I just bought a Z-Wave Philio 4-in-1 Sensor, PHI_PST02-1A.
I inlcuded it correctly, but after this my whole system crashed!!!
I want to fix the sensor at my blind, so I need all the 4 sensors:
– PIT: alarm system
– Door/Window: blind is open/not
– Temperature: steer my window-shutter
– Luminance: steer my window-shutter
When I included the Sensor, I thought to get a “Routing Binary Sensor”, but it was only “Notification sensor”.
After searching the Internet I found Parameter 5 has to change from “0” to”8″ to get Celsius.
I opened the Sensor and pressed the front Tamper-Button to wake-up.
But the sensors wasn`t interested in my new paramenter…
At Imperihome I only got ONE new Sensor-Device (Sensor). Temperature, PIR and Luminace missed…
OperationMode: Default “0”. as mentioned I need all 4 sensors.
d)How can I cange?
To “program” the sensor: Does it have to be fixed, because the Tamper-Button in the rear has to be pressed alltime?
Sorry, this is the worst device I bought already now and I`m spoild with the 4-1 Eye from Fiaro…