Support of Z-Wave Aeotec Key Fob Gen5

Domotica gratuit Forums Feature requests Support of Z-Wave Aeotec Key Fob Gen5

Mots-clés : , , ,

Ce sujet a 1 réponse, 2 participants et a été mis à jour par  K.Rens, il y a 1 an et 2 mois.

2 sujets de 1 à 2 (sur un total de 2)
  • Auteur
    Messages
  • #3358

    cjescudero
    Participant

    I am including the Z-Wave Aecotec Key Fog Gen5 (ZW088) to Pulse-Station 1.3.0 in my RPi. It seems to be connected, but I cannot obtain the status of the buttons. In fact, I was analyzing the file with the service configuration (WEB/PulseStation/services/zwave/config/aeotec/keyfob2.xml ), and it corroborates my problem, since I cannot see any kind of configuration for the buttons.

    Is there any place to know how to modify the configuration for this device? Are you planning to include support for it?

    Thanks for your work.

    #3368

    K.Rens
    Admin bbPress

    I’ll ask Mika to contact you.
    Normally you can configure it inside the parameters and define what it should do inside blocky.

    Kind regards,
    K.Rens

2 sujets de 1 à 2 (sur un total de 2)

Vous devez être connecté pour répondre à ce sujet.