DSM Version 6 + Pulsestation Problem

[mate]

Hi to all,

Since the upgrade of my synology DS212+ to DSM 6 I am not able to start Pulsestation in the paquet center … Thes status is STOPPED and not possible to activate ….

Has everybody the same problem and issue ?

Christian

[Mika]

I didnt have the time to investigate DSM6 but I suppose that it’s a problem of compilation.
Maybe the toolchain has changed, I have to investigate that…

Mika

[coldbringer]

Hey, I am having trouble also. The USB controller cannot be found, maybe they have renamed the USB ports? ttyACM0 is no longer correct. No results ttyS0 or ttyUSB0 either.

[ 0.000000] Kernel command line: root=/dev/md0 rw syno_hw_version=DS213pv10 c onsole=ttyS0,115200 ip=off ihd_num=2 netif_num=1 ip=off initrd=0x2000040,4M
[ 5.917048] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
[ 5.923754] console [ttyS0] enabled, bootconsole disabled
[ 5.934763] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42) is a 16550A
[ 84.401299] cdc_acm 2-3:1.0: ttyACM0: USB ACM device

[coldbringer]

In my case it’s not DSM6 but DSM 5.2-5644, automatic update of last night.

[RoyalTaz]

Hello !

Me too, i’ve “ERROR: Failed to open serial port /dev/ttyACM0” on my DS110+ with 5.2-5644
I’ve removed PulseStation then reinstaller it, but no change.

[Dave]

Hallo,
have you tried to connect via SSH using Putty (as described herein: https://www.pulse-station.com/frequently-asked-questions/ under “How do I know my USB key is detected”) to get the right setup?

[coldbringer]

yup, i have posted my putty output above. looks like it should still be ttyACM0 (in theory)

[RoyalTaz]

Me too, i’ve the same things :
[ 1.350389] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
[ 26.708953] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 306.184200] cdc_acm 1-1:1.0: ttyACM0: USB ACM device

[coldbringer]

I have searched the Synology forums and found a guy who develops special USB drivers for Z-Wave sticks on Synology NAS systems. He even mentioned the support of the latest DSM version 5.2-5644. So now I am pretty sure it is a driver-related issue. Obviously, there is currently another issue that USB 3.0 harddisks on the USB 3.0 port work at USB 2.0 speed only.

I have installed the driver package but it didn’t help. Maybe you want to try it yourselves:

http://www.jadahl.com/drivers.html

[RoyalTaz]

Hello !

Mika have made an upgrade !

It’s the 1.2.2.
So, upgrade, reboot the Syno…and run 😉

Rgds

[K.Rens]

Hi, latest news:

1) Update DSM 5.2-5644
This one works with PulseStation.
If in the logs of Z-wave after the update you see “Error code 13”, you will have to grant access rights to the usb key again for PulseStation.
Execute following commands via ssh:
chmod 777 /dev/ttyACM0
chmod 777 /dev/ttyUSB0

2) DSM 6.0
There is no toolchain available yet to build the new drivers.
Once it’s available we can build compatible drivers.
So please wait a bit before installing it, just to be certain.

Kind regards,
K.Rens

[dartagnan]

Hi
with DSM 6.0 Beta, I can’t add the repository, an error occurs : La connexion a echoué
if i remove the pulse repo the problem no longer occurs

Thanks

[Mika]

Hi All,

Looking for someone who is on DSM 6.
Have the necessary stuff to start it!

Will start in the coming days…
I eventually need access to the NAS (ssh, folder ./web/PulseStation file filestation) to debug it…

If someone is interested, feel free to contact me!

Mika.

[121an193]

Hi,

Still looking for someone on DSM 6 (beta 2) ?

Laurent

Dieu est mort, Marx est mort et moi-même, je ne me sens pas très bien... (Woody Allen)

[K.Rens]

Yes, we are still looking for people on DSM 6 for helping us test whether our software works or not.
We can build a custom package for you if you are willing to help us, all we need to know is your NAS model.

Kind regards,
K.Rens

[Auteur]

Messages