LaplaceII

Toutes mes réponses sur les forums

15 sujets de 1 à 15 (sur un total de 70)
  • Auteur
    Messages
  • en réponse à : Yahoo weather doesn`work anymore #12033
    Avatar
    LaplaceII
    Participant

    Hello, Yahoo stopped the free weather API on the 3rd of January. A Workaround for PS is needed….I informed PS responsibles some days ago. Without weather API a lot of home automation logics will not work…e.g. roller shutter in dependence of Sunrise…some home Automation Software calculate data like Sunrise Time by themselves only by giving GPS coordinates…this makes the home Automation software independet from external APIs…(just an idea 😉)

    en réponse à : Event with Fibaro Mension Sensor #11991
    Avatar
    LaplaceII
    Participant

    Hello Koen,

    I tested the new z-Wave version (installation and reset of z-wave configuration). Unfortunately the scene event is not triggered. Could an exclusion and inclusions of the faulty devices (Fibaro motion and window sensor) help?
    fyi: I’m running my automation on a Raspberry

    Regards
    Michael

    en réponse à : Event with Fibaro Mension Sensor #11984
    Avatar
    LaplaceII
    Participant

    Thanks Koen for your recommendation,

    however, it would be good if the sceneevent works also with fibaro motion sensor. Do you have a clue why the sceneevent is not triggered?

    Meanwhile I included a fibaro window sensor 2 (inclusion without problems/associations to z-wave1 controller). Unfortunately I got also this “unhandled command class 0x60” which was already described in this thread. Do you have any advise how to handle this? I have everthing running on a raspberry pi. So, I’m not completly correct in this thread but problem seems to be independent from the plattform…

    2018-09-23 15:36:14.570 Detail, Node049, Received: 0x01, 0x13, 0x00, 0x04, 0x00, 0x31, 0x0d, 0x60, 0x0d, 0x00, 0x01, 0x71, 0x05, 0x00, 0x00, 0x00, 0xff, 0x06, 0x17, 0x00, 0x22
    2018-09-23 15:36:14.570 Detail,
    2018-09-23 15:36:14.570 Info, Node049, ApplicationCommandHandler – Unhandled Command Class 0x60

    Am I alone with these problems, someone else out there?
    Thanks in advance for your quick reply!
    Michael

    en réponse à : Ghosts in the system #11977
    Avatar
    LaplaceII
    Participant

    Hello,
    is the file eventscene.php a standard file within PS. If yes I don’t have it enventhough after a fresh install. How can I get this file for synology and raspberry?

    If it is userspecific my question is obsolet
    Thanks
    Michael

    en réponse à : Event with Fibaro Mension Sensor #11976
    Avatar
    LaplaceII
    Participant

    Hello Koen,
    Is there any solution for the device event?
    Thanks in advance for your quick answer!
    Michael

    en réponse à : Backup Raspberry #11974
    Avatar
    LaplaceII
    Participant

    Hello,
    Currently PS is not working with php7 only php5. For Raspberrys which are not linked to the jessie repository php5 cannot be installed by PS. Linking the jessie repository is described in the net.
    Furthermore it is important that all files in the ../PulseStation folder have www-data rights.
    If Backup service is not running properly create a folder /usr/share/PulseStationBackup
    Regards
    Michael

    en réponse à : Backup Raspberry #11965
    Avatar
    LaplaceII
    Participant

    Hi Koen,

    is there a slot to get in direct contact about Raspberry installation?

    Thanks
    Michael

    en réponse à : DSM 6.2 #11963
    Avatar
    LaplaceII
    Participant

    Hello Koen,

    all my blockly rules are strongly depending on the yahoo weather service. It tried several reinstalls (yahoo service itself, PulseStation, restart of NAS etc.). However, the yahoo weather service is still not working eventhough the service has a green checkmark. Have you encountered similar problems?

    What can I do that the weather data is updated again? Any advice?

    Regards
    Michael

    en réponse à : DSM 6.2 #11962
    Avatar
    LaplaceII
    Participant

    Hello Koen,
    I uninstalled PS before DSM6.2 (DS212+) installation. Afterwards I installed PS and used my PS backup. Seems that z-wave service incl. SceneService (Blockly), Pushover, Dashboard is working. However the yahoo weather service seems to have problems. Weather data is not updated. I tried already several things:
    – uninstall and reinstall of service did not help
    – deletion of locations does not work
    – add of new location does not work

    Do you have any advice? I still have to test ImperiHome service…
    Regards
    Michael

    en réponse à : DSM 6.2 #11955
    Avatar
    LaplaceII
    Participant

    Thanks för your Replay,
    Guess your new home(automation) is controlled by PS 😉
    Thanks for dsm 6.2 update!
    I’m interested to install PS in Raspberry 3b+…i’m not sure about installation due to new mariadb10 and php7 and use of backups…
    If this would work I’m open to donate…
    Active support from my side is due to my limited knowledge useless…sorry
    Regards
    Michael

    en réponse à : DSM 6.2 #11950
    Avatar
    LaplaceII
    Participant

    Hi,

    you’re totally right but if i look on the Security issues updating in dsm6.2 has to ne considered.
    Are Theres ans Plans to check PulseStations compability?

    In general i’m wondering a little bit about the activity in zur Forum. Quit low at the moment: some open questions, no news, live chat availability etc.

    Anything PulseStation users should Know-how?

    Regards Michael

    en réponse à : Backup Raspberry #11940
    Avatar
    LaplaceII
    Participant

    Hello Koen,

    would be great if we can get in contact to solve my problem. When do you have time for a remote meeting?

    Regards
    Michael

    en réponse à : ImperiHome not working #11917
    Avatar
    LaplaceII
    Participant

    Hi,
    I also got some years ago the Premium Account with one time Payment. Now I created an ImperiHome Account. Software still Works. You still can use the Software without paying a monthly fee.
    Regards
    Michael

    en réponse à : Backup Raspberry #11915
    Avatar
    LaplaceII
    Participant

    Hello Koen,

    any idea to solve my problem?
    I’m not sure if the following points are dependent to my problem. What I recognized is that the new raspberry versions install mariadb10 and php7. So the older versions (mariadb5 and php5) are not longer integrated in the stretch library (before jessie). Is that critical for the use of PulseStation on a raspberry?

    Regards
    Michael

    en réponse à : Aeon Labs USB Z-wave (gen5) working or not? #11914
    Avatar
    LaplaceII
    Participant

    Hello,

    has anyone a idea to solve my problem. I would really like to use the Aeon USB stick…

    Regards
    Michael

15 sujets de 1 à 15 (sur un total de 70)