Gratis domotica › Forums › Meld een bug › DSM Version 6 + Pulsestation Problem
- Dit onderwerp bevat 39 reacties, 15 deelnemers, en is laatst bijgewerkt op 4 jaren, 7 maanden geleden door
K.Rens.
-
AuteurBerichten
-
oktober 29, 2015 om 4:20 pm #1547
mate
BijdragerHi to all,
Since the upgrade of my synology DS212+ to DSM 6 I am not able to start Pulsestation in the paquet center … Thes status is STOPPED and not possible to activate ….
Has everybody the same problem and issue ?
Christian
oktober 30, 2015 om 6:49 am #1550Mika
SleutelbeheerderI didnt have the time to investigate DSM6 but I suppose that it’s a problem of compilation.
Maybe the toolchain has changed, I have to investigate that…Mika
oktober 30, 2015 om 9:30 am #1553coldbringer
BijdragerHey, I am having trouble also. The USB controller cannot be found, maybe they have renamed the USB ports? ttyACM0 is no longer correct. No results ttyS0 or ttyUSB0 either.
[ 0.000000] Kernel command line: root=/dev/md0 rw syno_hw_version=DS213pv10 c onsole=ttyS0,115200 ip=off ihd_num=2 netif_num=1 ip=off initrd=0x2000040,4M
[ 5.917048] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
[ 5.923754] console [ttyS0] enabled, bootconsole disabled
[ 5.934763] serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42) is a 16550A
[ 84.401299] cdc_acm 2-3:1.0: ttyACM0: USB ACM deviceoktober 30, 2015 om 10:03 am #1554coldbringer
BijdragerIn my case it’s not DSM6 but DSM 5.2-5644, automatic update of last night.
oktober 30, 2015 om 12:16 pm #1555RoyalTaz
BijdragerHello !
Me too, i’ve “ERROR: Failed to open serial port /dev/ttyACM0” on my DS110+ with 5.2-5644
I’ve removed PulseStation then reinstaller it, but no change.oktober 30, 2015 om 12:53 pm #1556Dave
BijdragerHallo,
have you tried to connect via SSH using Putty (as described herein: https://www.pulse-station.com/frequently-asked-questions/ under “How do I know my USB key is detected”) to get the right setup?oktober 30, 2015 om 1:05 pm #1557coldbringer
Bijdrageryup, i have posted my putty output above. looks like it should still be ttyACM0 (in theory)
oktober 30, 2015 om 1:12 pm #1558RoyalTaz
BijdragerMe too, i’ve the same things :
[ 1.350389] serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
[ 26.708953] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 306.184200] cdc_acm 1-1:1.0: ttyACM0: USB ACM deviceoktober 30, 2015 om 5:14 pm #1563coldbringer
BijdragerI have searched the Synology forums and found a guy who develops special USB drivers for Z-Wave sticks on Synology NAS systems. He even mentioned the support of the latest DSM version 5.2-5644. So now I am pretty sure it is a driver-related issue. Obviously, there is currently another issue that USB 3.0 harddisks on the USB 3.0 port work at USB 2.0 speed only.
I have installed the driver package but it didn’t help. Maybe you want to try it yourselves:
oktober 31, 2015 om 12:51 pm #1570RoyalTaz
BijdragerHello !
Mika have made an upgrade !
It’s the 1.2.2.
So, upgrade, reboot the Syno…and run 😉Rgds
oktober 31, 2015 om 1:17 pm #1572K.Rens
SleutelbeheerderHi, latest news:
1) Update DSM 5.2-5644
This one works with PulseStation.
If in the logs of Z-wave after the update you see “Error code 13”, you will have to grant access rights to the usb key again for PulseStation.
Execute following commands via ssh:
chmod 777 /dev/ttyACM0
chmod 777 /dev/ttyUSB02) DSM 6.0
There is no toolchain available yet to build the new drivers.
Once it’s available we can build compatible drivers.
So please wait a bit before installing it, just to be certain.Kind regards,
K.Rensnovember 2, 2015 om 2:01 pm #1606dartagnan
BijdragerHi
with DSM 6.0 Beta, I can’t add the repository, an error occurs : La connexion a echoué
if i remove the pulse repo the problem no longer occursThanks
november 30, 2015 om 12:06 pm #1972Mika
SleutelbeheerderHi All,
Looking for someone who is on DSM 6.
Have the necessary stuff to start it!Will start in the coming days…
I eventually need access to the NAS (ssh, folder ./web/PulseStation file filestation) to debug it…If someone is interested, feel free to contact me!
Mika.
februari 7, 2016 om 11:57 am #2667121an193
BijdragerHi,
Still looking for someone on DSM 6 (beta 2) ?
Laurent
Dieu est mort, Marx est mort et moi-même, je ne me sens pas très bien... (Woody Allen)
februari 7, 2016 om 2:19 pm #2672K.Rens
SleutelbeheerderYes, we are still looking for people on DSM 6 for helping us test whether our software works or not.
We can build a custom package for you if you are willing to help us, all we need to know is your NAS model.Kind regards,
K.Rens -
AuteurBerichten
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.