mars 27, 2016 à 5:09 #3036
As far as I understand, the idea of this service is for my PulseStation instance to be “permanently” connected to my.pulse-station being able to manage it without opening ports and exposing the whole PulseStation to the internet. The same concept currently applied for DSApps which are accessible through username.synology.me. Am I right?
I have correctly configured all params on my Synology’s PulseStation but I get an error trying to access it through my.pulse-station.com —
It seems that we cannot access your PulseStation server.
I have allowed communication from Synology itself to mentioned 4020 port and also 4090 (as this one appears on advance properties).
Is there something else I missed?
Thanks in advance and congrats for this great product guys!
Regardsmars 28, 2016 à 4:11 #3042
Did you fill in the correct data inside my.pulse-station.com?
It needs it in order to know which synology to connect to.
After you install the myPulseStation add-on, configure the settings inside my.pulse-station.com, wait 5 minutes and then it should have downloaded your device settings etc.
It should then just work.
It’s a push from your pulsestation installation to my.pulse-station.com
So normally no ports should be opened additionally, your synology just needs internet access.
K.Rensmars 30, 2016 à 5:42 #3105
Sorry K.Rens, I’m encountering same issue too.
Port 4020 & 4090 are opened on my side and for me configuration is OK too…
Can I send you screenshots by emails?
Thx.avril 12, 2016 à 3:28 #3166
Same issue for me. Inscription on my.pulsestation never asked me for user-to-sync or phonenumbers that seems to be filled in mypulsestation service.
After creating new user and receiving my pulsestation key by email, I filled the information in mypulsestation service but the web interface endlessly says “Retrieving data from your PulseStation server …”avril 15, 2016 à 8:06 #3198
Can you check that the MyPulseStation service is up to date ?
There is also a difference between dsm 5 (php5) and dsm6(php5.6)avril 18, 2016 à 10:35 #3204
Your tips about change of PHP Version seems to not solve the case….still same message as Mercusot.
Regardsavril 19, 2016 à 9:00 #3230
And the version of MyPulseStation, what is it ?avril 19, 2016 à 9:24 #3236
On my side v 1.0.5 is installed.
I just checked once again (as yesterday I applied tips on PHP 5.6 versus 6), but still not available.avril 20, 2016 à 4:58 #3239
I’m still on DSM 5, version 1.3.1 of pulse-station (core 1.0.5 and Scene 1.0.4)avril 22, 2016 à 2:17 #3285
I’ll take a look because I’m also on dsm5…
Vous devez être connecté pour répondre à ce sujet.