ImperiHome support for Danfoss LC-13

Gratis domotica Forums Feature requests ImperiHome support for Danfoss LC-13

Dit onderwerp bevat 4 reacties, heeft 4 stemmen, en is het laatst gewijzigd door  uwerner 2 jaren, 4 maanden geleden.

5 berichten aan het bekijken - 1 tot 5 (van in totaal 5)
  • Auteur
    Berichten
  • #953

    Kiet79
    Bijdrager

    Can you please add ImperiHome support for the Danfoss LC-13 you sell in your shop? I managed to see my 3 Thermostates in ImperiHome (adding Setpoint Thermostate to the list of the plugin) but I cannot see or manipulate the temperature. Many thanks.

    #957
    Mika
    Mika
    Sleutelbeheerder

    I put it in the todo list.
    For the Imperihome Service, I have to add manually the devices.

    Mikael

    #3556

    uwerner
    Bijdrager

    Are the Danfoss LC-13 now supported? With the HomeSeer Imperihome plugin, I cant set the setpoint values. I checked it also with Fibaro HC2 but no LC-13 setpoint appears. I used the latest Imperihome 2.8.1.

    I think the Danfoss LC-13 Z-Wave radiator thermostat are the most popular ones at least in Europe. Would be well worth to support them.

    #3557
    Miss Laura
    Miss Laura
    Moderator

    Hi,

    I do not have this device, so I cannot test it, nor add it to Imperihome myself until I have one.
    You could try adding it inside the advanced parameters of the imperihome service in the administration panel.
    If you add the correct string, it might work.

    Have fun,
    Laura

    #3558

    uwerner
    Bijdrager

    ok and many thanks for the response!

5 berichten aan het bekijken - 1 tot 5 (van in totaal 5)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.