hgravatar

Aangemaakte reacties

15 berichten aan het bekijken - 1 tot 15 (van in totaal 30)
  • Auteur
    Berichten
  • In reactie op: Imperihome stops when used #4055
    Avatarhgravatar
    Bijdrager

    Hello Djandib and Rens,

    Thanks for the tips. Unfortunately I can’t get it to work. In Pulse Station the Greenwave is recognized and registered as Binary Power Switch in the Zwave list. I can turn it on and off on the Pulse Station Dashboard. But when I try to access it through the Imperihome app the Imperihome service stops and it doesn’t respond. The switch keeps working via the PulseStation dashboard though. I checked the DevSwitch settings in PulseStation. They are the same as you have Djandib.

    I’m lost. Right now I login to the Dashboard interface of PulseStation to turn the lights on and off, but that takes too much time as I have to login every time by hand. Anymore ideas?

    Thanks in advance,

    Henri

    In reactie op: Connecting Philips Hue with ifttt #3694
    Avatarhgravatar
    Bijdrager

    Hello Koen,

    any progress on the development of a native Hue support? Since the update of DSM 6 I couldn’t get PulseStation working, so I abandoned the product for awhile. But I managed to get PulseStation working again this week, so I was curious how the development is going. Hope to hear from you. And thanks for the great product.

    Kind regards,

    Henri

    In reactie op: Problem with DSM 6 installation #3692
    Avatarhgravatar
    Bijdrager

    Thanks K.Rens,

    installing Webstation worked for me also. It runs okay now. I’m back online 🙂

    In PackageStation of the Synology it still says it doesn’t run though. Minor detail I guess.

    Kind regards,

    Henri

    In reactie op: Problem with DSM 6 installation #3163
    Avatarhgravatar
    Bijdrager

    Thanks Mika for the info. I tried it. It didn’t give me a message in the terminal. However, I still can’t start Pulse Station. I only tried the second command, because I already did the first command. I thought to do all the commands once again. Now I get the following message though after the first command in the terminal:
    “mv: cannot stat ‘/usr/bin/php’: No such file or directory”

    Any ideas?

    Kind regards, Henri

    In reactie op: Adding Foscam C1? #2413
    Avatarhgravatar
    Bijdrager

    I created a different support post for the problem with the virtual url: https://www.pulse-station.com/nl/forums/topic/virtual-url-bug/

    In reactie op: Connecting Philips Hue with ifttt #2412
    Avatarhgravatar
    Bijdrager

    Hi Koen,

    I will take a look at the post this week.

    Kind regards,

    Henri

    In reactie op: Virtual url bug? #2411
    Avatarhgravatar
    Bijdrager

    Yes, it works 🙂

    Thanks for the great work!

    In reactie op: Connecting Philips Hue with ifttt #2393
    Avatarhgravatar
    Bijdrager

    It has some lag. About 3 to 4 seconds. But when I’m turning the lights off or on by using the webservice from hue (my.meethue.com) it has about the same lag. It might be irritating when the light needs to go on when you enter a room, but I haven’t tried that yet.

    Kind regards,
    Henri

    In reactie op: Virtual url bug? #2392
    Avatarhgravatar
    Bijdrager

    Thanks for the update, K.Rens. I’m very curious what I need to change inside the panel settings. Just let me know. It will save me a lot of time if I just can start my camera’s with one click instead of 5.

    Kind regards,

    Henri

    In reactie op: Connecting Philips Hue with ifttt #2385
    Avatarhgravatar
    Bijdrager

    Hi K.Rens,

    Thanks for the update. I can imagine that it’s hard to develop without a Philips Hue system. I’m looking forward to your result!

    I’ve got the ifttt method to work though, so in the meantime I will use that.

    Kind regards, Henri

    In reactie op: Connecting Philips Hue with ifttt #2375
    Avatarhgravatar
    Bijdrager

    Hi Mikael,

    thanks for the link. I’m going to try that.

    Kind regards,

    Henri

    In reactie op: Adding Foscam C1? #2356
    Avatarhgravatar
    Bijdrager

    Hi K.Rens,

    The NAS can reach the camera IP. It can show a picture in the camera panel, so that works. And it does set the parameters of the camera. However, it doesn’t do it through the dashboard one_button panel, only through the virtual device properties page. Might this be a bug.

    I’ve entered the url on the properties page of the virtual url device. When I click to update the value in url.one.send field, it changes the parameters. So it turns the camera detection on. However, when I save it and use the one-button panel created for this virtual url device, it doesn’t do anything.

    What am I doing wrong?

    Kind regards,

    Henri

    In reactie op: Adding Foscam C1? #2355
    Avatarhgravatar
    Bijdrager

    Hi chigagolandjim,

    Did you follow the instructions of K.Rens from the post of 25th of december? I got it to work by following those instructions. It didn’t work at first, because I used the wrong IP. I used the IP of the NAS instead of the camera.

    You should put the URL on the properties page of the virtual camera device:

    Camera.url: http://192.168.1.xxx
    Camera.port: 88
    Camera.flux: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=YOUR_USERNAME&pwd=YOUR_PASSWORD&t=

    If you create a camera panel and choose the correct device in the DEVICE (optional) field, it should work.

    In reactie op: Adding Foscam C1? #2339
    Avatarhgravatar
    Bijdrager

    Hello K.Rens,

    Can you tell me how I can do that? I’m a newby to the Synology world 😉

    Did you get your Foscam running already?

    Kind regards,

    Henri

    In reactie op: Adding Foscam C1? #2303
    Avatarhgravatar
    Bijdrager

    Hello Mika,

    thanks for your answer. I already have the camera showing a live picture on the dashboard by using the virtual device camera and the camera panel. The virtual device only shows the camera. I want to be able to turn it on/off remotely. Hence, K.Rens advised to use the virtual url. I have the correct url, because it works when I use it in the browser. But when I’m trying to add it as a virtual url in PulseStation and the one-button panel, it doesn’t work. I use the exact url that works in safari. See also my previous post above. What am I doing wrong?

15 berichten aan het bekijken - 1 tot 15 (van in totaal 30)