FGR222 invert up-down in imperihome

Gratis domotica Forums Feature requests FGR222 invert up-down in imperihome

Dit onderwerp bevat 5 reacties, heeft 3 stemmen, en is het laatst gewijzigd door  K.Rens 1 jaar, 12 maanden geleden.

6 berichten aan het bekijken - 1 tot 6 (van in totaal 6)
  • Auteur
    Berichten
  • #3726

    macgreg0r
    Bijdrager

    Is it possible to invert UP and Down button in imperihome service for a specified device (FGR222)?
    I don’t know if it’s my cabling that is wrong, but in Imperihome service up button is shutting the roller off and down is opening it.

    #3734

    djandib
    Bijdrager

    Hi,
    I think you cabling is wrong. Just turn around the 2 cables which lead from the FGR222 to the shutter.
    I have 5 of them in use and all work fine.

    #3738

    macgreg0r
    Bijdrager

    hello,

    I know that I can invert cables, but I have 7 FGR-222 and those are in walls behind manual switchs, and realy hard to access, and specialy hard to remount…
    I’d like to invert commands logicaly to same me time to unmount a remont all modules.

    #3743

    djandib
    Bijdrager

    Maybe you can work only with level.
    Normal: 99-> Open.
    So don`t use the switch OPEN, but new level=1

    Possible?

    #3752

    macgreg0r
    Bijdrager

    I’m using level 100% = close and 0% = Open for me.
    the thing that is anoying is that imperihome icon is open when close and close when open.
    Plus button up and down inverted…
    I wich I could logicaly invert imperihome display, like add a logical “not”.

    #3753

    K.Rens
    Sleutelbeheerder

    I totally agree it would be nice, but it would be quite some development for fixing wrong wiring…
    You could use custom icons inside Imperihome or use scenes for it. But I agree it’s not nice…

    Kind regards,
    K.Rens

6 berichten aan het bekijken - 1 tot 6 (van in totaal 6)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.