raspberry pi zero

Gratis domotica Forums How can I …? Raspberry Pi raspberry pi zero

Dit onderwerp bevat 2 reacties, heeft 2 stemmen, en is het laatst gewijzigd door  RoyalTaz 3 jaren, 1 maand geleden.

3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)
  • Auteur
  • #2415


    Hello !

    Is Raspberry zero compatible with PulseStation ?

    Best rgds



    It looks like it will probably work, but keep in mind following things:
    – If you want to control z-wave, enocean or anything else that needs a USB dongle, you will need to have a connector from micro usb to usb.
    – The device is very slow, so do not run a lot of PulseStation services on it. The basics should work, just don’t overload it.
    – Use the queuing system, commands may not get executed right away, but once the system has resources available

    It should work, but quite slow, don’t overload it.
    I would not buy it myself, but rather a really good raspberry pi (newer model) that is definitely fast and will last for several years.

    Kind regards,



    Ok, that’s what I thought.
    It’s more safe to take the Raspberry V2.


3 berichten aan het bekijken - 1 tot 3 (van in totaal 3)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.