Aeon Labs USB Z-wave (gen5) working or not?

Domotica gratuit Forums How can I …? Synology NAS Aeon Labs USB Z-wave (gen5) working or not?

Mots-clés : , ,

Ce sujet a 11 réponses, 2 participants et a été mis à jour par  hgravatar, il y a 1 an et 8 mois.

12 sujets de 1 à 12 (sur un total de 12)
  • Auteur
    Messages
  • #2182

    hgravatar
    Participant

    Hello,

    I’m trying to install the Aeon Labs USB Z-wave (5th gen) on Pulse-Station. Should it appear on the “Service detail: zwave” page under Devices? In the log it looks like the stick gets found, but I don’t know if it’s working. And no device is shown on the page. I have a greenwave PowerNode, but it doesn’t show up either. And in the log it states:

    2015-12-23 10:07:46.342 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
    2015-12-23 10:07:46.342 Info, Node001, Neighbors of this node are:
    2015-12-23 10:07:46.342 Info, Node001, (none reported)
    2015-12-23 10:07:46.342 Detail, Expected reply was received
    2015-12-23 10:07:46.342 Detail, Message transaction complete

    The stick does blink the three colours (blue, orange, red) when hooked up to the Synology. So I think it’s working. However, no device is shown. Is this right? Can anyone help me to get it working?

    Here is the total log I have:

    2015-12-23 10:07:44.329 Always, OpenZwave Version 1.3.0 Starting Up
    2015-12-23 10:07:44.330 Info, Setting Up Provided Network Key for Secure Communications
    2015-12-23 10:07:44.330 Info, mgr, Added driver for controller /dev/ttyACM0
    2015-12-23 10:07:44.330 Info, Opening controller /dev/ttyACM0
    2015-12-23 10:07:44.331 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
    2015-12-23 10:07:44.334 Info, Serial port /dev/ttyACM0 opened (attempt 1)
    2015-12-23 10:07:44.334 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-23 10:07:44.334 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-23 10:07:44.334 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-23 10:07:44.334 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-23 10:07:44.335 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-23 10:07:44.335 Detail,
    2015-12-23 10:07:44.335 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-23 10:07:44.347 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
    2015-12-23 10:07:44.347 Detail,
    2015-12-23 10:07:44.347 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
    2015-12-23 10:07:44.347 Info, contrlr, Static Controller library, version Z-Wave 3.95
    2015-12-23 10:07:44.347 Detail, Node045, Expected reply was received
    2015-12-23 10:07:44.347 Detail, Node045, Message transaction complete
    2015-12-23 10:07:44.348 Detail,
    2015-12-23 10:07:44.348 Detail, contrlr, Removing current message
    2015-12-23 10:07:44.348 Detail,
    2015-12-23 10:07:44.348 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-23 10:07:44.350 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0x00, 0x00, 0xf6, 0xee, 0x01, 0xcf
    2015-12-23 10:07:44.350 Detail,
    2015-12-23 10:07:44.350 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0x0000f6ee. Our node ID = 1
    2015-12-23 10:07:44.350 Detail, Expected reply was received
    2015-12-23 10:07:44.350 Detail, Message transaction complete
    2015-12-23 10:07:44.350 Detail,
    2015-12-23 10:07:44.350 Detail, contrlr, Removing current message
    2015-12-23 10:07:44.350 Detail,
    2015-12-23 10:07:44.350 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-23 10:07:44.857 Warning, WARNING: 500ms passed without reading the rest of the frame…aborting frame read
    2015-12-23 10:07:45.367 Warning, WARNING: 500ms passed without reading the rest of the frame…aborting frame read
    2015-12-23 10:07:45.367 Warning, WARNING: Out of frame flow! (0xd7). Sending NAK.
    2015-12-23 10:07:45.367 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
    2015-12-23 10:07:45.368 Detail,
    2015-12-23 10:07:45.368 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
    2015-12-23 10:07:45.368 Info, contrlr, There is no SUC ID Server (SIS) in this network.
    2015-12-23 10:07:45.368 Info, contrlr, The PC controller is a primary controller.
    2015-12-23 10:07:45.368 Detail, Node215, Expected reply was received
    2015-12-23 10:07:45.368 Detail, Node215, Message transaction complete
    2015-12-23 10:07:45.368 Detail,
    2015-12-23 10:07:45.368 Detail, contrlr, Removing current message
    2015-12-23 10:07:45.368 Detail,
    2015-12-23 10:07:45.368 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-23 10:07:45.372 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
    2015-12-23 10:07:45.372 Detail,
    2015-12-23 10:07:45.372 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
    2015-12-23 10:07:45.372 Info, contrlr, Serial API Version: 1.0
    2015-12-23 10:07:45.372 Info, contrlr, Manufacturer ID: 0x0086
    2015-12-23 10:07:45.372 Info, contrlr, Product Type: 0x0001
    2015-12-23 10:07:45.372 Info, contrlr, Product ID: 0x005a
    2015-12-23 10:07:45.373 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-23 10:07:45.373 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-23 10:07:45.373 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-23 10:07:45.373 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-23 10:07:45.373 Detail, Expected reply was received
    2015-12-23 10:07:45.373 Detail, Message transaction complete
    2015-12-23 10:07:45.373 Detail,
    2015-12-23 10:07:45.373 Detail, contrlr, Removing current message
    2015-12-23 10:07:45.373 Detail,
    2015-12-23 10:07:45.373 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-23 10:07:45.375 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
    2015-12-23 10:07:45.375 Detail,
    2015-12-23 10:07:45.375 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
    2015-12-23 10:07:45.375 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
    2015-12-23 10:07:45.375 Detail, Node172, Expected reply was received
    2015-12-23 10:07:45.375 Detail, Node172, Message transaction complete
    2015-12-23 10:07:45.375 Detail,
    2015-12-23 10:07:45.375 Detail, contrlr, Removing current message
    2015-12-23 10:07:45.375 Detail,
    2015-12-23 10:07:45.375 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-23 10:07:45.431 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0xea, 0x02, 0x1c, 0xd7, 0x1a, 0xfe, 0x55, 0x9f, 0x0a, 0xd6, 0x44, 0xce, 0x09, 0xdc, 0x0e, 0x03, 0x22, 0x86, 0x6e, 0x55, 0xfa, 0x08, 0x5f, 0x47, 0x42, 0x46, 0xee, 0xb3, 0x75, 0x97, 0xae, 0x29, 0x2c
    2015-12-23 10:07:45.431 Detail,
    2015-12-23 10:07:45.431 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
    2015-12-23 10:07:45.431 Detail, Node032, Expected reply was received
    2015-12-23 10:07:45.431 Detail, Node032, Message transaction complete
    2015-12-23 10:07:45.431 Detail,
    2015-12-23 10:07:45.431 Detail, contrlr, Removing current message
    2015-12-23 10:07:45.431 Detail,
    2015-12-23 10:07:45.431 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-23 10:07:45.533 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
    2015-12-23 10:07:45.533 Detail,
    2015-12-23 10:07:45.533 Info, mgr, Driver with Home ID of 0x0000f6ee is now ready.
    2015-12-23 10:07:45.533 Info,
    2015-12-23 10:07:45.534 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
    2015-12-23 10:07:45.534 Info, contrlr, Node 001 – Known
    2015-12-23 10:07:45.534 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
    2015-12-23 10:07:45.534 Detail, Node001, QueryStage_Probe1
    2015-12-23 10:07:45.534 Detail, Node001, QueryStage_Associations
    2015-12-23 10:07:45.534 Detail, Node001, QueryStage_Neighbors
    2015-12-23 10:07:45.534 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
    2015-12-23 10:07:45.534 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-23 10:07:45.534 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
    2015-12-23 10:07:45.535 Detail, Expected reply was received
    2015-12-23 10:07:45.535 Detail, Message transaction complete
    2015-12-23 10:07:45.535 Detail,
    2015-12-23 10:07:45.535 Detail, contrlr, Removing current message
    2015-12-23 10:07:45.535 Detail, Node001, Notification: DriverReady
    2015-12-23 10:07:45.567 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:45.688 Detail, Node001, Notification: NodeAdded
    2015-12-23 10:07:45.689 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:45.811 Detail, Node001, Notification: NodeProtocolInfo
    2015-12-23 10:07:45.812 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:45.936 Detail, Node001, Notification: EssentialNodeQueriesComplete
    2015-12-23 10:07:45.937 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:46.063 Detail, Node001, Notification: ValueAdded
    2015-12-23 10:07:46.064 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:46.211 Detail, Node001, Notification: NodeNaming
    2015-12-23 10:07:46.212 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:46.334 Detail,
    2015-12-23 10:07:46.334 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-23 10:07:46.335 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x96, 0x0f, 0x64
    2015-12-23 10:07:46.335 Detail,
    2015-12-23 10:07:46.335 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
    2015-12-23 10:07:46.335 Detail, Node015, Expected reply was received
    2015-12-23 10:07:46.335 Detail, Node015, Message transaction complete
    2015-12-23 10:07:46.336 Detail,
    2015-12-23 10:07:46.336 Detail, contrlr, Removing current message
    2015-12-23 10:07:46.336 Detail,
    2015-12-23 10:07:46.336 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-23 10:07:46.337 Detail, contrlr, Removing current message
    2015-12-23 10:07:46.337 Detail,
    2015-12-23 10:07:46.337 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-23 10:07:46.342 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
    2015-12-23 10:07:46.342 Detail,
    2015-12-23 10:07:46.342 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
    2015-12-23 10:07:46.342 Info, Node001, Neighbors of this node are:
    2015-12-23 10:07:46.342 Info, Node001, (none reported)
    2015-12-23 10:07:46.342 Detail, Expected reply was received
    2015-12-23 10:07:46.342 Detail, Message transaction complete
    2015-12-23 10:07:46.343 Detail,
    2015-12-23 10:07:46.343 Detail, Node001, Removing current message
    2015-12-23 10:07:46.343 Detail, Node001, Query Stage Complete (Neighbors)
    2015-12-23 10:07:46.343 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
    2015-12-23 10:07:46.343 Detail, Node001, QueryStage_Session
    2015-12-23 10:07:46.343 Detail, Node001, QueryStage_Dynamic
    2015-12-23 10:07:46.343 Detail, Node001, QueryStage_Configuration
    2015-12-23 10:07:46.343 Detail, Node001, QueryStage_Complete
    2015-12-23 10:07:46.343 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
    2015-12-23 10:07:46.343 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
    2015-12-23 10:07:46.343 Info, Node query processing complete.
    2015-12-23 10:07:46.343 Detail, Node001, Notification: NodeQueriesComplete
    2015-12-23 10:07:46.344 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 10:07:46.474 Detail, contrlr, Notification: AllNodesQueried
    2015-12-23 10:07:46.475 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee

    Any help is greatly appreciated!

    Henri

    #2183

    K.Rens
    Admin bbPress

    Hi, welcome.

    Serial port /dev/ttyACM0 opened
    => your usb key is succesfully recognized and working.
    It will not be listed in your list of devices.

    For greenwave:
    – Take it closer to your usb key
    – Inside PulseStation administration / services / zwave, press the controller commands button and then add.
    – Wait till it says “You can now interact with your device”
    – Reset your greenwave and put it in inclusion mode (see manual)

    You should see a green tick that it added it.

    From you log I do not see you trying to add the device.

    Kind regards,
    K.Rens

    #2185

    hgravatar
    Participant

    Hello K.,

    I tried. Unfortunately no result. Here’s my log this time:

    2015-12-23 12:53:23.870 Always, OpenZwave Version 1.3.0 Starting Up
    2015-12-23 12:53:23.871 Info, Setting Up Provided Network Key for Secure Communications
    2015-12-23 12:53:23.871 Info, mgr, Added driver for controller /dev/ttyACM1
    2015-12-23 12:53:23.872 Info, Opening controller /dev/ttyACM1
    2015-12-23 12:53:23.872 Info, Trying to open serial port /dev/ttyACM1 (attempt 1)
    2015-12-23 12:53:23.875 Info, Serial port /dev/ttyACM1 opened (attempt 1)
    2015-12-23 12:53:23.876 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-23 12:53:23.876 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-23 12:53:23.876 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-23 12:53:23.876 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-23 12:53:23.876 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-23 12:53:23.876 Detail,
    2015-12-23 12:53:23.876 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
    2015-12-23 12:53:23.879 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
    2015-12-23 12:53:23.879 Detail,
    2015-12-23 12:53:23.879 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
    2015-12-23 12:53:23.879 Info, contrlr, Static Controller library, version Z-Wave 3.95
    2015-12-23 12:53:23.879 Detail, Node045, Expected reply was received
    2015-12-23 12:53:23.879 Detail, Node045, Message transaction complete
    2015-12-23 12:53:23.879 Detail,
    2015-12-23 12:53:23.879 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.879 Detail,
    2015-12-23 12:53:23.879 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
    2015-12-23 12:53:23.881 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0x00, 0x00, 0xf6, 0xee, 0x01, 0xcf
    2015-12-23 12:53:23.882 Detail,
    2015-12-23 12:53:23.882 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0x0000f6ee. Our node ID = 1
    2015-12-23 12:53:23.882 Detail, Expected reply was received
    2015-12-23 12:53:23.882 Detail, Message transaction complete
    2015-12-23 12:53:23.882 Detail,
    2015-12-23 12:53:23.882 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.882 Detail,
    2015-12-23 12:53:23.882 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
    2015-12-23 12:53:23.883 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
    2015-12-23 12:53:23.884 Detail,
    2015-12-23 12:53:23.884 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
    2015-12-23 12:53:23.884 Info, contrlr, There is no SUC ID Server (SIS) in this network.
    2015-12-23 12:53:23.884 Info, contrlr, The PC controller is a primary controller.
    2015-12-23 12:53:23.884 Detail, Node215, Expected reply was received
    2015-12-23 12:53:23.884 Detail, Node215, Message transaction complete
    2015-12-23 12:53:23.884 Detail,
    2015-12-23 12:53:23.884 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.884 Detail,
    2015-12-23 12:53:23.884 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
    2015-12-23 12:53:23.888 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
    2015-12-23 12:53:23.888 Detail,
    2015-12-23 12:53:23.888 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
    2015-12-23 12:53:23.888 Info, contrlr, Serial API Version: 1.0
    2015-12-23 12:53:23.888 Info, contrlr, Manufacturer ID: 0x0086
    2015-12-23 12:53:23.888 Info, contrlr, Product Type: 0x0001
    2015-12-23 12:53:23.888 Info, contrlr, Product ID: 0x005a
    2015-12-23 12:53:23.888 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-23 12:53:23.888 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-23 12:53:23.889 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-23 12:53:23.889 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-23 12:53:23.889 Detail, Expected reply was received
    2015-12-23 12:53:23.889 Detail, Message transaction complete
    2015-12-23 12:53:23.889 Detail,
    2015-12-23 12:53:23.889 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.889 Detail,
    2015-12-23 12:53:23.889 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
    2015-12-23 12:53:23.890 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
    2015-12-23 12:53:23.891 Detail,
    2015-12-23 12:53:23.891 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
    2015-12-23 12:53:23.891 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
    2015-12-23 12:53:23.891 Detail, Node172, Expected reply was received
    2015-12-23 12:53:23.891 Detail, Node172, Message transaction complete
    2015-12-23 12:53:23.891 Detail,
    2015-12-23 12:53:23.891 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.891 Detail,
    2015-12-23 12:53:23.891 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
    2015-12-23 12:53:23.947 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0x64, 0xac, 0x1f, 0xfe, 0x14, 0xd0, 0x2d, 0x4e, 0xc4, 0xe6, 0xc7, 0x31, 0x5e, 0x2b, 0x65, 0x1f, 0x70, 0x41, 0x7a, 0xec, 0x9a, 0xbf, 0xe1, 0xdb, 0xfa, 0x43, 0x7f, 0x7b, 0xf2, 0xe1, 0xff, 0xc1, 0x9b
    2015-12-23 12:53:23.947 Detail,
    2015-12-23 12:53:23.948 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
    2015-12-23 12:53:23.948 Detail, Node032, Expected reply was received
    2015-12-23 12:53:23.948 Detail, Node032, Message transaction complete
    2015-12-23 12:53:23.948 Detail,
    2015-12-23 12:53:23.948 Detail, contrlr, Removing current message
    2015-12-23 12:53:23.948 Detail,
    2015-12-23 12:53:23.948 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
    2015-12-23 12:53:24.049 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
    2015-12-23 12:53:24.049 Detail,
    2015-12-23 12:53:24.049 Info, mgr, Driver with Home ID of 0x0000f6ee is now ready.
    2015-12-23 12:53:24.049 Info,
    2015-12-23 12:53:24.050 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
    2015-12-23 12:53:24.050 Info, contrlr, Node 001 – Known
    2015-12-23 12:53:24.050 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
    2015-12-23 12:53:24.050 Detail, Node001, QueryStage_Probe1
    2015-12-23 12:53:24.050 Detail, Node001, QueryStage_Associations
    2015-12-23 12:53:24.050 Detail, Node001, QueryStage_Neighbors
    2015-12-23 12:53:24.050 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
    2015-12-23 12:53:24.050 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-23 12:53:24.051 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
    2015-12-23 12:53:24.051 Detail, Expected reply was received
    2015-12-23 12:53:24.051 Detail, Message transaction complete
    2015-12-23 12:53:24.051 Detail,
    2015-12-23 12:53:24.051 Detail, contrlr, Removing current message
    2015-12-23 12:53:24.051 Detail, Node001, Notification: DriverReady
    2015-12-23 12:53:24.052 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.178 Detail, Node001, Notification: NodeAdded
    2015-12-23 12:53:24.179 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.301 Detail, Node001, Notification: NodeProtocolInfo
    2015-12-23 12:53:24.302 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.429 Detail, Node001, Notification: EssentialNodeQueriesComplete
    2015-12-23 12:53:24.430 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.556 Detail, Node001, Notification: ValueAdded
    2015-12-23 12:53:24.557 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.679 Detail, Node001, Notification: NodeNaming
    2015-12-23 12:53:24.680 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.809 Detail,
    2015-12-23 12:53:24.809 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
    2015-12-23 12:53:24.811 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x64, 0x0f, 0x96
    2015-12-23 12:53:24.811 Detail,
    2015-12-23 12:53:24.811 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
    2015-12-23 12:53:24.811 Detail, Node015, Expected reply was received
    2015-12-23 12:53:24.811 Detail, Node015, Message transaction complete
    2015-12-23 12:53:24.811 Detail,
    2015-12-23 12:53:24.811 Detail, contrlr, Removing current message
    2015-12-23 12:53:24.811 Detail,
    2015-12-23 12:53:24.811 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
    2015-12-23 12:53:24.812 Detail, contrlr, Removing current message
    2015-12-23 12:53:24.812 Detail,
    2015-12-23 12:53:24.813 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
    2015-12-23 12:53:24.817 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
    2015-12-23 12:53:24.818 Detail,
    2015-12-23 12:53:24.818 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
    2015-12-23 12:53:24.818 Info, Node001, Neighbors of this node are:
    2015-12-23 12:53:24.818 Info, Node001, (none reported)
    2015-12-23 12:53:24.818 Detail, Expected reply was received
    2015-12-23 12:53:24.818 Detail, Message transaction complete
    2015-12-23 12:53:24.818 Detail,
    2015-12-23 12:53:24.818 Detail, Node001, Removing current message
    2015-12-23 12:53:24.818 Detail, Node001, Query Stage Complete (Neighbors)
    2015-12-23 12:53:24.818 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
    2015-12-23 12:53:24.818 Detail, Node001, QueryStage_Session
    2015-12-23 12:53:24.819 Detail, Node001, QueryStage_Dynamic
    2015-12-23 12:53:24.819 Detail, Node001, QueryStage_Configuration
    2015-12-23 12:53:24.819 Detail, Node001, QueryStage_Complete
    2015-12-23 12:53:24.819 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
    2015-12-23 12:53:24.819 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
    2015-12-23 12:53:24.819 Info, Node query processing complete.
    2015-12-23 12:53:24.819 Detail, Node001, Notification: NodeQueriesComplete
    2015-12-23 12:53:24.820 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:24.960 Detail, contrlr, Notification: AllNodesQueried
    2015-12-23 12:53:24.961 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:57.981 Detail, contrlr, Queuing (Controller) Add Device
    2015-12-23 12:53:57.981 Info, Add Device
    2015-12-23 12:53:57.981 Detail, contrlr, Queuing (Command) ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
    2015-12-23 12:53:57.981 Detail, Notification: ControllerComand – Starting
    2015-12-23 12:53:57.982 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:58.113 Detail,
    2015-12-23 12:53:58.113 Info, contrlr, Sending (Command) message (Callback ID=0x0a, Expected Reply=0x4a) – ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
    2015-12-23 12:53:58.115 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x01, 0x00, 0x00, 0xb9
    2015-12-23 12:53:58.115 Detail,
    2015-12-23 12:53:58.115 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-23 12:53:58.116 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
    2015-12-23 12:53:58.116 Detail, Node001, Expected callbackId was received
    2015-12-23 12:53:58.116 Detail, Node001, Expected reply was received
    2015-12-23 12:53:58.116 Detail, Node001, Message transaction complete
    2015-12-23 12:53:58.116 Detail,
    2015-12-23 12:53:58.116 Detail, contrlr, Removing current message
    2015-12-23 12:53:58.116 Detail, Notification: ControllerCommand – Waiting
    2015-12-23 12:53:58.117 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:53:58.387 Info, WriteNextMsg Controller nothing to do
    2015-12-23 12:54:50.959 Info, Cancel Add Node
    2015-12-23 12:54:50.960 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-23 12:54:50.960 Detail,
    2015-12-23 12:54:50.960 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-23 12:54:50.960 Detail, Notification: ControllerCommand – Canceled
    2015-12-23 12:54:50.961 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:54:51.011 Info, Cancel Add Node
    2015-12-23 12:54:51.011 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-23 12:54:51.120 Detail, Notification: ControllerCommand – Canceled
    2015-12-23 12:54:51.122 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:54:51.270 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
    2015-12-23 12:54:51.270 Detail,
    2015-12-23 12:54:51.270 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-23 12:54:51.270 Info, contrlr, ADD_NODE_STATUS_DONE
    2015-12-23 12:54:51.270 Detail, Node006, Expected reply was received
    2015-12-23 12:54:51.271 Detail, Node006, Message transaction complete
    2015-12-23 12:54:51.271 Detail,
    2015-12-23 12:54:51.271 Detail, contrlr, Removing current message
    2015-12-23 12:54:51.271 Detail, Notification: ControllerCommand – Completed
    2015-12-23 12:54:51.272 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee
    2015-12-23 12:54:51.396 Detail,
    2015-12-23 12:54:51.396 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
    2015-12-23 12:54:51.448 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
    2015-12-23 12:54:51.448 Detail,
    2015-12-23 12:54:51.448 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-12-23 12:54:51.449 Info, contrlr, ADD_NODE_STATUS_DONE
    2015-12-23 12:54:51.449 Detail, Node006, Expected reply was received
    2015-12-23 12:54:51.449 Detail, Node006, Message transaction complete
    2015-12-23 12:54:51.449 Detail,
    2015-12-23 12:54:51.449 Detail, contrlr, Removing current message
    2015-12-23 12:54:51.449 Detail, Notification: ControllerCommand – Completed
    2015-12-23 12:54:51.450 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x0000f6ee

    Any ideas?

    I’ve looked at the manual of the greenwave powernode. I have two of them and they both function not as the manual states. When doing the inclusion process they only show a rotating single green bar instead of a double bar. However, it does show the flickering at the end, which should occur, according to the manual, when the inclusion succeeds. I can’t do the process of exclusion or reset though. It doesn’t respond to holding either the sync or the power button for 5 seconds or more. So I don’t know what’s wrong.

    I also tried to run the IMA tool on a windows workstation. The stick gets recognised as a controller, but it doesn’t find the two greenwaves, even when one is located right next to the computer.

    So I’m not sure if the fault is in the Aeon or in the two greenwaves.

    Any help appreciated.

    Henri

    #2186

    hgravatar
    Participant

    Oh, I’ve cleared the configuration files of the controller through Pulse Station. I found these lines in the log after clearing:

    2015-12-23 13:22:33.217 Info, Node001, Received reply to FUNC_ID_ZW_GET_NODE_PROTOCOL_INFO
    2015-12-23 13:22:33.217 Info, Node001, Protocol Info for Node 1:
    2015-12-23 13:22:33.217 Info, Node001, Listening = true
    2015-12-23 13:22:33.217 Info, Node001, Beaming = true
    2015-12-23 13:22:33.217 Info, Node001, Routing = false
    2015-12-23 13:22:33.217 Info, Node001, Max Baud Rate = 40000
    2015-12-23 13:22:33.217 Info, Node001, Version = 4
    2015-12-23 13:22:33.217 Info, Node001, Security = false
    2015-12-23 13:22:33.224 Info, Node001, Basic device class (0x02) – Static Controller
    2015-12-23 13:22:33.225 Info, Node001, Generic device Class (0x02) – Static Controller
    2015-12-23 13:22:33.225 Info, Node001, Specific device class (0x01) – Static PC Controller
    2015-12-23 13:22:33.225 Info, Node001, COMMAND_CLASS_BASIC is not mapped
    2015-12-23 13:22:33.225 Info, Node001, Mandatory Command Classes for Node 1:
    2015-12-23 13:22:33.225 Info, Node001, None
    2015-12-23 13:22:33.225 Info, Node001, Mandatory Command Classes controlled by Node 1:
    2015-12-23 13:22:33.225 Info, Node001, COMMAND_CLASS_BASIC
    2015-12-23 13:22:33.225 Detail, Node022, Expected reply was received
    2015-12-23 13:22:33.225 Detail, Node022, Message transaction complete

    Routing is false. Is that the problem?

    I tried adding a device after the clearing of the configuration. Still no result.

    #2187

    K.Rens
    Admin bbPress

    Hi,

    I’ve never heard of the IMA tool before.
    It sounds very interesting. Can you already buy it somewhere?

    If you have no other devices linked, you could try to reset your controller itself and the greenwave.
    Wait till the controller is fully loaded and doesn’t write a lot of new log files quickly.
    Put the controller in learning mode (add device).
    Then reset the greenwave and put it in inclusion mode.

    Otherwise I will have to buy a greenwave device myself as well.
    Do you have a single plug or the 6-plug?

    It should be supported by the z-wave library we are using, so it should just work.

    Kind regards,
    K.Rens

    #2189

    hgravatar
    Participant

    Done that. Didn’t work. I’m returning the Aeon stick and the greenwaves to the shop and ordered a new set to try it again.

    The IMA tool is from Aeon self. You can download it as a testing tool from their website: http://aeotec.com/z-wave-usb-stick/1358-z-wave-drivers.html

    See Z-Stick Gen5 Drivers and Tools.

    I’ll post an update about the new set as soon as I get it and can test it out.

    #2194

    K.Rens
    Admin bbPress

    Ok, great.
    If it then still doesn’t work, just contact me and we’ll book a session to investigate it.

    I installed the IMA tool, but no window appears.
    Will try again tonight.

    Kind regards,
    K.Rens

    #2200

    hgravatar
    Participant

    I received my new starterskit. This time it works like a charm 🙂
    So I guess the Aeon Labs stick had a defect.

    I installed the IMA tool, but no window appears.
    Will try again tonight.

    Strange that you can’t see the window. I tried it on my Windows7 laptop and it worked just fine.

    #2204

    K.Rens
    Admin bbPress

    Pfieuw, glad it’s working.

    I’m on Windows 10.
    I don’t have a stick in my computer yet, should I put it in first?
    It does use 50% of my cpu, so it’s doing something…

    Kind regards,
    K.Rens

    #2210

    hgravatar
    Participant

    Yes I think I had the stick already attached to the USB port. In the text file there are some instructions for windows10 I thought. I had to do a couple of more actions, because I have windows7 running.

    #2248

    K.Rens
    Admin bbPress

    Ok, with the usb key plugged in the IMA tool is working.
    But it tells me nothing more then just a traffic light, in my case almost everything was green 🙂

    Kind regards,
    K.Rens

    #2252

    hgravatar
    Participant

    Strange. On windows7 it showed a complete log of what it did. I could also add devices to test and remove them. That didn’t work with my old stick though 😉

12 sujets de 1 à 12 (sur un total de 12)

Vous devez être connecté pour répondre à ce sujet.