Toutes mes réponses sur les forums
after the last update my Devolo heating devices are now supported. At the moment the devices lost their association to the z-Wave stick after 30 seconds. In the first 30 seconds I can sent commands to the devices and they accept it. What can I do to keep the connection up?
is it possible that you give me the link to Download the Betaversion? If you want can I give you Feedback about the Devolo, Fibaro Devices.
are you working on a new realease which containts some new devices like the fibaro heat control?
My devices are:
AEOTEC Z-Stick Gen5 (Remote)
Devolo Home Control (Thermostat Device)
Do you have shared a list of all supported devices?
yes the devices are battery powered.
If I go to the device settings in the “z-wave services” I can see a lot of – default – setting values, but if I want to change it, the devices fall back to the default value same like in the ImperiHome app. I guesss that the PulseStation – software don’t accept my changes and save my entries because of the node connection failure, it’s not a failure with the wake-up feature. I also guess that beacause of the node failure only a half of functionalities are actice. I can see the settings of the device and can see the current temperature, but I can’t sent commands to the device – only a one way connection.
- Cette réponse a été modifiée le il y a 4 années et 5 mois par MrMorgan.
yes I send it to the e-mail address info(at)pulse-station.com.
Please contact Mikael G. he wrote me yesterday, that he will take a look soon.
But if you want, I can sent you the e-mail twice to another adress.
cheersjanvier 21, 2016 à 1:10 en réponse à : Aeon Miniremote shows "Node failed" after successfully including #2503
I have the same problem.
After 10 seconds the device lost the node to the remote.
But, I also use the ImperiHome App on my Smartphone. There can I see all my devices and I get also the current temperature of all rooms. But I can’t set the temperature of the devices after 3 seconds they fall back to the default value “0”.
Can you please help me?