Arti

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Zwave security and network key #12313
    Avatar
    Arti
    Participant

    Hi,

    I use a Z-Stick Gen5 USB controller on my syno, and i use PulseStation since 2014.

    I was thinking my Z-wave plus components (about 20) were secured, but it seems that’s not the case.
    Today Iihave issues with a danalock zwave item, and after many tries, i didn’t achieve in add it a secured way. So i can’t use the lock with z-wave scenes…

    The log says

    2019-08-28 14:25:17.506 Always, OpenZwave Version 1.3.0 Starting Up
    2019-08-28 14:25:17.507 Info, Setting Up Provided Network Key for Secure Communications
    2019-08-28 14:25:17.507 Info, mgr, Added driver for controller /dev/ttyACM0
    2019-08-28 14:25:17.507 Info, Opening controller /dev/ttyACM0
    2019-08-28 14:25:17.507 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
    2019-08-28 14:25:17.511 Info, Serial port /dev/ttyACM0 opened (attempt 1)

    2019-08-28 14:56:19.884 Detail,
    2019-08-28 14:56:19.884 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2019-08-28 14:56:19.884 Info, ADD_NODE_STATUS_ADDING_SLAVE
    2019-08-28 14:56:19.884 Info, Adding node ID 35 – Non-Secure

    How can i make it works ?

    Thanks

    (excuse me for my bad English, i’m French)

    in reply to: Make a 'fast' bocky rule #2358
    Avatar
    Arti
    Participant

    I have exactly the same pb.
    my installation :
    Synology 412+
    USB Z-Stick Gen5
    4 fibaro sensors
    4 fibaro switchs

    Others scenes are ok.
    No Event trigger works (same issue thant Coyote)

    in reply to: Blockly: Display Error #2310
    Avatar
    Arti
    Participant

    I found it, it was me : i didnt’ see the faq :
    https://www.pulse-station.com/fr/faqs/my-saved-scene-looks-empty-or-looks-weird/

    it resolved my problem

    (but it take me a bit time to go to this section in my syno… it would be great to import/export scenes as xml files directly into pulsestation…)

    in reply to: Blockly: Display Error #2306
    Avatar
    Arti
    Participant

    sorry i didn’t post the entire screenshot
    it can be foud here :
    Screenshot

    • This reply was modified 3 years, 11 months ago by Avatar Arti.
    • This reply was modified 3 years, 11 months ago by Avatar Arti.
    in reply to: Blockly: Display Error #2305
    Avatar
    Arti
    Participant

    I have an issue with blockly :
    My scene run correctly, but i cannot edit the scene anymore withe blockly. It looks “collapse” like if all object where lying on the same place…

    Screenshot

    in reply to: Ecodevice #2294
    Avatar
    Arti
    Participant

    Pour préciser un peu ma demande…. J’ai bien réussi à faire 8 devices virtuels qui me remontent bien les informations (compteurs, couleur journée, etc.) mais si j’ai bien compris, les devices virtuels ne sont pas historisés par défaut dans la base de données…
    Or c’est bien ce que je souhaiterai faire. Comment demander l’historisation des relevés de compteur, si possible à des intervalles qui ne sont pas identiques. (par exemple la “couleur” de la journée d’un point de vue tarif ne doit être prise qu’une fois par jour, alors que la consommation électrique cumulée peut être intéressante toute les 15mn afin d’avoir un suivi fin…)

    in reply to: Service Database ne crée pas les tables #2287
    Avatar
    Arti
    Participant

    J’ai trouvé : il ne faut utiliser un compte localhost et non de type “tout client” dans MySQL.

    Les enregistrements fonctionnent désormais.

Viewing 7 posts - 1 through 7 (of 7 total)