Reageer op: Port-porblems to connect synology and impery home

Gratis domotica Forums How can I …? Synology NAS Port-porblems to connect synology and impery home Reageer op: Port-porblems to connect synology and impery home

#901

K.Rens
Sleutelbeheerder

Hi,

If you open the url with port directly on your computer, are you able to see some information?

If I visit following url:
http://192.168.1.2:4070/
I get:
{“id” : “My Service”, “apiversion” : 1}

If you don’t get this, there are several options:
1) Verify the imperihome service is running under the services panel inside the administration.
2) Verify in the synology firewall that you fully allow port 4070.
3) If it then still does not work, it’s your router that is blocking this port.
You could try adding the ip of the nas to the DMZ (note: it will be accessible from outside of your network) or open up the port in the router settings.

If all this does not work, I could make a remote connection with your computer and try to sort it out step by step.

Kind regards,
K.Rens