How to stop a scene?

Domotica gratuit Forums How can I …? Synology NAS How to stop a scene?

Mots-clés : 

Ce sujet a 2 réponses, 3 participants et a été mis à jour par Mika Mika, il y a 1 an et 6 mois.

3 sujets de 1 à 3 (sur un total de 3)
  • Auteur
    Messages
  • #2889

    eCler
    Participant

    Hi,
    I added a scene as a device on the dashboard (by “generate panels”). It adds a panel with 1 button “button.send”. I changed the button text to “Run”.

    1. The panel starts the scene successfully (or it was already active?) but I cannot understand how I can stop the scene working?

    2. I added “Run scene manually” at the beginning of the scene. How this “manually” works? Does it stop after one run?

    • Ce sujet a été modifié le il y a 1 an et 6 mois par  eCler.
    • Ce sujet a été modifié le il y a 1 an et 6 mois par  eCler.
    #2894

    K.Rens
    Admin bbPress

    I can only answer point 2, point 1 only Mika can answer.

    Point 2:
    By default scenes are executed every minute.
    If you do not IF put conditions in your scene itself, it will run.
    To avoid this, you can use the run scene manually block.
    This will stop the scene from running every minute, only when you press the button on the dashboard (or in imperihome), only then the scene will run.

    Kind regards,
    K.Rens

    #2939
    Mika
    Mika
    Admin bbPress

    Point 1, there are no function to stop a scene.
    The scene stop when all the blocks are executed.

    Normally the scenes take a few seconds/minutes(for a big one) to be executed.
    If there is a problem in the script, the scene stops.

    Do you need to stop a scene ?

3 sujets de 1 à 3 (sur un total de 3)

Vous devez être connecté pour répondre à ce sujet.