Mots-clés : firstname.lastname@example.org
octobre 24, 2015 à 12:19 #1491
i try to set up my system but i have some difficulties. The general setup was not a problem, but for example changing settings of my Fibaro motion sensor or Danfoss Living connect makes me lot of problems.
I move to services/z-wave/click on editing/settings, change the settings and click on ok. But the settings weren’t saved. So when i reopen the settings i find all the standard settings again. This happens with my Fibaro and my Danfoss.
I tried to change the settings here: web\PulseStation\data\zwcfg_0xf2b94053.xml. But After changing them some of the settings change back to the original value. For example i can’t change the current Day on the Danfoss or change the current hour and minute.
On “https://www.pulse-station.com/forums/topic/danfoss-live-connect/” you write Pulsestation generates panels on its own. But when I follow your instruction nothing ist going to happen. There are no automatically generated panels.
Currently I can’t open any Graphics. I only see Loading database’s data without any end.
Can you please help me?octobre 24, 2015 à 12:47 #1492
It sounds like you did not install MariaDB inside your synology?
Can you try installing this package first?
It stores parameters until your device picks it up, it’s needed to store data that will be shown in the graph’s, …
You can best also install the database service from the store and link it to the database.
Then it can store your graph data.
K.Rensoctobre 24, 2015 à 1:00 #1493
MariaDB is already installed and I use the root user for PulseStation.octobre 24, 2015 à 1:41 #1494
Okay after editing the Port in my Synology the Graphics are available. But the other Problems stay the same.octobre 24, 2015 à 10:00 #1501
For parameter changes I also have to wait about one hour for devices without a battery and about 24 hours for wake-up devices (with battery) before they are actually updated.
But that’s quite normal, no?
You can speed up the learning of new parameters a bit by waking up the devices a few times, eg by pressing the button 3 times.
K.Rensoctobre 25, 2015 à 12:05 #1503coldbringerParticipant
Oh well, Dave’s problems sound all too familiar to me. Same here: When I make changes to the parameters of my Fibaro Smoke Sensors they will be ignored. Not a single change has ever worked here – despite waiting for days, making sure the device has been awake (log-file) and having the MariaDB-Package on the diskstation. I think there is a general issue behind this symptom.octobre 25, 2015 à 7:47 #1507MikaMaître des clés
I’m busy with the updating of the Zwave Service and especially the OpenZwave library.
Wait for the next release…octobre 25, 2015 à 6:33 #1515
Thanks!février 12, 2016 à 9:56 #2712RenéParticipant
should fix the latest version of PulseStation this “device – update – problem”? Because my problems are still exist. I can’t change for example the date on my Danfoss Living connect 13
Renéfévrier 12, 2016 à 10:38 #2714
We don’t have a danfoss living connect 13, so we cannot test it.
But the smoke sensor parameters have been tested and are working for me in the latest beta.
As far as I know, it’s supposed to be released soon.
K.Rensmars 11, 2016 à 9:40 #2957RenéParticipant
But I bought a danfoss living connect 13 in the pulse-station shop?! I thought you support the products you sell?
It is still not possible to change the time or date, but I could change the wacke up time. So I hope to reduce the battery consumption. The danfoss LC13 needs more then 20% battery power once a month.
Renémars 18, 2016 à 9:19 #2983MikaMaître des clés
Dont know why you cannot change the wake up interval. Maybe a bug in the openzwave library.
But believe me, 20% in a month is not so bad. It means that your battery will work for 5 month which is “normal” for zwave device.
- Vous devez être connecté pour répondre à ce sujet.