Thanks Koen for your recommendation,
however, it would be good if the sceneevent works also with fibaro motion sensor. Do you have a clue why the sceneevent is not triggered?
Meanwhile I included a fibaro window sensor 2 (inclusion without problems/associations to z-wave1 controller). Unfortunately I got also this “unhandled command class 0x60” which was already described in this thread. Do you have any advise how to handle this? I have everthing running on a raspberry pi. So, I’m not completly correct in this thread but problem seems to be independent from the plattform…
2018-09-23 15:36:14.570 Detail, Node049, Received: 0x01, 0x13, 0x00, 0x04, 0x00, 0x31, 0x0d, 0x60, 0x0d, 0x00, 0x01, 0x71, 0x05, 0x00, 0x00, 0x00, 0xff, 0x06, 0x17, 0x00, 0x22
2018-09-23 15:36:14.570 Detail,
2018-09-23 15:36:14.570 Info, Node049, ApplicationCommandHandler – Unhandled Command Class 0x60
Am I alone with these problems, someone else out there?
Thanks in advance for your quick reply!