Imperihome doesn't find Greenwave devices

Gratis domotica Forums How can I …? Android / iOS / Windows Phone Imperihome doesn't find Greenwave devices

Tags: ,

Dit onderwerp bevat 6 reacties, heeft 2 stemmen, en is het laatst gewijzigd door  hgravatar 2 jaren, 3 maanden geleden.

7 berichten aan het bekijken - 1 tot 7 (van in totaal 7)
  • Auteur
    Berichten
  • #2199

    hgravatar
    Bijdrager

    I’ve installed the Imperihome app on my iPhone. And adding the Imperihome Standard System works. It even does it without supplying my login and password. Is that correct?

    Then I want to add my GreenWave Powernodes. However, when I want to add it to my Dashboard by choosing a device widget, it doesn’t show any devices. How do I solve this?

    Any help appreciated.

    Henri

    #2205

    K.Rens
    Sleutelbeheerder

    For android imperihome should only work when you provide credentials.
    Very strange, we will investigate this.

    Do you see the greenwave devices in the list of devices inside imperihome?
    (Do a refresh first).
    If not: inside pulsestation, in advanced settings of imperihome, you can choose to send more devices to Imperihome.

    Kind regards,
    K.Rens

    #2208

    hgravatar
    Bijdrager

    I thought it was strange that I could just connect to the service on iOS without my credentials. Just let us know what you find out.

    I got it working. I didn’t provide a name for the device on the Zwave service page. As soon as I did that it started working. However, when I add a location on that page, it disappears from the ImperiHome again. Should it do that?

    #2249

    K.Rens
    Sleutelbeheerder

    It should not disappear.
    Did you try swiping left/right inside imperihome to move between your rooms?

    Fyi: please be clear inside imperihome. They have a dashboard view and a list view.
    I am talking about the list view.

    Kind regards,
    K.Rens

    #2263

    hgravatar
    Bijdrager

    You’re right, it appeared on a different page. I do have a lot of empty pages though in list view from Imperihome. Why does Pulsestation create those? I just have 2 switches, 2 camera’s, a controller, yahoo weather service and a scene (blocky) running. In Imperihome I start with three empty pages, than one camera (setup as a different system), the weather, an empty page, the 2 switches on 1 page, and finally the blockly on 1 page. Are the three pages the controller and the 2 virtual devices (camera’s)? What is the fourth page then?

    #2265

    K.Rens
    Sleutelbeheerder

    I would need screenshots.
    But for every location there is a page.

    Scenes have a specific page
    Camera’s have a specific page
    And an empty page is probably because some device has an empty location.

    Kind regards,
    K.Rens

    #2272

    hgravatar
    Bijdrager

    I added for all devices a location. In PulseStation dashboard interface it shows correctly. All locations are displayed with the correct devices. In Perihome however I still see various empty pages in list view. All locations are mentioned including extra because of the camera system which was added separately.

7 berichten aan het bekijken - 1 tot 7 (van in totaal 7)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.