september 25, 2015 om 11:58 am #1287
I integrated the Fibaro Roller Shutter (v02) into the PulseStation and generated a panel to drive my venetian blinds up and down. Works fine!
I’m just wondering about how I can adjust the angle of the lamellas of the venetian blinds?:
1. Which panel is the right one to set the angle for the lamellas? If there is one, which parameters do I have to adress/adjust?
2. Is there a chance to generate a panel which ist able to drive the blinds completely/partly up and down (like dimmer panel) in combination with a lamella angle positioning (e.g. in %)?
3. Is this possible in the ImperiHome Application?
Lot of questions…but I found nothing to i in this forum…
Thanks in advance for you response!
LaplaceIIseptember 25, 2015 om 2:05 pm #1288
it’s the first time I heard someone using it with lamellas…
If you can give me which property I need to integrate, I’ll create a specific panel for you.
For Imperihome, I dont think it’s possible (for the moment) to integrate the lamellas.
I’ll take a look into their API to what it’s possible to do.
Mikaseptember 29, 2015 om 9:38 pm #1329
sorry for may late reply…
For me the perfect panel for venetian blinds should have;
– two arrows (one for up and one for down)
– a pause button
– a text field for the percentage of covered window by venetian blind
– a slider (like the dimmer panel) to set the lamella angle of the roller blind. The parameter behind it could be time depended.
Hope this helps….
I would be very thankful ist such a panel would be provided.
e.g. in the Fibaro Home Center it is integrated…september 30, 2015 om 9:06 am #1331
I put it on my todo list but for the next few days I’ll have less time for personnal reason…december 21, 2015 om 9:37 am #2160
thanks for the new 1.3 version of PulseStation! Works fine so far!
I’m just wondering if it is now possbile to set the lamella angle for my venetian blinds (see our previous conversation)?
Would be great to hear from you!
LaplaceIIdecember 21, 2015 om 9:49 am #2161
Right I didnt forget that.
Now I’ll just take some days for the end of the years and then I’ll look at your panel.
Will take a look of what fibaro propose just to see…januari 1, 2016 om 3:48 pm #2285
Can you tell me how you manage your lamella actually ?
Which property determine the lamella angle ?
For the moment, the slider allow you to open your venitian bling at a certain level ?
What is missing, only the lamella angle ? (the start/stop can be done by determine a certain level)januari 2, 2016 om 11:16 pm #2318
sorry had some days off…
Currently I’m not able to control the lamella angle. I saw the possibility in the manual of the fibaro roller shutter (http://www.fibaro.com/manuals/de/FGRM-222/FGRM-222-DE-A-v1.00.pdf see first page fifth columm).
I guess the lamella angle can be controlled by time. I already tried to do so with the extended command list of the roller shutter within pulsestation. Without success…might be my fault…
Setting the level is no problem…
Looking foward for your answer!
LaplaceIImaart 16, 2016 om 11:39 am #2967
just wondering how my request is developing.
I’m totally unsecure which parameter is determining the lamella angle. I just saw that this is possible in the Fibaro Home Center. For me there are still some parameters unclear.
In the Tab2 (see attachm.) of the Fibaro Roller Shutter Properties there are some parameters which could play a role:
– Dimmning Duration
– Step Sie
– Button Inc and Dec (Inclination? and Declination?)
Perhaps also Tab4 could help. Parameters:
– Roller Shutter operating modes
– In Venetian Blind mode the parameter determines time of full turn of the lamellas
However if I creat a blockly rule I tried to controll the lamella angle with the parameter Switch (set to true or false). I tried to program it time dependend, but the smallest unit in the block time is 1 second. This is to high for a lamella angle setting.
Do you have a proposal?
–maart 16, 2016 om 11:54 am #2968
Sorry, how can I add an attachment?januari 16, 2018 om 11:17 am #11821
how is the status of the request? Would be interesting to know if there will be a solution from your site!?
Michaeljanuari 26, 2018 om 12:46 pm #11831djandibBijdrager
as I understand Mika isn`t here for a long time.
I try to understand your problem:
You want to steer the position of the lamella angels. so Shutter is DOWN (Dark) and just turn the slats a little bit for getting more light.
The parameter open/close I think is only for complete open or close.
I have 6 of the ShutterControls, but work only with the “level”.
I cannot test my suggestions, but I would say:
Parameter 10: 2 Venetian Blind Mode, with positioning
Parameter 12: Default 150 -> In Venetian Blind mode (parameter 10 set to 2) the parameter determines time of full turn of the slats
Andifebruari 12, 2018 om 11:31 pm #11840
I played a little with the parameter. Influence on lamella angle is given. Thanks for your hint!
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.