Connect with ImperiHome

Ce sujet a 6 réponses, 3 participants et a été mis à jour par  fabdomo, il y a 1 an et 10 mois.

7 sujets de 1 à 7 (sur un total de 7)
  • Auteur
    Messages
  • #1053

    fabdomo
    Participant

    Just installed Pulse Station, entered administration pages and all looks good!

    Is it possible to check the connection without having nodes?
    I don’t have any modules yet, but I just want to see if I can connect from my iPhone to the Synology Pulse Station setup… If this works: than I need to have more time 😉

    Followed the explanation on this site, but cannot connect.

    At this moment I get an error:

    Error 🙁
    Invalid response from API

    Is this normal behavior when I don’t have any modules? Or can I check anything?

    Thanks for any help!

    #1054
    Mika
    Mika
    Admin bbPress

    Normally it should work without any modules.

    Just check that the service is running and try the following url : http://ipnas:4070
    It should return something!

    #1074

    Fabian
    Participant

    Are there any steps besides installing the server and dbase? Those services started, but no connection possible (Firewall disabled). I can access the admin link, however I cannot change my password (I don’t get a failure notice, but the new password isn’t saved). This might look like a wrong permission on the database?

    #1075
    Mika
    Mika
    Admin bbPress

    Your problem with Imperihome is solved ?

    You talk about another problem here ?
    When you change your password (in the “users” part), you have to click on the save button.

    #1076

    Fabian
    Participant

    No, its the same problem but another part I think.

    I did hit Save (multiple times) but it will not save. Uninstalled the package, reinstalled but same thing.

    I created a new user with a random password, but that password didn’t work… Tonight I will have a look again.

    It would be fantastic if I get this to work :-).

    Fabian

    #1077
    Mika
    Mika
    Admin bbPress

    Not sure that I understand your problem.

    Can you connect to “http://ipnas/PulseStation/administration” with the user “admin/admin” ?
    If yes :
    * Is the Imperihome service installed ?
    * If yes, is the service running ?
    * If yes, does “http://ipnas:4070” return something ?

    (We’ll take a look at your problem of user afterward)

    #1328

    fabdomo
    Participant

    User problem is solved 🙂

    Can you connect to “http://ipnas/PulseStation/administration” with the user “admin/admin” ?
    # Yes, no problem

    If yes :
    * Is the Imperihome service installed ?
    # Installed the Imperihome app at the phone, still searching for info on the service (which I think is needed to act as a server / bridge between Imperihome and Synology… but not shure.

    * If yes, is the service running ?
    # App on the iPhone – Yess, Imperihome service on the Synology NOT
    # Pulsestation shows green OK icon.

    * If yes, does “http://ipnas:4070″ return something ?
    # Nothing

    Firewall is not enabled on the Synology, I connect local with my local ip from my iPhone which has a local Wifi connection (same IP range).

    Probably some step I forgot 🙂

    (We’ll take a look at your problem of user afterward)

7 sujets de 1 à 7 (sur un total de 7)

Vous devez être connecté pour répondre à ce sujet.