Simple Scene with Blockly

[cartmanBijdrager]

Hello,

Is someone could tell me where i’m wrong ?

My setup :
DSM Pulse Station Package 1.3.0
PulseStation URL : http://192.168.0.113/PulseStation
Service core port : 4020

If i run this url, the ZWAVE switch (number 4) turns ON
http://192.168.0.113:4020/message=1|scene|zwave|UPDATEPROPERTY|zwave-4|37-user-bool-3-0|true

If i make a scene with one button panel to turn ON the switch it does nothing.

This is how i setup my scene under Blockly (with several ZWAVE Switch):
Blockly

My dashboard :
Dash1

Dash2

• Dit onderwerp is gewijzigd 2 jaren, 9 maanden geleden door  cartman.
• Dit onderwerp is gewijzigd 2 jaren, 9 maanden geleden door  cartman.
• Dit onderwerp is gewijzigd 2 jaren, 9 maanden geleden door  cartman.

[K.RensSleutelbeheerder]

What is precisely the problem?

The button does not run the scene?
In that case, delete your manually added panel and use the generate panels button.
It will create the correct panel for running your scene. 🙂

Kind regards,
K.Rens

[MikaSleutelbeheerder]

Did you use the generate panels functionnality to generate your panel ?
If not, try it. Because the panel should be configured to trigger the correct message…

[cartmanBijdrager]

Hello !

I deleted my manual button.
I ran Generate Pannel button but i don’t see my scenes.

[cartmanBijdrager]

Well i just made some tests and now i can see the buttons !?
Is there a delay when you click on Generate Panel ??

I will try to do some test but my test scene is working now. I will come back with some news.

[MikaSleutelbeheerder]

Normally the generate panel is immediate.
But if it work now, it’s good 😉

[Auteur]

Berichten