How to link a scene with a Virtual Device of type "Binary Switch"

Gratis domotica Forums How can I …? Synology NAS How to link a scene with a Virtual Device of type "Binary Switch"

Dit onderwerp bevat 3 reacties, heeft 3 stemmen, en is het laatst gewijzigd door  yan.pelletier 2 jaren, 8 maanden geleden.

4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)
  • Auteur
    Berichten
  • #2846

    yan.pelletier
    Bijdrager

    Hello,

    When I create a virtual device of type “Binary Switch”, there is no “Event” block generated in blocky like there is when I create a virtual device of type “LOV”.

    Is this by design or a bug?

    I would like to create a scene to be run when a change switch position of a virtual device of type binary switch, but I’m not able since there is no “Event” block. I con only do this when I create a LOV device with 2 values (on/off).

    Thank you!

    #2856

    K.Rens
    Sleutelbeheerder

    I have the same issue.
    It has not been designed like this.

    For now you need to use the LOV for this.
    Virtual Binary Switch has no events.

    Kind regards,
    K.Rens

    #2990
    Mika
    Mika
    Sleutelbeheerder

    It was a request from Koen since a long time but since he was the only one, I didnt implement it. Now you are 2…I’ll did it!
    => Put it in the todo list

    #3005

    yan.pelletier
    Bijdrager

    Thank you!

4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.