Tags: Zwave network key
mei 19, 2016 om 10:45 am #3394macgreg0rBijdrager
I have a Zwave plus (I gess) Aeon labs S2 stick and Fibaro devices (plugs and roller shutter, smoke sensor).
I’ve created my network by pair device by device directly with the key button on the stick.
But now I want to secure the Zwave network by setting a network-key in PulseStation.
The thing is that:
1- I’m not sure that my devices are compatible with this crypting option, can’t find clear info about that.
2- I saw somewhere that to enable network-key, I have to build the zwave network with the key form the start! this mean remove all devices, and then re-include them. Is that right?
I’m not going to do that if my devices are not compatible…
And if thoses are compatible, I’d like to know if I can re-include device 1 by 1, or if I have to remove all devices, then re-include all?mei 19, 2016 om 11:08 am #3395Miss LauraModerator
In my home all devices support the zwave security key.
I think it’s not used if the device doesn’t support it.
Should be backwards compatible.
I also added the key only after I added the devices and it seems to work fine.
From the devices you mention, only the smoke sensor for sure uses this security key.
The other devices I do not know.
Lauramei 19, 2016 om 5:41 pm #3402macgreg0rBijdrager
To test, I although added a network-key after included all devices.
I even put a wrong format network-key, and all worked perfectly with that wrong network-key, until I try to restart zwave service.
That’s why I think the network-key is only taken at service start, and I think that only devices added with that active key are ciphered.
I’ve found this https://github.com/OpenZWave/open-zwave/wiki/Adding-Security-Devices-to-OZW
but with my poor zwave protocol knowledge and english level, I’m not sure.augustus 28, 2019 om 2:59 pm #12313ArtiBijdrager
I use a Z-Stick Gen5 USB controller on my syno, and i use PulseStation since 2014.
I was thinking my Z-wave plus components (about 20) were secured, but it seems that’s not the case.
Today Iihave issues with a danalock zwave item, and after many tries, i didn’t achieve in add it a secured way. So i can’t use the lock with z-wave scenes…
The log says
2019-08-28 14:25:17.506 Always, OpenZwave Version 1.3.0 Starting Up
2019-08-28 14:25:17.507 Info, Setting Up Provided Network Key for Secure Communications
2019-08-28 14:25:17.507 Info, mgr, Added driver for controller /dev/ttyACM0
2019-08-28 14:25:17.507 Info, Opening controller /dev/ttyACM0
2019-08-28 14:25:17.507 Info, Trying to open serial port /dev/ttyACM0 (attempt 1)
2019-08-28 14:25:17.511 Info, Serial port /dev/ttyACM0 opened (attempt 1)
2019-08-28 14:56:19.884 Detail,
2019-08-28 14:56:19.884 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2019-08-28 14:56:19.884 Info, ADD_NODE_STATUS_ADDING_SLAVE
2019-08-28 14:56:19.884 Info, Adding node ID 35 – Non-Secure
How can i make it works ?
(excuse me for my bad English, i’m French)
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.