[Support request] Fibaro RGB Controller collor change

Gratis domotica Forums Meld een bug Fibaro RGB Controller collor change

Dit onderwerp bevat 2 reacties, heeft 2 stemmen, en is het laatst gewijzigd door  A1uca2d 2 jaren, 2 maanden geleden.

3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)
  • Auteur
    Berichten
  • #3658

    A1uca2d
    Bijdrager

    Hey,

    I have some configuration problems with my new Fibaro RGBW Controller. Behind them I have RGB light strips … Now I have set up some Scenes to Change the color of them. But After a short time the color changes from the choosen one over White to blue and the brightness changes too.

    the next one: sometimes after I turne the lights of, the turn on again.

    can anyone help, please?

    #3659
    Miss Laura
    Miss Laura
    Moderator

    Lights turn on themselves after some time:
    – Check the associations tab of your rgbw device in zwave. Maybe it’s linked to another device?
    – Check all your blocky scenes, maybe one of them is triggering the device to go on again.

    It’s very strange the color changes automatically.
    Does it change only once, or it keeps on changing?
    There must be some device or scene firing this action, it should never do this itself.
    Check the 2 lines mentioned above, especially the associations.

    Have fun,
    Laura

    #3660

    A1uca2d
    Bijdrager

    You’r right it’s very strange. …

    I’ve found my mistake.
    I’ve forgot to set the “run Scene manually” block in the scene.

    Now everything runs fine.

3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.