FarmerG

Toutes mes réponses sur les forums

9 sujets de 1 à 9 (sur un total de 9)
  • Auteur
    Messages
  • AvatarFarmerG
    Participant

    So, it seems that the remote fell to sleep after a few seconds.
    With pressing the “learn-button” for 3 seconds, it should be awake for 30 seconds.
    I did so about 10 minutes ago – and the miniremote is still active (Node.OK).

    But changing the mode of the remote-buttons in z-wave-service is still not be saved and in Blockly i can’t see the remote-device.
    How can the remote-buttons be recognized in Pulse-Station bzw. Blockly?

    en réponse à : Aeon Miniremote shows "Node failed" after successfully including #1526
    AvatarFarmerG
    Participant

    After including the Aeon-device is only for max. 10 seconds “NodeOK”.

    In this time you can only change one property for one button – but you could not save it (it fells back to “default button”).
    After this max. 10 seconds the Node went to “failure” and could not be reactivated.
    My first thought was “out of range”, but the same happens nearby the Diskstation.
    I think the Aeon-Miniremote is not compatible to Pulse-Station. 🙁

    en réponse à : ImperiHome and virtual devices #1497
    AvatarFarmerG
    Participant

    To restart the imperihome-service was not enough. I deleted and reinstalled the imperihome-service and now i can use the LOV-device in imperihome.
    But funnywise i have the only room, i’ve defined for my devices, 4 times in imperihome …

    • Cette réponse a été modifiée le il y a 4 années et 8 mois par AvatarFarmerG.
    en réponse à : ImperiHome and virtual devices #1487
    AvatarFarmerG
    Participant

    In “Advanced Properties” of the Imperihome-Service the “Virtual LOV” exists in the section “DevMultiSwitch”.
    But it’s still not available in imperihome. Hm …

    en réponse à : ImperiHome and virtual devices #1480
    AvatarFarmerG
    Participant

    Hm, on my Dashboard i can see my virtual LOV – but in imperihome it is not available.

    en réponse à : ImperiHome and virtual devices #1473
    AvatarFarmerG
    Participant

    Hi,
    i’m a Pulse-Station-newbie and want to ask if it would be possible to support the virtual “LOV-device” for the imperihome-API.
    Per LOV i control a group of wall-plugs (On/Off/Auto).

    Thanks,
    Stefan

    AvatarFarmerG
    Participant

    I think, i would like that. 🙂

    AvatarFarmerG
    Participant

    Not really flippy.
    But if touch the “On”-Button the button is highlighted for the “touching-time”, than the the “Off”-Button is “re-highlighted” for ca. 2 seconds – and after that (when bidirectional communication has ended) the “On”-Button is permanent highlighted.

    But i think, that there would not really exist a better way for signalisation “action” and “reaction”.

    P.S.: It was not possible to install Jing on the iPad. 😉

    • Cette réponse a été modifiée le il y a 4 années et 9 mois par AvatarFarmerG.
    AvatarFarmerG
    Participant

    Hi K.Rens,

    now it works.
    The On/Off-Buttons of the LOV-Device are visual “flippy” for a short time after touching – but the plugs work korrekt.

    Thank you for helping me and regards,
    Stefan

9 sujets de 1 à 9 (sur un total de 9)