Gratis domotica › Forums › How can I …? › Raspberry Pi › Set Temp. on Danfoss LC-13 HeatingThermostat
- Dit onderwerp bevat 6 reacties, 3 deelnemers, en is laatst bijgewerkt op 4 jaren, 2 maanden geleden door
Polliny.
-
AuteurBerichten
-
november 8, 2016 om 3:04 pm #3845
Polliny
BijdragerHello all,
i connect the Danfoss thermostat to my PluseStation via zwave (on Raspberry Pi). Add it to the Dashboard as “Simple Value” and see the current temp. that was set by me on the tehrmostat.
But now i want change the temp. over the PulseStattion.
What kind of panel i have to creat? And what value i musst change ?november 9, 2016 om 4:57 pm #3852Miss Laura
ModeratorDid you already try deleting the panel and generating it automatically.
Usually it creates the correct panels, with options to change the temperature.Have fun,
Lauranovember 11, 2016 om 10:36 am #3862Polliny
BijdragerThank you.
I tried it, but nothing will be created for the thermostat.Can i help you to understand my problem, with more infomration that you need?
november 12, 2016 om 12:17 am #3875K.Rens
SleutelbeheerderI just launched the latest version of the zwave library.
Can you try updating it, clearing the config file (not reset the zwave stick)?Maybe then the parameters are a bit more clear.
Once we know the parameter, we can develop a panel for it.
We could reuse parts of the Nest thermostat panel for instance.
For now you could control it via for Instance Imperihome or by creating a blocky scene that increases the temperature if your activate it inside the dashboard.I do not have that hardware, so I cannot test it, nor is it easy to develop panels for it. 🙁
Kind regards,
K.Rensnovember 13, 2016 om 10:18 pm #3882Polliny
BijdragerHi,
i update the zwave library and clear the config. The panel will dont created.
I send you some information about this device, maybe this helps.
Can youn give me an example for a blocky scene, how it could that look.
Thank YOU!
Pics:
Services/Zwave
Device Page1
Device Page2
Device Page3
Device Page4
Device Page5november 13, 2016 om 10:58 pm #3885Polliny
Bijdrageri try to create an bloky scene but i have a problem to increase the value. because i cant finde the right operator, and the second problem ist how i can allocate the scene to a panel?
-
Deze reactie is gewijzigd 4 jaren, 2 maanden geleden door
Polliny.
november 14, 2016 om 12:02 am #3887Polliny
Bijdragersorry for all this questions and reports. But i want finished my Projekt 🙂
I try to modify the property(Heating 1) via the zwave service, but the thermostat dont confirm the new value.2016-11-13 22:05:54.189 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:05:54.190 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x51, 0xab 2016-11-13 22:05:54.206 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x52, 0xd7 2016-11-13 22:05:54.206 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:05:54.206 Detail, Node005, Removing current message 2016-11-13 22:05:54.207 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:05:54.207 Detail, Node005, Removing current message 2016-11-13 22:06:07.867 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:06:07.868 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x53, 0xa9 2016-11-13 22:06:07.869 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x54, 0xd1 2016-11-13 22:06:07.875 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:06:07.875 Detail, Node005, Removing current message 2016-11-13 22:06:07.876 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:06:07.876 Detail, Node005, Removing current message 2016-11-13 22:06:32.398 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:06:32.399 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x55, 0xaf 2016-11-13 22:06:32.400 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x56, 0xd3 2016-11-13 22:06:32.400 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:06:32.401 Detail, Node005, Removing current message 2016-11-13 22:06:32.401 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:06:32.402 Detail, Node005, Removing current message 2016-11-13 22:07:06.672 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:07:06.673 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x57, 0xad 2016-11-13 22:07:06.706 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x58, 0xdd 2016-11-13 22:07:06.706 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:07:06.706 Detail, Node005, Removing current message 2016-11-13 22:07:06.707 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:07:06.707 Detail, Node005, Removing current message 2016-11-13 22:07:31.909 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:07:31.916 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x59, 0xa3 2016-11-13 22:07:31.916 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x5a, 0xdf 2016-11-13 22:07:31.917 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:07:31.917 Detail, Node005, Removing current message 2016-11-13 22:07:31.918 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:07:31.918 Detail, Node005, Removing current message 2016-11-13 22:08:05.940 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:08:05.940 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x5b, 0xa1 2016-11-13 22:08:05.956 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x5c, 0xd9 2016-11-13 22:08:05.956 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:08:05.956 Detail, Node005, Removing current message 2016-11-13 22:08:05.957 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:08:05.957 Detail, Node005, Removing current message 2016-11-13 22:08:31.689 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:08:31.689 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x5d, 0xa7 2016-11-13 22:08:31.690 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x5e, 0xdb 2016-11-13 22:08:31.691 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:08:31.691 Detail, Node005, Removing current message 2016-11-13 22:08:31.691 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:08:31.692 Detail, Node005, Removing current message 2016-11-13 22:09:10.823 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:09:10.823 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x5f, 0xa5 2016-11-13 22:09:10.825 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x60, 0xe5 2016-11-13 22:09:10.828 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:09:10.828 Detail, Node005, Removing current message 2016-11-13 22:09:10.829 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:09:10.829 Detail, Node005, Removing current message 2016-11-13 22:09:32.301 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:09:32.302 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x61, 0x9b 2016-11-13 22:09:32.315 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x62, 0xe7 2016-11-13 22:09:32.316 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:09:32.316 Detail, Node005, Removing current message 2016-11-13 22:09:32.317 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:09:32.317 Detail, Node005, Removing current message 2016-11-13 22:10:07.579 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:10:07.580 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x63, 0x99 2016-11-13 22:10:07.645 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x64, 0xe1 2016-11-13 22:10:07.646 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:10:07.646 Detail, Node005, Removing current message 2016-11-13 22:10:07.647 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:10:07.647 Detail, Node005, Removing current message 2016-11-13 22:10:31.967 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:10:31.967 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x65, 0x9f 2016-11-13 22:10:31.976 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x66, 0xe3 2016-11-13 22:10:31.976 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:10:31.977 Detail, Node005, Removing current message 2016-11-13 22:10:31.977 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:10:31.977 Detail, Node005, Removing current message 2016-11-13 22:10:59.085 Detail, Node005, Queuing (Controller) Has Node Failed 2016-11-13 22:10:59.090 Info, Requesting whether node 5 has failed 2016-11-13 22:10:59.090 Detail, contrlr, Queuing (Command) ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x05, 0x9c 2016-11-13 22:10:59.091 Detail, Notification: ControllerComand - Starting 2016-11-13 22:10:59.296 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:11:01.504 Detail, 2016-11-13 22:11:01.505 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x62) - ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x05, 0x9c 2016-11-13 22:11:01.509 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x62, 0x01, 0x99 2016-11-13 22:11:01.509 Detail, 2016-11-13 22:11:01.515 Warning, Node005, WARNING: Received reply to FUNC_ID_ZW_IS_FAILED_NODE_ID - node 5 failed 2016-11-13 22:11:01.516 Error, Node005, ERROR: node presumed dead 2016-11-13 22:11:01.516 Detail, Node153, Expected reply was received 2016-11-13 22:11:01.516 Detail, Node153, Message transaction complete 2016-11-13 22:11:01.517 Detail, 2016-11-13 22:11:01.517 Detail, contrlr, Removing current message 2016-11-13 22:11:01.517 Detail, Node005, Notification: Notification - Node Dead 2016-11-13 22:11:01.728 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:11:07.426 Detail, Notification: ControllerCommand - NodeFailed 2016-11-13 22:11:07.978 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:11:10.256 Info, Node005, Value::Set - COMMAND_CLASS_THERMOSTAT_SETPOINT - Heating 1 - 1 - 1 - 21 2016-11-13 22:11:10.257 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Set (Node=5): 0x01, 0x0d, 0x00, 0x13, 0x05, 0x06, 0x43, 0x01, 0x01, 0x42, 0x08, 0x34, 0x25, 0x67, 0x9d 2016-11-13 22:11:10.257 Detail, Node005, Queuing (Send) ThermostatSetpointCmd_Get (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x43, 0x02, 0x01, 0x25, 0x68, 0xed 2016-11-13 22:11:15.678 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:11:15.678 Detail, Node005, Removing current message 2016-11-13 22:11:15.679 Error, Node005, ERROR: Dropping command because node is presumed dead 2016-11-13 22:11:15.679 Detail, Node005, Removing current message 2016-11-13 22:11:28.817 Detail, Node005, Queuing (Controller) Has Node Failed 2016-11-13 22:11:28.818 Info, Requesting whether node 5 has failed 2016-11-13 22:11:28.818 Detail, contrlr, Queuing (Command) ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x05, 0x9c 2016-11-13 22:11:28.819 Detail, Notification: ControllerComand - Starting 2016-11-13 22:11:29.010 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:11:30.167 Detail, 2016-11-13 22:11:30.168 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x62) - ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x05, 0x9c 2016-11-13 22:11:30.172 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x62, 0x01, 0x99 2016-11-13 22:11:30.172 Detail, 2016-11-13 22:11:30.173 Warning, Node005, WARNING: Received reply to FUNC_ID_ZW_IS_FAILED_NODE_ID - node 5 failed 2016-11-13 22:11:30.173 Error, Node005, ERROR: node presumed dead 2016-11-13 22:11:30.173 Detail, Node153, Expected reply was received 2016-11-13 22:11:30.174 Detail, Node153, Message transaction complete 2016-11-13 22:11:30.174 Detail, 2016-11-13 22:11:30.174 Detail, contrlr, Removing current message 2016-11-13 22:11:30.175 Detail, Node005, Notification: Notification - Node Dead 2016-11-13 22:11:30.227 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:11:31.204 Detail, Notification: ControllerCommand - NodeFailed 2016-11-13 22:11:31.306 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:16:44.893 Detail, Node005, Received: 0x01, 0x09, 0x00, 0x04, 0x00, 0x05, 0x03, 0x80, 0x03, 0x3c, 0x4b 2016-11-13 22:16:44.893 Detail, 2016-11-13 22:16:44.894 Error, Node005, WARNING: node revived 2016-11-13 22:16:44.894 Info, Node005, Received Battery report from node 5: level=60 2016-11-13 22:16:44.894 Detail, Node005, Refreshed Value: old value=60, new value=60, type=byte 2016-11-13 22:16:44.895 Detail, Node005, Changes to this value are not verified 2016-11-13 22:16:44.895 Detail, Node005, Notification: Notification - Node Alive 2016-11-13 22:16:44.948 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:16:46.356 Detail, Node005, Notification: ValueChanged 2016-11-13 22:16:47.383 Info, Notification: Value Changed - Add DB Record for device id zwave-5 and value id 128-user-byte-1-0 2016-11-13 22:16:47.478 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:16:48.966 Detail, Node005, Received: 0x01, 0x0c, 0x00, 0x04, 0x00, 0x05, 0x06, 0x43, 0x03, 0x01, 0x42, 0x08, 0xca, 0x35 2016-11-13 22:16:48.967 Detail, 2016-11-13 22:16:48.968 Detail, Node005, Refreshed Value: old value=22.50, new value=22.50, type=decimal 2016-11-13 22:16:48.969 Detail, Node005, Changes to this value are not verified 2016-11-13 22:16:48.969 Info, Node005, Received thermostat setpoint report: Setpoint Heating 1 = 22.50C 2016-11-13 22:16:48.970 Detail, Node005, Notification: ValueChanged 2016-11-13 22:16:50.041 Info, Notification: Value Changed - Add DB Record for device id zwave-5 and value id 67-user-decimal-1-1 2016-11-13 22:16:50.142 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:16:51.648 Detail, Node005, Received: 0x01, 0x0c, 0x00, 0x04, 0x00, 0x05, 0x06, 0x43, 0x03, 0x01, 0x42, 0x08, 0xca, 0x35 2016-11-13 22:16:51.649 Detail, 2016-11-13 22:16:51.649 Detail, Node005, Refreshed Value: old value=22.50, new value=22.50, type=decimal 2016-11-13 22:16:51.650 Detail, Node005, Changes to this value are not verified 2016-11-13 22:16:51.650 Info, Node005, Received thermostat setpoint report: Setpoint Heating 1 = 22.50C 2016-11-13 22:16:51.651 Detail, Node005, Notification: ValueChanged 2016-11-13 22:16:53.421 Info, Notification: Value Changed - Add DB Record for device id zwave-5 and value id 67-user-decimal-1-1 2016-11-13 22:16:53.528 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:16:55.207 Detail, Node005, Received: 0x01, 0x0c, 0x00, 0x04, 0x00, 0x05, 0x06, 0x43, 0x03, 0x01, 0x42, 0x08, 0xca, 0x35 2016-11-13 22:16:55.208 Detail, 2016-11-13 22:16:55.208 Detail, Node005, Refreshed Value: old value=22.50, new value=22.50, type=decimal 2016-11-13 22:16:55.209 Detail, Node005, Changes to this value are not verified 2016-11-13 22:16:55.209 Info, Node005, Received thermostat setpoint report: Setpoint Heating 1 = 22.50C 2016-11-13 22:16:55.210 Detail, Node005, Notification: ValueChanged 2016-11-13 22:16:57.196 Info, Notification: Value Changed - Add DB Record for device id zwave-5 and value id 67-user-decimal-1-1 2016-11-13 22:16:57.403 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:17:00.999 Detail, Node005, Received: 0x01, 0x0c, 0x00, 0x04, 0x00, 0x05, 0x06, 0x43, 0x03, 0x01, 0x42, 0x08, 0xca, 0x35 2016-11-13 22:17:00.999 Detail, 2016-11-13 22:17:01.000 Detail, Node005, Refreshed Value: old value=22.50, new value=22.50, type=decimal 2016-11-13 22:17:01.001 Detail, Node005, Changes to this value are not verified 2016-11-13 22:17:01.001 Info, Node005, Received thermostat setpoint report: Setpoint Heating 1 = 22.50C 2016-11-13 22:17:01.002 Detail, Node005, Notification: ValueChanged 2016-11-13 22:17:04.350 Info, Notification: Value Changed - Add DB Record for device id zwave-5 and value id 67-user-decimal-1-1 2016-11-13 22:17:04.570 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xd6ac8854 2016-11-13 22:17:09.086 Detail, Node005, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x05, 0x04, 0x46, 0x08, 0x00, 0x7f, 0xc1
-
Deze reactie is gewijzigd 4 jaren, 2 maanden geleden door
Polliny.
-
Deze reactie is gewijzigd 4 jaren, 2 maanden geleden door
-
AuteurBerichten
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.