Gratis domotica › Forums › Meld een bug › Aeotec Z-Stick not working with either USB-Port
- Dit onderwerp bevat 7 reacties, 4 deelnemers, en is laatst bijgewerkt op 5 jaren, 1 maand geleden door
Jodox.
-
AuteurBerichten
-
januari 9, 2016 om 4:34 am #2372
Jodox
BijdragerHello,
I tried the Aeotec Z-Stick Gen5 on my DS213+ with both USB ports /dev/ttyACM0 and /dev/ttyUSB0 but I always get logs like this:
2016-01-09 03:26:51.150 Always, OpenZwave Version 1.3.0 Starting Up
2016-01-09 03:26:51.150 Info, Setting Up Provided Network Key for Secure Communications
2016-01-09 03:26:51.151 Info, mgr, Added driver for controller /dev/ttyUSB0
2016-01-09 03:26:51.151 Info, Opening controller /dev/ttyUSB0
2016-01-09 03:26:51.151 Info, Trying to open serial port /dev/ttyUSB0 (attempt 1)
2016-01-09 03:26:51.151 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2016-01-09 03:26:51.151 Error, ERROR: Failed to open serial port /dev/ttyUSB0
2016-01-09 03:26:51.151 Warning, WARNING: Failed to init the controller (attempt 0)
2016-01-09 03:26:56.152 Info, Opening controller /dev/ttyUSB0
2016-01-09 03:26:56.152 Info, Trying to open serial port /dev/ttyUSB0 (attempt 1)
2016-01-09 03:26:56.152 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2016-01-09 03:26:56.152 Error, ERROR: Failed to open serial port /dev/ttyUSB0
2016-01-09 03:26:56.152 Warning, WARNING: Failed to init the controller (attempt 1)
2016-01-09 03:27:01.152 Info, Opening controller /dev/ttyUSB0
2016-01-09 03:27:01.152 Info, Trying to open serial port /dev/ttyUSB0 (attempt 1)
2016-01-09 03:27:01.152 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2016-01-09 03:27:01.153 Error, ERROR: Failed to open serial port /dev/ttyUSB0
2016-01-09 03:27:01.153 Warning, WARNING: Failed to init the controller (attempt 2)
2016-01-09 03:27:06.153 Info, Opening controller /dev/ttyUSB0
2016-01-09 03:27:06.153 Info, Trying to open serial port /dev/ttyUSB0 (attempt 1)
2016-01-09 03:27:06.153 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2016-01-09 03:27:06.153 Error, ERROR: Failed to open serial port /dev/ttyUSB0
2016-01-09 03:27:06.153 Warning, WARNING: Failed to init the controller (attempt 3)
2016-01-09 03:27:11.153 Info, Opening controller /dev/ttyUSB0
2016-01-09 03:27:11.153 Info, Trying to open serial port /dev/ttyUSB0 (attempt 1)
2016-01-09 03:27:11.153 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2016-01-09 03:27:11.154 Error, ERROR: Failed to open serial port /dev/ttyUSB0
2016-01-09 03:27:11.154 Warning, WARNING: Failed to init the controller (attempt 4)
2016-01-09 03:27:11.154 Detail, contrlr, Notification: DriverFailed
2016-01-09 03:27:11.154 Warning, WARNING: Tried to write driver config with no home ID set
2016-01-09 03:27:11.154 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x000000002016-01-09 03:33:02.947 Always, OpenZwave Version 1.3.0 Starting Up
2016-01-09 03:33:02.948 Info, Setting Up Provided Network Key for Secure Communications
2016-01-09 03:33:02.948 Info, mgr, Added driver for controller /dev/ttyACM0
2016-01-09 03:33:02.948 Info, Opening controller /dev/ttyACM0
2016-01-09 03:33:02.949 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-09 03:33:02.949 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-09 03:33:02.949 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-09 03:33:02.949 Warning, WARNING: Failed to init the controller (attempt 0)
2016-01-09 03:33:07.949 Info, Opening controller /dev/ttyACM0
2016-01-09 03:33:07.949 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-09 03:33:07.949 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-09 03:33:07.950 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-09 03:33:07.950 Warning, WARNING: Failed to init the controller (attempt 1)
2016-01-09 03:33:12.950 Info, Opening controller /dev/ttyACM0
2016-01-09 03:33:12.950 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-09 03:33:12.950 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-09 03:33:12.950 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-09 03:33:12.950 Warning, WARNING: Failed to init the controller (attempt 2)
2016-01-09 03:33:17.950 Info, Opening controller /dev/ttyACM0
2016-01-09 03:33:17.950 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-09 03:33:17.950 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-09 03:33:17.951 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-09 03:33:17.951 Warning, WARNING: Failed to init the controller (attempt 3)
2016-01-09 03:33:22.951 Info, Opening controller /dev/ttyACM0
2016-01-09 03:33:22.951 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2016-01-09 03:33:22.951 Error, ERROR: Cannot open serial port /dev/ttyACM0. Error code 2
2016-01-09 03:33:22.951 Error, ERROR: Failed to open serial port /dev/ttyACM0
2016-01-09 03:33:22.951 Warning, WARNING: Failed to init the controller (attempt 4)
2016-01-09 03:33:22.951 Detail, contrlr, Notification: DriverFailed
2016-01-09 03:33:22.951 Warning, WARNING: Tried to write driver config with no home ID set
2016-01-09 03:33:22.951 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0x00000000januari 9, 2016 om 10:01 am #2373Coyote
LidHi,
Maybe you can try with /dev/ttyACM1 (or /dev/ttyUSB1).
With my DS213j, I have to switch between ttyACM1 and ttyACM0 at each reboot of the NAS.
JMarc
januari 9, 2016 om 10:56 am #2374Jodox
BijdragerNo luck with both of your suggestions.
Jodox
januari 9, 2016 om 5:43 pm #2376Jodox
BijdragerAny other ideas?
Would be sad, if I don’t get this z-wave stick running with either Pulse Station or Domoticz. Does nobody have the same hardware and can give me some hints what to try?Jodox
januari 9, 2016 om 11:05 pm #2380Jodox
BijdragerDeleting and reinstalling the Z-Wave service several times did the trick.
(I hate it, when bugs are not logical… How do I know that I just have to do everything that failed before just a few more times for it to succeed?)Jodox
januari 10, 2016 om 1:24 am #2383K.Rens
SleutelbeheerderYou got error code 2.
In unix this means: file not found.So no clue what you did, but somehow it started finding the file.
Kind regards,
K.Rensjanuari 13, 2016 om 8:48 am #2419Mika
Sleutelbeheerderjanuari 13, 2016 om 10:43 pm #2430Jodox
Bijdrager@Mika: I had used /dev/ttyACM0, /dev/ttyACM1, /dev/ttyUSB0 and /dev/ttyUSB1 without any success. After I reinstalled the z-Wave service, everything is working fine with /dev/ttyACM0.
Greetings, Jost
-
AuteurBerichten
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.