Répondre à : Zwave security and network key

Domotica gratuit Forums Protocol-specific Z-Wave (plus) Zwave security and network key Répondre à : Zwave security and network key

#12313
Avatar
Arti
Participant

Hi,

I use a Z-Stick Gen5 USB controller on my syno, and i use PulseStation since 2014.

I was thinking my Z-wave plus components (about 20) were secured, but it seems that’s not the case.
Today Iihave issues with a danalock zwave item, and after many tries, i didn’t achieve in add it a secured way. So i can’t use the lock with z-wave scenes…

The log says

2019-08-28 14:25:17.506 Always, OpenZwave Version 1.3.0 Starting Up
2019-08-28 14:25:17.507 Info, Setting Up Provided Network Key for Secure Communications
2019-08-28 14:25:17.507 Info, mgr, Added driver for controller /dev/ttyACM0
2019-08-28 14:25:17.507 Info, Opening controller /dev/ttyACM0
2019-08-28 14:25:17.507 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2019-08-28 14:25:17.511 Info, Serial port /dev/ttyACM0 opened (attempt 1)

2019-08-28 14:56:19.884 Detail,
2019-08-28 14:56:19.884 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2019-08-28 14:56:19.884 Info, ADD_NODE_STATUS_ADDING_SLAVE
2019-08-28 14:56:19.884 Info, Adding node ID 35 – Non-Secure

How can i make it works ?

Thanks

(excuse me for my bad English, i’m French)