oktober 24, 2015 om 12:19 pm #1491
i try to set up my system but i have some difficulties. The general setup was not a problem, but for example changing settings of my Fibaro motion sensor or Danfoss Living connect makes me lot of problems.
I move to services/z-wave/click on editing/settings, change the settings and click on ok. But the settings weren’t saved. So when i reopen the settings i find all the standard settings again. This happens with my Fibaro and my Danfoss.
I tried to change the settings here: web\PulseStation\data\zwcfg_0xf2b94053.xml. But After changing them some of the settings change back to the original value. For example i can’t change the current Day on the Danfoss or change the current hour and minute.
On “https://www.pulse-station.com/forums/topic/danfoss-live-connect/” you write Pulsestation generates panels on its own. But when I follow your instruction nothing ist going to happen. There are no automatically generated panels.
Currently I can’t open any Graphics. I only see Loading database’s data without any end.
Can you please help me?oktober 24, 2015 om 12:47 pm #1492
It sounds like you did not install MariaDB inside your synology?
Can you try installing this package first?
It stores parameters until your device picks it up, it’s needed to store data that will be shown in the graph’s, …
You can best also install the database service from the store and link it to the database.
Then it can store your graph data.
K.Rensoktober 24, 2015 om 1:00 pm #1493
MariaDB is already installed and I use the root user for PulseStation.oktober 24, 2015 om 1:41 pm #1494
Okay after editing the Port in my Synology the Graphics are available. But the other Problems stay the same.oktober 24, 2015 om 10:00 pm #1501
For parameter changes I also have to wait about one hour for devices without a battery and about 24 hours for wake-up devices (with battery) before they are actually updated.
But that’s quite normal, no?
You can speed up the learning of new parameters a bit by waking up the devices a few times, eg by pressing the button 3 times.
K.Rensoktober 25, 2015 om 12:05 am #1503
Oh well, Dave’s problems sound all too familiar to me. Same here: When I make changes to the parameters of my Fibaro Smoke Sensors they will be ignored. Not a single change has ever worked here – despite waiting for days, making sure the device has been awake (log-file) and having the MariaDB-Package on the diskstation. I think there is a general issue behind this symptom.oktober 25, 2015 om 7:47 am #1507
I’m busy with the updating of the Zwave Service and especially the OpenZwave library.
Wait for the next release…oktober 25, 2015 om 6:33 pm #1515
Thanks!februari 12, 2016 om 9:56 pm #2712
should fix the latest version of PulseStation this “device – update – problem”? Because my problems are still exist. I can’t change for example the date on my Danfoss Living connect 13
Renéfebruari 12, 2016 om 10:38 pm #2714
We don’t have a danfoss living connect 13, so we cannot test it.
But the smoke sensor parameters have been tested and are working for me in the latest beta.
As far as I know, it’s supposed to be released soon.
K.Rensmaart 11, 2016 om 9:40 am #2957
But I bought a danfoss living connect 13 in the pulse-station shop?! I thought you support the products you sell?
It is still not possible to change the time or date, but I could change the wacke up time. So I hope to reduce the battery consumption. The danfoss LC13 needs more then 20% battery power once a month.
Renémaart 18, 2016 om 9:19 pm #2983
Dont know why you cannot change the wake up interval. Maybe a bug in the openzwave library.
But believe me, 20% in a month is not so bad. It means that your battery will work for 5 month which is “normal” for zwave device.
Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.