guillaume

Aangemaakte reacties

11 berichten aan het bekijken - 1 tot 11 (van in totaal 11)
  • Auteur
    Berichten
  • In reactie op: DSM 6.0-7321 #3037
    Avatar
    guillaume
    Bijdrager

    i have installed manually the spk file you sent me, installation was successfull, no update is requested but unfortunaty the service pulsestation does not start at all even after reboot of my synology. thank you

    G

    In reactie op: DSM 6.0-7321 #3032
    Avatar
    guillaume
    Bijdrager

    i am available using my 3G to remote access my Synology, just sent u a direct email
    thanks

    G

    In reactie op: DSM 6.0-7321 #3027
    Avatar
    guillaume
    Bijdrager

    Thank you, using DS212j. I will send u the logs by email.
    Appreciate your help

    G

    In reactie op: DSM 6.0-7321 #3024
    Avatar
    guillaume
    Bijdrager

    Same issue here. Nothing is downloaded and then it said the version has been successfuly installed. Showing version 1.3.0 and the Pulse service does not start.
    Thank you for your assistance
    G

    G

    In reactie op: Fibaro Smoke Sensor Blocky rules #1772
    Avatar
    guillaume
    Bijdrager

    Let me give it a try. Keep u posted
    thanks
    G

    G

    In reactie op: Trouble including the Fibaro Smoke Sensor #1769
    Avatar
    guillaume
    Bijdrager

    Any luck Mika in adding Fibaro Smoke Sensor into ImperiHome? Would be great to have temperature and alerts.
    Thanks again for your hard work
    G

    G

    In reactie op: Trouble including the Fibaro Smoke Sensor #1768
    Avatar
    guillaume
    Bijdrager

    Looks much better now. After a couple of days without doing any change it came up by itself! The version showed up in the propertie as well as the temperature and a bunch of other fields. Weird !
    Anyway looks good. Thanks

    G

    In reactie op: FIBARO Motion Sensor – device may be asleep #1734
    Avatar
    guillaume
    Bijdrager

    thank you for the new release. I took the upgrade and I am still struggling in adding the Motion Sensor (FGMS-001).
    Regards,
    G

    2015-11-11 12:00:08.631 Detail, Node016, Queuing (Controller) Has Node Failed
    2015-11-11 12:00:08.668 Info, Requesting whether node 16 has failed
    2015-11-11 12:00:08.669 Detail, contrlr, Queuing (Command) ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x10, 0x89
    2015-11-11 12:00:08.669 Detail, Notification: ControllerComand – Starting
    2015-11-11 12:00:09.732 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b

    2015-11-11 11:33:38.715 Info, Node016, Sending (Query) message (Callback ID=0x00, Expected Reply=0x41) – Get Node Protocol Info (Node=16): 0x01, 0x04, 0x00, 0x41, 0x10, 0xaa
    2015-11-11 11:33:38.726 Detail, Node016, Received: 0x01, 0x09, 0x01, 0x41, 0x53, 0x9c, 0x00, 0x04, 0x20, 0x01, 0x5c
    2015-11-11 11:33:38.727 Detail,
    2015-11-11 11:33:38.727 Info, Node016, Received reply to FUNC_ID_ZW_GET_NODE_PROTOCOL_INFO
    2015-11-11 11:33:38.727 Info, Node016, Protocol Info for Node 16:
    2015-11-11 11:33:38.727 Info, Node016, Listening = false
    2015-11-11 11:33:38.727 Info, Node016, Frequent = false
    2015-11-11 11:33:38.727 Info, Node016, Beaming = true
    2015-11-11 11:33:38.727 Info, Node016, Routing = true
    2015-11-11 11:33:38.727 Info, Node016, Max Baud Rate = 40000
    2015-11-11 11:33:38.727 Info, Node016, Version = 4
    2015-11-11 11:33:38.728 Info, Node016, Security = false
    2015-11-11 11:33:38.728 Detail, Node156, Expected reply was received
    2015-11-11 11:33:38.728 Detail, Node156, Message transaction complete
    2015-11-11 11:33:38.728 Detail,
    2015-11-11 11:33:38.728 Detail, Node016, Removing current message
    2015-11-11 11:33:38.728 Detail, Node016, Query Stage Complete (ProtocolInfo)
    2015-11-11 11:33:38.728 Detail, Node016, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe live=1
    2015-11-11 11:33:38.728 Detail, Node016, QueryStage_Probe
    2015-11-11 11:33:38.728 Info, Node016, NoOperation::Set – Routing=true
    2015-11-11 11:33:38.729 Detail, Node016, Queuing (NoOp) NoOperation_Set (Node=16): 0x01, 0x09, 0x00, 0x13, 0x10, 0x02, 0x00, 0x00, 0x25, 0x9b, 0x49
    2015-11-11 11:33:38.729 Detail, Node016, Queuing (Query) Query Stage Complete (Probe)
    2015-11-11 11:33:38.729 Detail,
    2015-11-11 11:33:38.729 Info, Node016, Sending (NoOp) message (Callback ID=0x9b, Expected Reply=0x13) – NoOperation_Set (Node=16): 0x01, 0x09, 0x00, 0x13, 0x10, 0x02, 0x00, 0x00, 0x25, 0x9b, 0x49
    2015-11-11 11:33:38.746 Detail, Node016, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2015-11-11 11:33:38.746 Detail, Node016, ZW_SEND_DATA delivered to Z-Wave stack
    2015-11-11 11:33:45.697 Detail, Node016, Received: 0x01, 0x05, 0x00, 0x13, 0x9b, 0x01, 0x73
    2015-11-11 11:33:45.697 Detail, Node016, ZW_SEND_DATA Request with callback ID 0x9b received (expected 0x9b)
    2015-11-11 11:33:45.697 Info, Node016, WARNING: ZW_SEND_DATA failed. No ACK received – device may be asleep.
    2015-11-11 11:33:45.697 Info, Node016, Node 16 has been marked as asleep
    2015-11-11 11:33:45.697 Info, Node016, Node not responding – moving QueryStageComplete command to Wake-Up queue
    2015-11-11 11:33:45.698 Detail, Node016, Notification: Notification – NoOperation
    2015-11-11 11:33:45.812 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:33:46.554 Detail, Node016, Notification: Notification – Node Asleep
    2015-11-11 11:33:46.631 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:34:55.623 Detail, Node016, Queuing (Controller) Has Node Failed
    2015-11-11 11:34:55.623 Info, Requesting whether node 16 has failed
    2015-11-11 11:34:55.623 Detail, contrlr, Queuing (Command) ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x10, 0x89
    2015-11-11 11:34:55.623 Detail, Notification: ControllerComand – Starting
    2015-11-11 11:34:55.731 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:34:56.463 Detail,
    2015-11-11 11:34:56.464 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x62) – ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x10, 0x89
    2015-11-11 11:34:56.467 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x62, 0x01, 0x99
    2015-11-11 11:34:56.467 Detail,
    2015-11-11 11:34:56.467 Warning, Node016, WARNING: Received reply to FUNC_ID_ZW_IS_FAILED_NODE_ID – node 16 failed
    2015-11-11 11:34:56.468 Error, Node016, ERROR: node presumed dead
    2015-11-11 11:34:56.468 Warning, CheckCompletedNodeQueries m_allNodesQueried=1 m_awakeNodesQueried=1
    2015-11-11 11:34:56.468 Detail, Node153, Expected reply was received
    2015-11-11 11:34:56.468 Detail, Node153, Message transaction complete
    2015-11-11 11:34:56.468 Detail,
    2015-11-11 11:34:56.468 Detail, contrlr, Removing current message
    2015-11-11 11:34:56.468 Detail, Node016, Notification: Notification – Node Dead
    2015-11-11 11:34:56.546 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:34:58.052 Detail, Notification: ControllerCommand – NodeFailed
    2015-11-11 11:34:58.203 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:24.884 Detail, contrlr, Queuing (Controller) Add Device
    2015-11-11 11:36:24.885 Info, Add Device
    2015-11-11 11:36:24.885 Detail, contrlr, Queuing (Command) ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x9c, 0xed
    2015-11-11 11:36:24.885 Detail, Notification: ControllerComand – Starting
    2015-11-11 11:36:25.122 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:25.893 Detail,
    2015-11-11 11:36:25.893 Info, contrlr, Sending (Command) message (Callback ID=0x9c, Expected Reply=0x4a) – ControllerCommand_AddDevice: 0x01, 0x05, 0x00, 0x4a, 0xc1, 0x9c, 0xed
    2015-11-11 11:36:25.898 Detail, contrlr, Received: 0x01, 0x07, 0x00, 0x4a, 0x9c, 0x01, 0x00, 0x00, 0x2f
    2015-11-11 11:36:25.898 Detail,
    2015-11-11 11:36:25.898 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
    2015-11-11 11:36:25.898 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
    2015-11-11 11:36:25.898 Detail, Node001, Expected callbackId was received
    2015-11-11 11:36:25.898 Detail, Node001, Expected reply was received
    2015-11-11 11:36:25.898 Detail, Node001, Message transaction complete
    2015-11-11 11:36:25.898 Detail,
    2015-11-11 11:36:25.899 Detail, contrlr, Removing current message
    2015-11-11 11:36:25.899 Detail, Notification: ControllerCommand – Waiting
    2015-11-11 11:36:25.976 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:27.084 Info, WriteNextMsg Controller nothing to do
    2015-11-11 11:36:41.708 Detail, Received: 0x01, 0x1d, 0x00, 0x4a, 0x9c, 0x02, 0x0e, 0x16, 0x04, 0x07, 0x01, 0x5e, 0x20, 0x86, 0x72, 0x5a, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8e, 0x22, 0x9c, 0x98, 0x7a, 0xe3
    2015-11-11 11:36:41.708 Detail,
    2015-11-11 11:36:41.708 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:

    G

    In reactie op: Trouble including the Fibaro Smoke Sensor #1733
    Avatar
    guillaume
    Bijdrager

    hello, still cannot add the smoke sensor even with the new ZWAVE version (1.0.4). See log below
    thank you
    2015-11-11 11:36:50.958 Detail, Node014, Notification: NodeAdded
    2015-11-11 11:36:52.114 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:55.676 Detail, Node014, Notification: NodeProtocolInfo
    2015-11-11 11:36:55.764 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:56.556 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:36:56.642 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:57.415 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:36:57.502 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:59.078 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:36:59.162 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:36:59.948 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:00.106 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:02.285 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:03.124 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:10.624 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:11.035 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:16.896 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:17.144 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:17.935 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:18.050 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:19.623 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:19.712 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:20.525 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:20.621 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:22.724 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:23.274 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:25.827 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:25.912 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:26.706 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:26.806 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:27.624 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:27.711 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:29.340 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:29.429 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:30.265 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:30.353 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:31.165 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:31.350 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:35.263 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:35.644 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:36.435 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:36.523 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:37.305 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:37.393 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:38.784 Detail, Node014, Notification: ValueAdded
    2015-11-11 11:37:39.084 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:39.898 Detail, Notification: ControllerCommand – Completed
    2015-11-11 11:37:39.982 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:41.215 Detail,
    2015-11-11 11:37:41.216 Info, Node014, Sending (Query) message (Callback ID=0x00, Expected Reply=0x41) – Get Node Protocol Info (Node=14): 0x01, 0x04, 0x00, 0x41, 0x0e, 0xb4
    2015-11-11 11:37:41.218 Detail, Node014, Received: 0x01, 0x09, 0x01, 0x41, 0x53, 0x9c, 0x01, 0x04, 0x07, 0x01, 0x7a
    2015-11-11 11:37:41.219 Detail,
    2015-11-11 11:37:41.219 Info, Node014, Received reply to FUNC_ID_ZW_GET_NODE_PROTOCOL_INFO
    2015-11-11 11:37:41.219 Info, Node014, Protocol Info for Node 14:
    2015-11-11 11:37:41.219 Info, Node014, Listening = false
    2015-11-11 11:37:41.219 Info, Node014, Frequent = false
    2015-11-11 11:37:41.219 Info, Node014, Beaming = true
    2015-11-11 11:37:41.219 Info, Node014, Routing = true
    2015-11-11 11:37:41.219 Info, Node014, Max Baud Rate = 40000
    2015-11-11 11:37:41.220 Info, Node014, Version = 4
    2015-11-11 11:37:41.220 Info, Node014, Security = false
    2015-11-11 11:37:41.220 Detail, Node156, Expected reply was received
    2015-11-11 11:37:41.220 Detail, Node156, Message transaction complete
    2015-11-11 11:37:41.220 Detail,
    2015-11-11 11:37:41.220 Detail, Node014, Removing current message
    2015-11-11 11:37:41.220 Detail, Node014, Query Stage Complete (ProtocolInfo)
    2015-11-11 11:37:41.220 Detail, Node014, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Probe live=1
    2015-11-11 11:37:41.221 Detail, Node014, QueryStage_Probe
    2015-11-11 11:37:41.221 Info, Node014, NoOperation::Set – Routing=true
    2015-11-11 11:37:41.221 Detail, Node014, Queuing (NoOp) NoOperation_Set (Node=14): 0x01, 0x09, 0x00, 0x13, 0x0e, 0x02, 0x00, 0x00, 0x25, 0x9d, 0x51
    2015-11-11 11:37:41.221 Detail, Node014, Queuing (Query) Query Stage Complete (Probe)
    2015-11-11 11:37:41.221 Detail,
    2015-11-11 11:37:41.221 Info, Node014, Sending (NoOp) message (Callback ID=0x9d, Expected Reply=0x13) – NoOperation_Set (Node=14): 0x01, 0x09, 0x00, 0x13, 0x0e, 0x02, 0x00, 0x00, 0x25, 0x9d, 0x51
    2015-11-11 11:37:41.238 Detail, Node014, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2015-11-11 11:37:41.238 Detail, Node014, ZW_SEND_DATA delivered to Z-Wave stack
    2015-11-11 11:37:41.258 Detail, Node014, Received: 0x01, 0x05, 0x00, 0x13, 0x9d, 0x00, 0x74
    2015-11-11 11:37:41.258 Detail, Node014, ZW_SEND_DATA Request with callback ID 0x9d received (expected 0x9d)
    2015-11-11 11:37:41.258 Info, Node014, Request RTT 36 Average Request RTT 36
    2015-11-11 11:37:41.258 Detail, Expected callbackId was received
    2015-11-11 11:37:41.258 Detail, Expected reply was received
    2015-11-11 11:37:41.259 Detail, Message transaction complete
    2015-11-11 11:37:41.259 Detail,
    2015-11-11 11:37:41.259 Detail, Node014, Removing current message
    2015-11-11 11:37:41.259 Detail, Node014, Notification: Notification – NoOperation
    2015-11-11 11:37:41.353 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:37:44.591 Detail, Node014, Query Stage Complete (Probe)
    2015-11-11 11:37:44.591 Detail, Node014, AdvanceQueries queryPending=0 queryRetries=0 queryStage=WakeUp live=1
    2015-11-11 11:37:44.591 Detail, Node014, QueryStage_WakeUp
    2015-11-11 11:37:44.595 Detail, Node014, Queuing (WakeUp) WakeUpCmd_IntervalGet (Node=14): 0x01, 0x09, 0x00, 0x13, 0x0e, 0x02, 0x84, 0x05, 0x25, 0x9e, 0xd3
    2015-11-11 11:37:44.595 Detail, Node014, Queuing (Query) Query Stage Complete (WakeUp)
    2015-11-11 11:37:44.595 Detail,
    2015-11-11 11:37:44.595 Info, Node014, Sending (WakeUp) message (Callback ID=0x9e, Expected Reply=0x04) – WakeUpCmd_IntervalGet (Node=14): 0x01, 0x09, 0x00, 0x13, 0x0e, 0x02, 0x84, 0x05, 0x25, 0x9e, 0xd3
    2015-11-11 11:37:44.608 Detail, Node014, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
    2015-11-11 11:37:44.609 Detail, Node014, ZW_SEND_DATA delivered to Z-Wave stack
    2015-11-11 11:37:51.368 Detail, Node014, Received: 0x01, 0x05, 0x00, 0x13, 0x9e, 0x01, 0x76
    2015-11-11 11:37:51.368 Detail, Node014, ZW_SEND_DATA Request with callback ID 0x9e received (expected 0x9e)
    2015-11-11 11:37:51.369 Info, Node014, WARNING: ZW_SEND_DATA failed. No ACK received – device may be asleep.
    2015-11-11 11:37:51.369 Info, Node014, Node 14 has been marked as asleep
    2015-11-11 11:37:51.369 Info, Node014, Node not responding – moving message to Wake-Up queue: WakeUpCmd_IntervalGet (Node=14): 0x01, 0x09, 0x00, 0x13, 0x0e, 0x02, 0x84, 0x05, 0x25, 0x9e, 0xd3
    2015-11-11 11:37:51.369 Info, Node014, Node not responding – moving QueryStageComplete command to Wake-Up queue
    2015-11-11 11:37:51.369 Detail, Node014, Notification: Notification – Node Asleep
    2015-11-11 11:37:51.464 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:38:07.359 Detail, Node014, Queuing (Controller) Has Node Failed
    2015-11-11 11:38:07.359 Info, Requesting whether node 14 has failed
    2015-11-11 11:38:07.359 Detail, contrlr, Queuing (Command) ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x0e, 0x97
    2015-11-11 11:38:07.359 Detail, Notification: ControllerComand – Starting
    2015-11-11 11:38:08.355 Info, mgr, Manager::WriteConfig completed for driver with home ID of 0xf5c2c88b
    2015-11-11 11:38:14.563 Detail,
    2015-11-11 11:38:14.563 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x62) – ControllerCommand_HasNodeFailed: 0x01, 0x04, 0x00, 0x62, 0x0e, 0x97
    2015-11-11 11:38:14.569 Detail, contrlr, Received: 0x01, 0x04, 0x01, 0x62, 0x01, 0x99
    2015-11-11 11:38:14.569 Detail,
    2015-11-11 11:38:14.569 Warning, Node014, WARNING: Received reply to FUNC_ID_ZW_IS_FAILED_NODE_ID – node 14 failed
    2015-11-11 11:38:14.569 Error, Node014, ERROR: node presumed dead
    2015-11-11 11:38:14.569 Warning, CheckCompletedNodeQueries m_allNodesQueried=1 m_awakeNodesQueried=1

    G

    In reactie op: Trouble including the Fibaro Smoke Sensor #1622
    Avatar
    guillaume
    Bijdrager

    How can I get the beta version?

    G

    In reactie op: Trouble including the Fibaro Smoke Sensor #1617
    Avatar
    guillaume
    Bijdrager

    Hello,
    I am experiencing the same issue. At some time I was able to add the device but the version was never recognized. So far I was not able to make it work…

    G

11 berichten aan het bekijken - 1 tot 11 (van in totaal 11)