Domotica gratuit › Forums › Report a bug › Bug in multi sleeping ?
Mots-clés : Multi sleep
Ce sujet a 6 réponses, 3 participants et a été mis à jour par RoyalTaz, il y a 2 ans et 12 mois.
I’ve two scenario with similar blocky :
Sleep 30 min
Close roller shutter at first floor
If sunset AND button switch on
PHP script to send me mail
Sleep 30 min
Close roller shutter at ground floor
Until i’ve made the second scenario, my rollers are inactive, but i receve the mail.
One hour after, nothing neither.
Is there a bug with two sleep blocky at same moment ?
This should work.
Can you send screenshots of both scenes?
It sounds like blocky cannot close your shutters, in neither for the 2 scenes?
Sounds like the close shutter blocks are wrong, instead of the sleep.
I’ve another idea, i’ll be back ( 😉 ).
Here are my scenes :
I’ve also tested anothe scene with all in one :
And same thing, nothing move :-s
If i place mail script (php) in each step, all of those are receved.
in other hand, i’ve others good script, for ex :
In fact all is good, after change the “100” to “99”.
I don’t know why this “100” block all my rollers…
I did calibrate few times my rollers but no improvment, still opening at 99%.
Do you know why ? (PS, my modules are Fibaro FGRM-222)
Hey, depending on the actual roller blind I have maximum values of either 99 or 98. Never 100. So I guess, the scale is 0-99 not 0-100. That is why setting to 100 doesnt do anything…
Indeed, certain roller blinds never go to 100.
Very strange, but lots of users have this.
If 99 is sufficient for you, then just use 99.
I think it will probably be the max.
I’ll add it in the FAQ explaining this.
Yes, 99% is sufficient, and if i push the up button, nothing move, so my rollers are really at 100%…. At 99% 😛
The thing I don’t understand is why the opening at 100% blocked the closing part …. but hey, now that works … 😉
Thanks for your replys !
Vous devez être connecté pour répondre à ce sujet.
Log in / Register