Unable to add devices ZStick/Fibaro roller shutter

[bastien]

Hello,

My installation is based on a Sinology with an aeotec z-stick gen 5. I try to use figaro roller shutter Fibaro FGRM-222.

I first installed 2 roller shutter and was able to add these two devices to the z-wave network, only by 3 click on B button, with the z-stick, connected to Syno, but very close to the devices. Not a good solution to move the syno to add other devices.

I had troubles (I am learning how to use …) so I decided to reset the controller through pulse station.
To be sure, I also reset it on the key. Now I want to rebuild the network. I tried to reset the fiber’s by holding the B button 14 seconds (I doubt it is a factory reset because my device is still in two stable toggle button mode …)

Now, I don’t manage to add any device to the network, neither using pulse station, or by pressing the button on the stick. I tried to remove it before adding again, without any success.
I also tried to erase files zwcf*.xml and zwave.json …

Using the stick would be a better solution, but any other would match ….

Thanks for any help

You can find the log. Reading it, it seams working, but I have no device on the list …
2015-12-19 18:12:38.741 Always, OpenZwave Version 1.3.0 Starting Up
2015-12-19 18:12:38.742 Info, Setting Up Provided Network Key for Secure Communications
2015-12-19 18:12:38.742 Warning, Failed – Network Key Not Set
2015-12-19 18:12:38.743 Info, mgr, Added driver for controller /dev/ttyACM1
2015-12-19 18:12:38.743 Info, Opening controller /dev/ttyACM1
2015-12-19 18:12:38.743 Info, Trying to open serial port /dev/ttyACM1 (attempt 1)
2015-12-19 18:12:38.749 Info, Serial port /dev/ttyACM1 opened (attempt 1)
2015-12-19 18:12:38.749 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-19 18:12:38.749 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2015-12-19 18:12:38.750 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2015-12-19 18:12:38.750 Detail,
2015-12-19 18:12:38.750 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-19 18:12:38.753 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
2015-12-19 18:12:38.753 Detail,
2015-12-19 18:12:38.753 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
2015-12-19 18:12:38.753 Info, contrlr, Static Controller library, version Z-Wave 3.95
2015-12-19 18:12:38.754 Detail, Node045, Expected reply was received
2015-12-19 18:12:38.754 Detail, Node045, Message transaction complete
2015-12-19 18:12:38.754 Detail,
2015-12-19 18:12:38.754 Detail, contrlr, Removing current message
2015-12-19 18:12:38.754 Detail,
2015-12-19 18:12:38.754 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2015-12-19 18:12:38.757 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0xe6, 0xf8, 0xb1, 0x65, 0x01, 0x1d
2015-12-19 18:12:38.757 Detail,
2015-12-19 18:12:38.757 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0xe6f8b165. Our node ID = 1
2015-12-19 18:12:38.757 Detail, Node248, Expected reply was received
2015-12-19 18:12:38.757 Detail, Node248, Message transaction complete
2015-12-19 18:12:38.757 Detail,
2015-12-19 18:12:38.758 Detail, contrlr, Removing current message
2015-12-19 18:12:38.758 Detail,
2015-12-19 18:12:38.758 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2015-12-19 18:12:38.760 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
2015-12-19 18:12:38.760 Detail,
2015-12-19 18:12:38.760 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
2015-12-19 18:12:38.760 Info, contrlr, There is no SUC ID Server (SIS) in this network.
2015-12-19 18:12:38.760 Info, contrlr, The PC controller is a primary controller.
2015-12-19 18:12:38.760 Detail, Node215, Expected reply was received
2015-12-19 18:12:38.760 Detail, Node215, Message transaction complete
2015-12-19 18:12:38.760 Detail,
2015-12-19 18:12:38.760 Detail, contrlr, Removing current message
2015-12-19 18:12:38.760 Detail,
2015-12-19 18:12:38.760 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2015-12-19 18:12:38.765 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
2015-12-19 18:12:38.765 Detail,
2015-12-19 18:12:38.765 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
2015-12-19 18:12:38.765 Info, contrlr, Serial API Version: 1.0
2015-12-19 18:12:38.765 Info, contrlr, Manufacturer ID: 0x0086
2015-12-19 18:12:38.765 Info, contrlr, Product Type: 0x0001
2015-12-19 18:12:38.765 Info, contrlr, Product ID: 0x005a
2015-12-19 18:12:38.765 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
2015-12-19 18:12:38.766 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
2015-12-19 18:12:38.766 Detail, Expected reply was received
2015-12-19 18:12:38.766 Detail, Message transaction complete
2015-12-19 18:12:38.766 Detail,
2015-12-19 18:12:38.766 Detail, contrlr, Removing current message
2015-12-19 18:12:38.766 Detail,
2015-12-19 18:12:38.766 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2015-12-19 18:12:38.768 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
2015-12-19 18:12:38.768 Detail,
2015-12-19 18:12:38.768 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
2015-12-19 18:12:38.768 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
2015-12-19 18:12:38.768 Detail, Node172, Expected reply was received
2015-12-19 18:12:38.768 Detail, Node172, Message transaction complete
2015-12-19 18:12:38.768 Detail,
2015-12-19 18:12:38.768 Detail, contrlr, Removing current message
2015-12-19 18:12:38.769 Detail,
2015-12-19 18:12:38.769 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
2015-12-19 18:12:38.825 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0x53, 0xb4, 0x76, 0x8d, 0x68, 0xd4, 0x1a, 0x31, 0x41, 0x6b, 0x01, 0xb2, 0x58, 0x07, 0xd8, 0xb3, 0xe8, 0x33, 0x5f, 0x2f, 0x3f, 0xf4, 0x3c, 0x6b, 0x1f, 0xde, 0xa6, 0xf2, 0x9b, 0xde, 0xcc, 0x75, 0x9e
2015-12-19 18:12:38.825 Detail,
2015-12-19 18:12:38.825 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
2015-12-19 18:12:38.825 Detail, Node032, Expected reply was received
2015-12-19 18:12:38.825 Detail, Node032, Message transaction complete
2015-12-19 18:12:38.825 Detail,
2015-12-19 18:12:38.825 Detail, contrlr, Removing current message
2015-12-19 18:12:38.826 Detail,
2015-12-19 18:12:38.826 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
2015-12-19 18:12:38.927 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
2015-12-19 18:12:38.927 Detail,
2015-12-19 18:12:38.927 Info, mgr, Driver with Home ID of 0xe6f8b165 is now ready.
2015-12-19 18:12:38.927 Info,
2015-12-19 18:12:38.928 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
2015-12-19 18:12:38.928 Info, contrlr, Node 001 – Known
2015-12-19 18:12:38.928 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Probe1
2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Associations
2015-12-19 18:12:38.929 Detail, Node001, QueryStage_Neighbors
2015-12-19 18:12:38.929 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
2015-12-19 18:12:38.929 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
2015-12-19 18:12:38.929 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
2015-12-19 18:12:38.929 Detail, Expected reply was received
2015-12-19 18:12:38.929 Detail, Message transaction complete
2015-12-19 18:12:38.929 Detail,
2015-12-19 18:12:38.929 Detail, contrlr, Removing current message
2015-12-19 18:12:38.929 Detail, Node001, Notification: DriverReady
2015-12-19 18:12:38.931 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:39.157 Detail, Node001, Notification: NodeAdded
2015-12-19 18:12:39.158 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:39.447 Detail, Node001, Notification: NodeProtocolInfo
2015-12-19 18:12:39.448 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:39.670 Detail, Node001, Notification: EssentialNodeQueriesComplete
2015-12-19 18:12:39.671 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:39.959 Detail, Node001, Notification: ValueAdded
2015-12-19 18:12:39.961 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:40.270 Detail, Node001, Notification: NodeNaming
2015-12-19 18:12:40.271 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-19 18:12:40.580 Detail,
2015-12-19 18:12:40.580 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
2015-12-19 18:12:40.583 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x96, 0x0f, 0x64
2015-12-19 18:12:40.583 Detail,
2015-12-19 18:12:40.583 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
2015-12-19 18:12:40.583 Detail, Node015, Expected reply was received
2015-12-19 18:12:40.583 Detail, Node015, Message transaction complete
2015-12-19 18:12:40.583 Detail,
2015-12-19 18:12:40.583 Detail, contrlr, Removing current message
2015-12-19 18:12:40.584 Detail,
2015-12-19 18:12:40.584 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
2015-12-19 18:12:40.586 Detail, contrlr, Removing current message
2015-12-19 18:12:40.586 Detail,
2015-12-19 18:12:40.586 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
2015-12-19 18:12:40.591 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
2015-12-19 18:12:40.591 Detail,
2015-12-19 18:12:40.591 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
2015-12-19 18:12:40.591 Info, Node001, Neighbors of this node are:
2015-12-19 18:12:40.591 Info, Node001, (none reported)
2015-12-19 18:12:40.591 Detail, Expected reply was received
2015-12-19 18:12:40.591 Detail, Message transaction complete
2015-12-19 18:12:40.591 Detail,
2015-12-19 18:12:40.591 Detail, Node001, Removing current message
2015-12-19 18:12:40.592 Detail, Node001, Query Stage Complete (Neighbors)
2015-12-19 18:12:40.592 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Session
2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Dynamic
2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Configuration
2015-12-19 18:12:40.592 Detail, Node001, QueryStage_Complete
2015-12-19 18:12:40.592 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
2015-12-19 18:12:40.592 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
2015-12-19 18:12:40.592 Info, Node query processing complete.
2015-12-19 18:12:40.592 Detail, Node001, Notification: NodeQueriesComplete
2015-12-19 18:12:40.594 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165

[K.Rens]

Hi

Normally before christmas we will release a new version that has a new zwave library and a lot of new features, like associations.
This will for instance allow you to control all devices at the same time with a single button press.

To come back to your problem:
If you zwave stick reaches far enough to control the devices, there is no need to move your entire synology.
There are always 2 ways to include your devices:
1) by using the button on your usb key
2) using the controller commands inside PulseStation.

To reset your 222:
1) Make sure the module is connected to the power supply.
2) Press and hold the B-button for ca. 14 seconds.
3) LED indicator will glow yellow.
4) Release the B-button and press it again, briefly.
5) The Roller Shutter memory is now empty.
6) The module goes into the auto inclusion mode, until any button
is pushed

After the reset, just put the controller into ‘add device’ mode and it will look for the device.

I do not see inside your logs that you tried to do the last step.

Kind regards,
K.Rens

[bastien]

Thank you for your answer. I got the new release today.

As I said, I tried to hard reset my fibaro but nothing happen. It becomes blue and then green/perhaps yellow but only after 8 seconds. For me, it doesn’t works because it is still in stable toggle button mode. After that, I tried to add it in the Z-wave network.
I don’t understand the log, Here is the log :

2015-12-20 16:58:33.113 Always, OpenZwave Version 1.3.0 Starting Up
2015-12-20 16:58:33.115 Info, Setting Up Provided Network Key for Secure Communications
2015-12-20 16:58:33.115 Warning, Failed – Network Key Not Set
2015-12-20 16:58:33.115 Info, mgr, Added driver for controller /dev/ttyACM1
2015-12-20 16:58:33.122 Info, Opening controller /dev/ttyACM1
2015-12-20 16:58:33.122 Info, Trying to open serial port /dev/ttyACM1 (attempt 1)
2015-12-20 16:58:33.127 Info, Serial port /dev/ttyACM1 opened (attempt 1)
2015-12-20 16:58:33.127 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2015-12-20 16:58:33.128 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2015-12-20 16:58:33.129 Detail,
2015-12-20 16:58:33.129 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x15) – FUNC_ID_ZW_GET_VERSION: 0x01, 0x03, 0x00, 0x15, 0xe9
2015-12-20 16:58:33.133 Detail, contrlr, Received: 0x01, 0x10, 0x01, 0x15, 0x5a, 0x2d, 0x57, 0x61, 0x76, 0x65, 0x20, 0x33, 0x2e, 0x39, 0x35, 0x00, 0x01, 0x99
2015-12-20 16:58:33.133 Detail,
2015-12-20 16:58:33.133 Info, contrlr, Received reply to FUNC_ID_ZW_GET_VERSION:
2015-12-20 16:58:33.133 Info, contrlr, Static Controller library, version Z-Wave 3.95
2015-12-20 16:58:33.133 Detail, Node045, Expected reply was received
2015-12-20 16:58:33.133 Detail, Node045, Message transaction complete
2015-12-20 16:58:33.134 Detail,
2015-12-20 16:58:33.134 Detail, contrlr, Removing current message
2015-12-20 16:58:33.134 Detail,
2015-12-20 16:58:33.134 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x20) – FUNC_ID_ZW_MEMORY_GET_ID: 0x01, 0x03, 0x00, 0x20, 0xdc
2015-12-20 16:58:33.137 Detail, contrlr, Received: 0x01, 0x08, 0x01, 0x20, 0xe6, 0xf8, 0xb1, 0x65, 0x01, 0x1d
2015-12-20 16:58:33.137 Detail,
2015-12-20 16:58:33.138 Info, contrlr, Received reply to FUNC_ID_ZW_MEMORY_GET_ID. Home ID = 0xe6f8b165. Our node ID = 1
2015-12-20 16:58:33.138 Detail, Node248, Expected reply was received
2015-12-20 16:58:33.138 Detail, Node248, Message transaction complete
2015-12-20 16:58:33.138 Detail,
2015-12-20 16:58:33.138 Detail, contrlr, Removing current message
2015-12-20 16:58:33.138 Detail,
2015-12-20 16:58:33.138 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x05) – FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES: 0x01, 0x03, 0x00, 0x05, 0xf9
2015-12-20 16:58:33.141 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x05, 0x28, 0xd7
2015-12-20 16:58:33.141 Detail,
2015-12-20 16:58:33.141 Info, contrlr, Received reply to FUNC_ID_ZW_GET_CONTROLLER_CAPABILITIES:
2015-12-20 16:58:33.142 Info, contrlr, There is no SUC ID Server (SIS) in this network.
2015-12-20 16:58:33.142 Info, contrlr, The PC controller is a primary controller.
2015-12-20 16:58:33.142 Detail, Node215, Expected reply was received
2015-12-20 16:58:33.142 Detail, Node215, Message transaction complete
2015-12-20 16:58:33.142 Detail,
2015-12-20 16:58:33.142 Detail, contrlr, Removing current message
2015-12-20 16:58:33.142 Detail,
2015-12-20 16:58:33.143 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x07) – FUNC_ID_SERIAL_API_GET_CAPABILITIES: 0x01, 0x03, 0x00, 0x07, 0xfb
2015-12-20 16:58:33.147 Detail, contrlr, Received: 0x01, 0x2b, 0x01, 0x07, 0x01, 0x00, 0x00, 0x86, 0x00, 0x01, 0x00, 0x5a, 0xfe, 0x81, 0xff, 0x88, 0x4f, 0x1f, 0x00, 0x00, 0xfb, 0x9f, 0x7d, 0xa0, 0x67, 0x00, 0x00, 0x80, 0x00, 0x80, 0x86, 0x00, 0x00, 0x00, 0xe8, 0x73, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x60, 0x00, 0x00, 0xfb
2015-12-20 16:58:33.147 Detail,
2015-12-20 16:58:33.148 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_CAPABILITIES
2015-12-20 16:58:33.148 Info, contrlr, Serial API Version: 1.0
2015-12-20 16:58:33.148 Info, contrlr, Manufacturer ID: 0x0086
2015-12-20 16:58:33.148 Info, contrlr, Product Type: 0x0001
2015-12-20 16:58:33.148 Info, contrlr, Product ID: 0x005a
2015-12-20 16:58:33.148 Detail, contrlr, Queuing (Command) FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
2015-12-20 16:58:33.148 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
2015-12-20 16:58:33.149 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
2015-12-20 16:58:33.149 Detail, contrlr, Queuing (Command) FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
2015-12-20 16:58:33.149 Detail, Expected reply was received
2015-12-20 16:58:33.150 Detail, Message transaction complete
2015-12-20 16:58:33.150 Detail,
2015-12-20 16:58:33.150 Detail, contrlr, Removing current message
2015-12-20 16:58:33.150 Detail,
2015-12-20 16:58:33.150 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x56) – FUNC_ID_ZW_GET_SUC_NODE_ID: 0x01, 0x03, 0x00, 0x56, 0xaa
2015-12-20 16:58:33.152 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x56, 0x00, 0xac
2015-12-20 16:58:33.152 Detail,
2015-12-20 16:58:33.152 Info, contrlr, Received reply to GET_SUC_NODE_ID. Node ID = 0
2015-12-20 16:58:33.153 Info, Controller Does not Support SUC – Cannot Setup Controller as SUC Node
2015-12-20 16:58:33.153 Detail, Node172, Expected reply was received
2015-12-20 16:58:33.153 Detail, Node172, Message transaction complete
2015-12-20 16:58:33.153 Detail,
2015-12-20 16:58:33.153 Detail, contrlr, Removing current message
2015-12-20 16:58:33.153 Detail,
2015-12-20 16:58:33.153 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x1c) – FUNC_ID_ZW_GET_RANDOM: 0x01, 0x04, 0x00, 0x1c, 0x20, 0xc7
2015-12-20 16:58:33.209 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x1c, 0x01, 0x20, 0x98, 0x58, 0x9b, 0x57, 0xad, 0xc6, 0x07, 0x72, 0x0d, 0xf5, 0xea, 0x31, 0xf1, 0x10, 0xb1, 0x1e, 0xf5, 0xad, 0x57, 0xa5, 0x6d, 0x3c, 0xd5, 0x37, 0xad, 0xb8, 0x83, 0xdf, 0xb6, 0xb1, 0xfe, 0x53, 0x63
2015-12-20 16:58:33.210 Detail,
2015-12-20 16:58:33.210 Info, contrlr, Received reply to FUNC_ID_ZW_GET_RANDOM: true
2015-12-20 16:58:33.210 Detail, Node032, Expected reply was received
2015-12-20 16:58:33.210 Detail, Node032, Message transaction complete
2015-12-20 16:58:33.210 Detail,
2015-12-20 16:58:33.210 Detail, contrlr, Removing current message
2015-12-20 16:58:33.211 Detail,
2015-12-20 16:58:33.211 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x02) – FUNC_ID_SERIAL_API_GET_INIT_DATA: 0x01, 0x03, 0x00, 0x02, 0xfe
2015-12-20 16:58:33.312 Detail, contrlr, Received: 0x01, 0x25, 0x01, 0x02, 0x05, 0x00, 0x1d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0xc5
2015-12-20 16:58:33.312 Detail,
2015-12-20 16:58:33.312 Info, mgr, Driver with Home ID of 0xe6f8b165 is now ready.
2015-12-20 16:58:33.312 Info,
2015-12-20 16:58:33.313 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_GET_INIT_DATA:
2015-12-20 16:58:33.313 Info, contrlr, Node 001 – Known
2015-12-20 16:58:33.313 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe1 live=1
2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Probe1
2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Associations
2015-12-20 16:58:33.314 Detail, Node001, QueryStage_Neighbors
2015-12-20 16:58:33.314 Detail, contrlr, Requesting routing info (neighbor list) for Node 1
2015-12-20 16:58:33.314 Detail, Node001, Queuing (Command) Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
2015-12-20 16:58:33.314 Detail, Node001, Queuing (Query) Query Stage Complete (Neighbors)
2015-12-20 16:58:33.314 Detail, Expected reply was received
2015-12-20 16:58:33.314 Detail, Message transaction complete
2015-12-20 16:58:33.314 Detail,
2015-12-20 16:58:33.314 Detail, contrlr, Removing current message
2015-12-20 16:58:33.314 Detail, Node001, Notification: DriverReady
2015-12-20 16:58:33.349 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:33.573 Detail, Node001, Notification: NodeAdded
2015-12-20 16:58:33.574 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:33.797 Detail, Node001, Notification: NodeProtocolInfo
2015-12-20 16:58:33.798 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:34.117 Detail, Node001, Notification: EssentialNodeQueriesComplete
2015-12-20 16:58:34.118 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:34.433 Detail, Node001, Notification: ValueAdded
2015-12-20 16:58:34.434 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:34.749 Detail, Node001, Notification: NodeNaming
2015-12-20 16:58:34.750 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:34.972 Detail,
2015-12-20 16:58:34.972 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x06) – FUNC_ID_SERIAL_API_SET_TIMEOUTS: 0x01, 0x05, 0x00, 0x06, 0x64, 0x0f, 0x97
2015-12-20 16:58:34.974 Detail, contrlr, Received: 0x01, 0x05, 0x01, 0x06, 0x64, 0x0f, 0x96
2015-12-20 16:58:34.974 Detail,
2015-12-20 16:58:34.974 Info, contrlr, Received reply to FUNC_ID_SERIAL_API_SET_TIMEOUTS
2015-12-20 16:58:34.974 Detail, Node015, Expected reply was received
2015-12-20 16:58:34.974 Detail, Node015, Message transaction complete
2015-12-20 16:58:34.974 Detail,
2015-12-20 16:58:34.974 Detail, contrlr, Removing current message
2015-12-20 16:58:34.974 Detail,
2015-12-20 16:58:34.974 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x00) – FUNC_ID_SERIAL_API_APPL_NODE_INFORMATION: 0x01, 0x07, 0x00, 0x03, 0x01, 0x02, 0x01, 0x00, 0xf9
2015-12-20 16:58:34.976 Detail, contrlr, Removing current message
2015-12-20 16:58:34.976 Detail,
2015-12-20 16:58:34.976 Info, Node001, Sending (Command) message (Callback ID=0x00, Expected Reply=0x80) – Get Routing Info (Node=1): 0x01, 0x07, 0x00, 0x80, 0x01, 0x00, 0x00, 0x03, 0x7a
2015-12-20 16:58:34.981 Detail, Node001, Received: 0x01, 0x20, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5e
2015-12-20 16:58:34.981 Detail,
2015-12-20 16:58:34.981 Info, Node001, Received reply to FUNC_ID_ZW_GET_ROUTING_INFO
2015-12-20 16:58:34.981 Info, Node001, Neighbors of this node are:
2015-12-20 16:58:34.981 Info, Node001, (none reported)
2015-12-20 16:58:34.981 Detail, Expected reply was received
2015-12-20 16:58:34.981 Detail, Message transaction complete
2015-12-20 16:58:34.981 Detail,
2015-12-20 16:58:34.981 Detail, Node001, Removing current message
2015-12-20 16:58:34.981 Detail, Node001, Query Stage Complete (Neighbors)
2015-12-20 16:58:34.982 Detail, Node001, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Session live=1
2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Session
2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Dynamic
2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Configuration
2015-12-20 16:58:34.982 Detail, Node001, QueryStage_Complete
2015-12-20 16:58:34.982 Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=0
2015-12-20 16:58:34.982 Warning, CheckCompletedNodeQueries all=1, deadFound=0 sleepingOnly=1
2015-12-20 16:58:34.982 Info, Node query processing complete.
2015-12-20 16:58:34.982 Detail, Node001, Notification: NodeQueriesComplete
2015-12-20 16:58:34.983 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 16:58:35.209 Detail, contrlr, Notification: AllNodesQueried
2015-12-20 16:58:35.210 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:06:52.308 Detail, contrlr, Queuing (Controller) Add Device
2015-12-20 17:06:52.309 Info, Add Device
2015-12-20 17:06:52.309 Detail, contrlr, Queuing (Command) ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
2015-12-20 17:06:52.309 Detail, Notification: ControllerComand – Starting
2015-12-20 17:06:52.310 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:06:52.620 Detail,
2015-12-20 17:06:52.620 Info, contrlr, Sending (Command) message (Callback ID=0x0a, Expected Reply=0x4a) – ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x0a, 0x7b
2015-12-20 17:06:52.624 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x01, 0x00, 0x00, 0xb9
2015-12-20 17:06:52.624 Detail,
2015-12-20 17:06:52.624 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2015-12-20 17:06:52.624 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
2015-12-20 17:06:52.624 Detail, Node001, Expected callbackId was received
2015-12-20 17:06:52.624 Detail, Node001, Expected reply was received
2015-12-20 17:06:52.624 Detail, Node001, Message transaction complete
2015-12-20 17:06:52.624 Detail,
2015-12-20 17:06:52.625 Detail, contrlr, Removing current message
2015-12-20 17:06:52.625 Detail, Notification: ControllerCommand – Waiting
2015-12-20 17:06:52.626 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:06:53.110 Info, WriteNextMsg Controller nothing to do
2015-12-20 17:08:32.665 Info, Cancel Add Node
2015-12-20 17:08:32.665 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2015-12-20 17:08:32.665 Detail,
2015-12-20 17:08:32.665 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2015-12-20 17:08:32.665 Detail, Notification: ControllerCommand – Canceled
2015-12-20 17:08:32.666 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:08:32.710 Info, Cancel Add Node
2015-12-20 17:08:32.711 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2015-12-20 17:08:32.953 Detail, Notification: ControllerCommand – Canceled
2015-12-20 17:08:32.954 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:08:33.171 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
2015-12-20 17:08:33.171 Detail,
2015-12-20 17:08:33.171 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2015-12-20 17:08:33.171 Info, contrlr, ADD_NODE_STATUS_DONE
2015-12-20 17:08:33.171 Detail, Node006, Expected reply was received
2015-12-20 17:08:33.171 Detail, Node006, Message transaction complete
2015-12-20 17:08:33.171 Detail,
2015-12-20 17:08:33.171 Detail, contrlr, Removing current message
2015-12-20 17:08:33.172 Detail, Notification: ControllerCommand – Completed
2015-12-20 17:08:33.173 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165
2015-12-20 17:08:33.390 Detail,
2015-12-20 17:08:33.390 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) – Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2015-12-20 17:08:33.442 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x0a, 0x06, 0x00, 0x00, 0xbe
2015-12-20 17:08:33.442 Detail,
2015-12-20 17:08:33.442 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2015-12-20 17:08:33.442 Info, contrlr, ADD_NODE_STATUS_DONE
2015-12-20 17:08:33.442 Detail, Node006, Expected reply was received
2015-12-20 17:08:33.442 Detail, Node006, Message transaction complete
2015-12-20 17:08:33.442 Detail,
2015-12-20 17:08:33.442 Detail, contrlr, Removing current message
2015-12-20 17:08:33.442 Detail, Notification: ControllerCommand – Completed
2015-12-20 17:08:33.444 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xe6f8b165

[Mika]

Hi,

First, all the log you see come from the OpenZwave library…When the library starts, there are a lot of procedures that build your network correctly.

If you use the Aeon Labs Dongle, I recommend you to associate it directly via the USB Stick (I have the old one (ZStick V2)).

When you want to include a device into your network, it’s recommended to do the exclusion procedure first and then associate.

For your FRGM222 ( I have 4 devices like that), I only configure 2 properties :
*Switch Type
*Forced Roller Shutter Calibration

For the reset procedure of your device, just do the procedure describe in the documentation of the device. The OpenZwave library is OpenSource and can contains some bugs.

So maybe try again that steps :
* Reset the controller via PulseStation (or another tool if you want)
* Reset your FGRM222
* Remove the file /web/PulseStation/zwave.json and zwcfg*.xml
* Exclude your devices from your Aeon dongle (just to be sure)
* Include your devices
* Plug the dongle (verify the serial port associated)
* Start the zwave service
* Wait a few minutes that the OpenZwave library is correctly started

Once you are there, you can eventually send me by mail the remote access to your PulseStation.
So I can take a look if everything sounds good!

Best Regards,
Mika

[coldbringer]

Hey Bastien,

I have the same equipment so here is my 2 cents.

I didnt work at first, but after a couple of tries I found that the roller shutter reset works exactly as described in the instructions. The yellow is not a yellow really, looks pretty greenish. I think it is the third or fourth color that appears.

The Z-Stick has a built-in battery. So you can remove it from the USB port of your DiskStation and take it to the device you need to include/exclude. Hold the button and the LED will start flashing slowly (blue color) ==> then it’s in inclusion mode.

Although at first I was sure that I had no range-related problems, installing an Aeon Labs range extender really solved many weird problems that I had. Depending on the positioning of the antennas of the Fibaro switches the range can obviously be drastically reduced. In my case, this led to roller shutters that would sometimes work perfectly and sometimes do nothing at all…

Good luck
Carlos

[bastien]

Hi and thank you all for your help,

By reading your post and looking everywhere, I solved my problem :

– Ok, the yellow for the fibaro roller shutter is quit green
– I think the reset is only effective after module exclusion
– I manage to add module using the stick’s button, but I had to click 4 or 5 times on the B-button and not only 3 as described in the manual. To be sure, S1 and S2 were deconnected (I read that S1 might be deconnected . S2 was because I was desperate 😀 :D)

Bastien

[Auteur]

Berichten