe6f8b165 is now ready.
    2015-12-20 16:58:33.312 Info,
    2015-12-20 16:58:33.313 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
    2015-12-20 16:58:33.313 Info, contrlr, Node 001 – Known
    2015-12-20 16:58:33.313 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
    2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Probe1
    2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Associations
    2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Neighbors
    2015-12-20 16:58:33.314 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
    2015-12-20 16:58:33.314 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-20 16:58:33.314 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
    2015-12-20 16:58:33.314 Detail, Expected reply was received
    2015-12-20 16:58:33.314 Detail, Message transaction complete
    2015-12-20 16:58:33.314 Detail,
    2015-12-20 16:58:33.314 Detail, contrlr, Removing current message
    2015-12-20 16:58:33.314 Detail, Node001, Notification: DriverReady
    2015-12-20 16:58:33.349 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:33.573 Detail, Node001, Notification: NodeAdded
    2015-12-20 16:58:33.574 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:33.797 Detail, Node001, Notification: NodeProtocolInfo
    2015-12-20 16:58:33.798 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:34.117 Detail, Node001, Notification: EssentialNodeQueriesComplete
    2015-12-20 16:58:34.118 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:34.433 Detail, Node001, Notification: ValueAdded
    2015-12-20 16:58:34.434 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:34.749 Detail, Node001, Notification: NodeNaming
    2015-12-20 16:58:34.750 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:34.972 Detail,
    2015-12-20 16:58:34.972 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-20 16:58:34.974 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x64, 0x0f, 0x96
    2015-12-20 16:58:34.974 Detail,
    2015-12-20 16:58:34.974 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
    2015-12-20 16:58:34.974 Detail, Node015, Expected reply was received
    2015-12-20 16:58:34.974 Detail, Node015, Message transaction complete
    2015-12-20 16:58:34.974 Detail,
    2015-12-20 16:58:34.974 Detail, contrlr, Removing current message
    2015-12-20 16:58:34.974 Detail,
    2015-12-20 16:58:34.974 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-20 16:58:34.976 Detail, contrlr, Removing current message
    2015-12-20 16:58:34.976 Detail,
    2015-12-20 16:58:34.976 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-20 16:58:34.981 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
    2015-12-20 16:58:34.981 Detail,
    2015-12-20 16:58:34.981 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
    2015-12-20 16:58:34.981 Info, Node001, Neighbors of this node are:
    2015-12-20 16:58:34.981 Info, Node001, (none reported)
    2015-12-20 16:58:34.981 Detail, Expected reply was received
    2015-12-20 16:58:34.981 Detail, Message transaction complete
    2015-12-20 16:58:34.981 Detail,
    2015-12-20 16:58:34.981 Detail, Node001, Removing current message
    2015-12-20 16:58:34.981 Detail, Node001, Query Stage Complete (Neighbors)
    2015-12-20 16:58:34.982 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
    2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Session
    2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Dynamic
    2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Configuration
    2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Complete
    2015-12-20 16:58:34.982 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
    2015-12-20 16:58:34.982 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
    2015-12-20 16:58:34.982 Info, Node query processing complete.
    2015-12-20 16:58:34.982 Detail, Node001, Notification: NodeQueriesComplete
    2015-12-20 16:58:34.983 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 16:58:35.209 Detail, contrlr, Notification: AllNodesQueried
    2015-12-20 16:58:35.210 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:06:52.308 Detail, contrlr, Queuing (Controller) Add Device
    2015-12-20 17:06:52.309 Info, Add Device
    2015-12-20 17:06:52.309 Detail, contrlr, Queuing (Command) ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
    2015-12-20 17:06:52.309 Detail, Notification: ControllerComand – Starting
    2015-12-20 17:06:52.310 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:06:52.620 Detail,
    2015-12-20 17:06:52.620 Info, contrlr, Sending (Command) message (Callback ID=0x0a, Expected Reply=0x4a) – ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
    2015-12-20 17:06:52.624 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x01, 0x00, 0x00, 0xb9
    2015-12-20 17:06:52.624 Detail,
    2015-12-20 17:06:52.624 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-20 17:06:52.624 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
    2015-12-20 17:06:52.624 Detail, Node001, Expected callbackId was received
    2015-12-20 17:06:52.624 Detail, Node001, Expected reply was received
    2015-12-20 17:06:52.624 Detail, Node001, Message transaction complete
    2015-12-20 17:06:52.624 Detail,
    2015-12-20 17:06:52.625 Detail, contrlr, Removing current message
    2015-12-20 17:06:52.625 Detail, Notification: ControllerCommand – Waiting
    2015-12-20 17:06:52.626 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:06:53.110 Info, WriteNextMsg Controller nothing to do
    2015-12-20 17:08:32.665 Info, Cancel Add Node
    2015-12-20 17:08:32.665 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-20 17:08:32.665 Detail,
    2015-12-20 17:08:32.665 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-20 17:08:32.665 Detail, Notification: ControllerCommand – Canceled
    2015-12-20 17:08:32.666 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:08:32.710 Info, Cancel Add Node
    2015-12-20 17:08:32.711 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-20 17:08:32.953 Detail, Notification: ControllerCommand – Canceled
    2015-12-20 17:08:32.954 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:08:33.171 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
    2015-12-20 17:08:33.171 Detail,
    2015-12-20 17:08:33.171 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-20 17:08:33.171 Info, contrlr, ADD_NODE_STATUS_DONE
    2015-12-20 17:08:33.171 Detail, Node006, Expected reply was received
    2015-12-20 17:08:33.171 Detail, Node006, Message transaction complete
    2015-12-20 17:08:33.171 Detail,
    2015-12-20 17:08:33.171 Detail, contrlr, Removing current message
    2015-12-20 17:08:33.172 Detail, Notification: ControllerCommand – Completed
    2015-12-20 17:08:33.173 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
    2015-12-20 17:08:33.390 Detail,
    2015-12-20 17:08:33.390 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-20 17:08:33.442 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
    2015-12-20 17:08:33.442 Detail,
    2015-12-20 17:08:33.442 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-20 17:08:33.442 Info, contrlr, ADD_NODE_STATUS_DONE
    2015-12-20 17:08:33.442 Detail, Node006, Expected reply was received
    2015-12-20 17:08:33.442 Detail, Node006, Message transaction complete
    2015-12-20 17:08:33.442 Detail,
    2015-12-20 17:08:33.442 Detail, contrlr, Removing current message
    2015-12-20 17:08:33.442 Detail, Notification: ControllerCommand – Completed
    2015-12-20 17:08:33.444 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165

    #2157
    Mika
    Mika
    Keymaster

    Hi,

    First, all the log you see come from the OpenZwave library…When the library starts, there are a lot of procedures that build your network correctly.

    If you use the Aeon Labs Dongle, I recommend you to associate it directly via the USB Stick (I have the old one (ZStick V2)).

    When you want to include a device into your network, it’s recommended to do the exclusion procedure first and then associate.

    For your FRGM222 ( I have 4 devices like that), I only configure 2 properties :
    *Switch Type
    *Forced Roller Shutter Calibration

    For the reset procedure of your device, just do the procedure describe in the documentation of the device. The OpenZwave library is OpenSource and can contains some bugs.

    So maybe try again that steps :
    * Reset the controller via PulseStation (or another tool if you want)
    * Reset your FGRM222
    * Remove the file /web/PulseStation/zwave.json and zwcfg*.xml
    * Exclude your devices from your Aeon dongle (just to be sure)
    * Include your devices
    * Plug the dongle (verify the serial port associated)
    * Start the zwave service
    * Wait a few minutes that the OpenZwave library is correctly started

    Once you are there, you can eventually send me by mail the remote access to your PulseStation.
    So I can take a look if everything sounds good!

    Best Regards,
    Mika

    #2166

    coldbringer
    Participant

    Hey Bastien,

    I have the same equipment so here is my 2 cents.

    I didnt work at first, but after a couple of tries I found that the roller shutter reset works exactly as described in the instructions. The yellow is not a yellow really, looks pretty greenish. I think it is the third or fourth color that appears.

    The Z-Stick has a built-in battery. So you can remove it from the USB port of your DiskStation and take it to the device you need to include/exclude. Hold the button and the LED will start flashing slowly (blue color) ==> then it’s in inclusion mode.

    Although at first I was sure that I had no range-related problems, installing an Aeon Labs range extender really solved many weird problems that I had. Depending on the positioning of the antennas of the Fibaro switches the range can obviously be drastically reduced. In my case, this led to roller shutters that would sometimes work perfectly and sometimes do nothing at all…

    Good luck
    Carlos

    #2175

    bastien
    Participant

    Hi and thank you all for your help,

    By reading your post and looking everywhere, I solved my problem :

    – Ok, the yellow for the fibaro roller shutter is quit green
    – I think the reset is only effective after module exclusion
    – I manage to add module using the stick’s button, but I had to click 4 or 5 times on the B-button and not only 3 as described in the manual. To be sure, S1 and S2 were deconnected (I read that S1 might be deconnected . S2 was because I was desperate 😀 :D)

    Bastien

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.