Existing Raspberry Pi installation?

Onze verontschuldigingen, dit bericht is alleen beschikbaar in het Amerikaans Engels. Voor het gemak van de kijker, is de inhoud hieronder weergegeven in de alternatieve taal. Je kunt klikken op de link om naar de actieve taal over te schakelen.

If you are currently running PulseStation on a Raspberry Pi, we have good news for you!Raspberry-pi-3

If you execute following commands, you will have following new features:
– Automatically allow z-wave usb key to be detected (no more permission errors)
– Automatically start PulseStation on reboot of your rpi

Interested in these improvements? Just execute following commands in the terminal or via ssh:

sudo usermod -a -G dialout www-data
wget --quiet - https://pulse-station.com/app/PulseStationRpiStartBoot.sh
sudo mv PulseStationRpiStartBoot.sh /etc/init.d/PulseStation
chmod +x /etc/init.d/PulseStation
sudo update-rc.d PulseStation defaults
sudo reboot

Enjoy!

Ps: I’ve also written an article about how to change the time (zone) on your raspberry pi, if the time in the logs is wrong:
https://www.pulse-station.com/ufaqs/rpi-wrong-time-timezone/