need to activate blockly?

Gratis domotica Forums How can I …? Synology NAS need to activate blockly?

4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)
  • Auteur
    Berichten
  • #4095
    Avatarbambuz
    Bijdrager

    I tried to create a simple scene with the motion sensor – trigger when movement is detected. None of the automated scene triggers work. Not only with the motion sensor. Turn switch on at 10:00 for example does not work either.
    Do I have to activate blockly first?
    The services core, scene, zwave and database are running. 3 devices are installed, the switch works fine manually.

    #4107
    Avatardjandib
    Bijdrager

    HI bambuz,
    no, it doesn`t has to start.
    – Try to “deactivate” all your scenes by adding a “Run blockly manually”
    – make a new Scene “Add log”+Text modul”******** Test” and save it.
    – wait one minute
    – take a look at the scene log.

    Do you see the “******** Test” in the log-File?

    Andi

    #4111
    Miss LauraMiss Laura
    Moderator

    Or contact us via the live chat.
    Probably you are not using the device event block.
    Check out our examples in the faq.

    Have fun,
    Laura

    #4122
    Avatarbambuz
    Bijdrager

    Thanks for the replies. After several test and restarts of the servicec it is working now, don´t ask why. But one problem left. When the motion sensor fires, pulsstation does not always detect it. And sometimes there is a delay of 10 seconds or more. Or the switch turns on and two seconds later off. Really funny behavior. Do you have a solution for that?

4 berichten aan het bekijken - 1 tot 4 (van in totaal 4)
  • Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.