The Fibaro 2×1,5kW module is a built-in relay circuit breaker switch.
This Double Switch 2 module can control two loads up to 1.5KW (6.5A) each.
- Enables Z-Wave control of two independent lights or appliances
- 6.5A per channel and 10A total load.
- Very small size enables modules to fit into standard switch boxes (45mm recommended)
- Latest generation Z-Wave 500 series chip & Z-Wave Plus protocol
- Energy and power measurement of connected devices
- Supports secure mode (Z-Wave Network Security) encrypted with
A New Generation of Relay Switch Modules
Double Switch 2 was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills.
Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!
This Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to operate two independent devices of 1,5kW combined power output.
- Super small device: only 42,5mm x 38,25mm x 20,3mm.
- Fits in standard wall switch boxes Ø ≥45mm
- Z-wave frequency: 868,4 MHz
Double Switch 2 is equipped with sockets that have an increased cross-section which allows you to connect it to wires with a larger diameter and simplify the installation process.
User-friendly Configuration Menu
A built-in RGB diode is of invaluable assistance during the installation process. The light will show whether Double Switch 2 has been added or removed from the network. You can also see whether a calibration or an update was successful.
A Stronger Signal
Double Switch 2 has an increased signal range which gives you more installation possibilities and an increased network coverage.
Easy to Mount
Just place the module in the junction box and connect it to an existing installation.
The module’s miniature size allows you to place it in many convenient spots.
Even the most complex actions can be activated via a wall switch connected to a module. With just a press of the button when entering a room, it’s as natural as turning on the lights.
Double Switch 2 features many safety measures that prevent it from voltage drop, overheating, or overcharging. In the case of any of these events, the system can immediately send you a notification.
Notification about Unused Devices
Double Switch 2 allows you to monitor electrical devices that are currently inactive. The system will notify you if you leave a device running and allow you to turn it off remotely.
Automated Water Flow Cut-off
A Flood Sensor in conjunction with an electrovalve and the Double Switch 2 module will protect your home against flooding, boasting the highest level of efficacy possible.
Takes Care of Your Kids
Are you a parent or do you plan to become one in the near future? Monitoring your children’s study and play time, along with the ability to automatically activate their favorite multimedia might interest you.
Your Home is Wherever You Are
Double Switch 2 module, just like the entire FIBARO system, can be controlled from any place on earth. All you need is internet access.
Note: This module requires 3-wire (including neutral) installation. The output is not potential-free, it does not allow to control a dry contact or load another supply voltage than the input.