ImperiHome heating failure

[MrMorganParticipant]

Hey guys,

I have the issue that my heating device lost the node to the remote after 10 seconds.
I also use the ImperiHome App on my Smartphone. There can I see all my devices and I get also the current temperature of all rooms. But I can’t set the temperature of the devices. After 3 seconds they fall back to the default value “0”.

In the next hours I will sent you the .xml and .json file

Thanks for your help!!!

[K.RensAdmin bbPress]

Hi,

Did you send the files?
If it is battery powered, it could be that it takes till the wake-up of the device untill the parameters are updated.

Kind regards,
K.Rens

[MrMorganParticipant]

Hi,

yes I send it to the e-mail address info(at)pulse-station.com.
Please contact Mikael G. he wrote me yesterday, that he will take a look soon.
But if you want, I can sent you the e-mail twice to another adress.

cheers

[K.RensAdmin bbPress]

No, if Mikael is looking at it, it’s fine.
Tx

Kind regards,
K.Rens

[MrMorganParticipant]

Hi,

yes the devices are battery powered.
If I go to the device settings in the “z-wave services” I can see a lot of – default – setting values, but if I want to change it, the devices fall back to the default value same like in the ImperiHome app. I guesss that the PulseStation – software don’t accept my changes and save my entries because of the node connection failure, it’s not a failure with the wake-up feature. I also guess that beacause of the node failure only a half of functionalities are actice. I can see the settings of the device and can see the current temperature, but I can’t sent commands to the device – only a one way connection.

cheers

• Cette réponse a été modifiée le il y a 2 ans et 2 mois par  MrMorgan.

[K.RensAdmin bbPress]

Could be.

Is the device associated to the zwave-1 key?

What you can try is:
change parameter
wake up device, wait 15 seconds, wake it up again
refresh PulseStation and verify whether the parameter is updated or not.

If not, it’s probably not yet supported and needs to be added.

Kind regards,
K.Rens

[MrMorganParticipant]

My devices are:

AEOTEC Z-Stick Gen5 (Remote)
Model: ZW090-C

Devolo Home Control (Thermostat Device)
Model: 9356

Do you have shared a list of all supported devices?

[MrMorganParticipant]

Hey guys,

are you working on a new realease which containts some new devices like the fibaro heat control?

Kind regards

[Miss LauraModérateur]

Aeotec stick should just work.
Devolo home control in the next zwave update.

Below is a list of all devices that are supported now or will be supported in the next update:
https://github.com/OpenZWave/open-zwave/blob/master/config/manufacturer_specific.xml

Worst case you can add the lines from your device already manually inside PulseStation files and then they should work already now.

Have fun,
Laura

[MrMorganParticipant]

Hello,

after the last update my Devolo heating devices are now supported. At the moment the devices lost their association to the z-Wave stick after 30 seconds. In the first 30 seconds I can sent commands to the devices and they accept it. What can I do to keep the connection up?

thank you

[Auteur]

Messages